{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILA2T571PC1F0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILA2T571PC1F0","canonicalUrl":"https://aoctrl.com/schneider/ILA2T571PC1F0","factsUrl":"https://aoctrl.com/api/mcp/products/ILA2T571PC1F0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium ILA ILA2T571PC1F0 AC synchronous servo motor with brake, 0.44 N.m nominal torque, 3200 rpm at 24 V, 57 mm flange, single-turn encoder.","salesMarkdown":"## Where it sits on the machine The ILA2T571PC1F0 is a Lexium ILA AC synchronous servo motor with an integrated holding brake, designed to drop into the compact 57 mm flange mounting pattern typical of indexing tables, small pick-and-place axes, and packaging-machine cam followers where a braking fail-safe is wanted without an extra panel enclosure. Flange mounting with a 20 mm shaft length and a 9 mm untapped shaft end means it bolts straight to the driven load, so the retrofit question really comes down to whether the existing bracket has the same 57 mm register — meet it where it is and a 1990s axis gets modern motion without rewiring the cabinet. ## Torque, speed, brake envelope Nominal torque is 0.44 N.m (3.89 lbf.in), with a peak stall of 0.62 N.m (5.49 lbf.in), so the part is sized for low-inertia indexing duty rather than continuous heavy pulling — pick a larger frame when the cycle torque spends most of its time over the 0.44 N.m line. Rated speed is 3200 rpm at 24 V and steps up to 5100 rpm at 48 V, which lines up with the Lexium ILA drive family's DC bus range rather than a fixed AC mains input — confirm the drive output rating before assuming a higher-speed profile. The holding brake delivers 1.2 N.m (10.6 lbf.in) of static holding torque, releases in 14 ms, and pulls in at 10 W, so it cuts power quickly enough for a vertical-axis anti-drop function but does not double as a dynamic braking resistor — heat from repeated rapid stops still walks back into the motor housing. ## Feedback and protection floor Position feedback is a single-turn encoder with a stated accuracy of +/- 0.05 degrees, which is sufficient for point-to-point indexing and cam profiling but does not retain absolute position across a power cycle; if the line needs to know where it is after an E-stop, the controller has to home the axis on restart. Built-in protection covers short circuit of the output voltage, overload of output voltage, and safe torque off (STO), so the drive interface handles the wiring-side faults that would otherwise be caught externally — STO lets the safety circuit drop torque without cutting bus power. Cooling is natural convection only, with current consumption capped at 5000 mA continuous and 7000 mA peak; a sealed enclosure derates the allowable cycle rate, and a fan-forced housing or higher-duty frame should be substituted if the ambient inside the cabinet trends above the 15-85% non-condensing humidity envelope the motor is rated for. ## Compliance record on the nameplate Marking is CE, and the motor is tested to EN 61800-3: 2001-02, IEC 61800-3 second environment, IEC 50347, IEC 60072-1, and IEC 50178, which covers EMC in industrial (second-environment) installations and the dimensional/mechanical interface standards for small-frame rotating machines. Shock resistance is 150 m/s² for 1000 shocks (IEC 60068-2-29) and vibration resistance is 20 m/s² across 10-500 Hz (IEC 60068-2-6), so the unit survives press-side mounting and high-cycle pneumatic neighbours without a separate shock mount. ## Wiring footprint and commissioning notes Connection is via an industrial connector rather than a fixed conduit, and four signal lines are available as programmable inputs or outputs — so a single cable harness carries power, feedback, the brake, and the four I/O channels, simplifying the panel-side gland layout. Network throughput is 10/100 Mbits on the integrated comms port, so the drive+motor pair talks standard industrial Ethernet speeds and slots into a Lexium ILA commissioning toolchain without a separate gateway. The motor package measures 190.8 mm in length and ships one unit per package, so the bracket clearance and the spare-parts shelf footprint match a 7.5 in long small-frame servo — useful to know when a kitting cabinet drawers a sibling part for an MRO swap.","metaTitle":"Schneider ILA2T571PC1F0 Servo Motor w/ Brake, 0.44 N·m","metaDescription":"Schneider ILA2T571PC1F0 Lexium ILA AC synchronous servo motor with brake, single-turn encoder, 0.44 N·m nominal torque, sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Single phase","title":"ILA2T571PC1F0","Length":"7.5 in (190.8 mm)","Marking":"CE","Category":"US1PC5618288","Shaft end":"Untapped","Standards":"EN 61800-3 : 2001-02 IEC 50347 IEC 61800-3 EN 61800-3:2001, second environment IEC 61800-3, Ed 2 IEC 60072-1 IEC 50178","Motor Type":"AC Synchronous Servo Motor","description":"integrated drive ILA with servo motor - 24..48 V - Modbus TCP - indus connector","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"0.8 in (20 mm)","Winding type":"Medium speed of rotation and medium torque","Feedback type":"Single turn encoder","Gear box type":"Without","Holding brake":"With","Nominal speed":"3200 rpm 24 V 5100 rpm 48 V","Rotor inertia":"0.165 kg.cm²","Accuracy error":"+/- 0.05 °","Holding torque":"10.6 lbf.in (1.2 N.m) holding brake","Nominal torque":"3.89 lbf.in (0.44 N.m)","Shaft diameter":"0.4 in (9 mm)","Protection Type":"Short circuit of the output voltage Overload of output voltage Safe torque off","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks IEC 60068-2-29","Device short name":"ILA","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.2 in (57 mm)","Peak stall torque":"5.49 lbf.in (0.62 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"10, 100 Mbits","Brake release time":"14 ms","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Brake pull-in power":"10 W","Current consumption":"5000 mA maximum continuous 7000 mA peak","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6","Centring collar depth":"0.06 in (1.6 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Brake application time":"13 ms","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"104 N force pressure) 104 N tensile force)","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Modbus TCP, Integrated","Continuous stall torque":"3.89 lbf.in (0.44 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"89 N","Mounting holes diameter":"0.2 in (5.2 mm)","Centring collar diameter":"2.0 in (50 mm)","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"16384 points/turn","[Us] rated supply voltage":"24 V 48 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.6 in (66.6 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/413c6e49327ce5ed7b3feacddce14e87.pdf","sourceUrl":"https://www.se.com/us/en/product/ILA2T571PC1F0/integrated-drive-ila-with-servo-motor-24-48-v-modbus-tcp-indus-connector/"},"ai":{"faq":[{"question":"What is ILA2T571PC1F0's listed phase on the servo motors with brake line?","answer":"The motor is listed as single phase on this Servo Motors with Brake line, with a DC network type on the drive interface — single phase here identifies the family classification, while the drive runs on the DC bus."},{"question":"What is the listed length of ILA2T571PC1F0 on this Servo Motors with Brake line?","answer":"Length is listed as 7.5 in (190.8 mm) on this Servo Motors with Brake line, with a 57 mm flange and a 20 mm shaft — useful for confirming bracket clearance before a drop-in replacement."},{"question":"What compliance documentation is on record for ILA2T571PC1F0?","answer":"Marking is CE, and the motor is tested to EN 61800-3: 2001-02, IEC 61800-3 second environment, IEC 50347, IEC 60072-1, and IEC 50178, with IEC 60068-2-29 shock and IEC 60068-2-6 vibration profiles. RoHS, REACH, and UL are not stated on the record for this order code and are not asserted here."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILA2T571PC1F0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILA2T571PC1F0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}