{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILA2T571TB2A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILA2T571TB2A0","canonicalUrl":"https://aoctrl.com/schneider/ILA2T571TB2A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILA2T571TB2A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium ILA integrated drive servo motor, single-phase DC bus, 0.31 N·m nominal torque, 24/48 V supply, 57 mm flange, multi-turn encoder, ILA2T571TB2A0.","salesMarkdown":"## Footprint, shaft, and how it bolts onto the machine The ILA2T571TB2A0 ships as a 7.5 in (189.3 mm) long AC synchronous servo with a 2.2 in (57 mm) flange face, an untapped 0.4 in (9 mm) shaft that protrudes 0.8 in (20 mm), and a 0.06 in (1.6 mm) centring collar — a compact footprint for the Lexium integrated drive line that bolts straight onto the gearbox or pinion carrier without an extra coupling adaptor. ## What the electrical envelope actually means on the bench It is a single-phase DC bus device with 18–55.2 V supply limits, and the winding is the high-speed / medium-torque variant — nominal speed 5000 rpm at 24 V or 7000 rpm at 48 V, so the 48 V rail is the one to spec when the line needs the upper rev band. Continuous current draw tops out at 7500 mA with 11000 mA peak, and the natural-convection cooling means no fan filter to clean on a washdown line — the motor relies on its housing surface and the machine's airflow to dump heat. Feedback is a multi-turn encoder with ±0.05° accuracy error, and the integrated drive exposes 4 signals usable as input or output for end-of-travel, home, or enable wiring without dropping in a separate I/O brick. ## Built-in protection and the standards it ships under Protection covers output overvoltage, short-circuit of the output stage, and safe torque off — STO is wired into the drive rather than relying on the upstream contactor, which simplifies the safety circuit on a guarding retrofit. The unit carries CE marking and is qualified to EN/IEC 50178, IEC 61800-3 (Ed 2), IEC 60072-1, EN 50347, and EN 61800-3:2001 second environment — that second-environment EMC classification is the figure that matters when the drive is mounted inside an industrial cabinet rather than on the open factory floor. ## Mechanical life and the duty the bearings will take Shock rating is 150 m/s² for 1000 shocks and vibration is 20 m/s² across 10–500 Hz per EN/IEC 60068-2-6/29, with a 20000 h bearing service life — the figure to budget against when sizing a preventive-replacement interval on a high-cycle axis. Operating altitude is ≤1000 m without derating and humidity is 15–85 % non-condensing, so sealed enclosures are needed for outdoor or refrigerated deployments above that ceiling.","metaTitle":"Schneider ILA2T571TB2A0 Servo Motor, 0.31 N·m, 24/48 V","metaDescription":"Schneider Electric Lexium ILA integrated drive servo motor, 0.31 N·m nominal, 24 V / 48 V DC bus, multi-turn encoder, flange mount. Quoted to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Single phase","title":"ILA2T571TB2A0","Length":"7.5 in (189.3 mm)","Marking":"CE","Category":"US1PC5618288","Shaft end":"Untapped","Standards":"EN/IEC 50178 IEC 61800-3, Ed 2 IEC 60072-1 EN/IEC 61800-3 EN 50347 EN 61800-3 : 2001-02 EN 61800-3:2001, second environment","Motor Type":"AC Synchronous Servo Motor","description":"integrated drive ILA with servo motor - 24..48 V - Modbus TCP - PCB connector","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"0.8 in (20 mm)","Winding type":"High speed of rotation and medium torque","Feedback type":"Multi turn encoder","Gear box type":"Without","Holding brake":"Without","Nominal speed":"5000 rpm 24 V 7000 rpm 48 V","Rotor inertia":"0.095 kg.cm²","Accuracy error":"+/- 0.05 °","Nominal torque":"2.74 lbf.in (0.31 N.m)","Shaft diameter":"0.4 in (9 mm)","Protection Type":"Overload of output voltage Safe torque off Short circuit of the output voltage","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILA","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.2 in (57 mm)","Peak stall torque":"3.98 lbf.in (0.45 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"10, 100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"11000 mA peak 7500 mA maximum continuous","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.06 in (1.6 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"104 N force pressure) 104 N tensile force)","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Modbus TCP, Integrated","Continuous stall torque":"2.74 lbf.in (0.31 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"89 N","Mounting holes diameter":"0.2 in (5.2 mm)","Centring collar diameter":"2.0 in (50 mm)","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"16384 points/turn x 4096 turns","[Us] rated supply voltage":"48 V 24 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.6 in (66.6 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ec4941a0aab9e5eaba3b338495456885.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILA2T571TB2A0/integrated-drive-ila-with-servo-motor-24-48-v-modbus-tcp-pcb-connector/"},"ai":{"faq":[{"question":"Who supplies ILA2T571TB2A0 and how is it quoted for volume purchases?","answer":"For MRO quantities we work against a single-unit pack (1 per pkg) and scale from there."},{"question":"What is ILA2T571TB2A0's listed phase on this Servo Motors with Brake line?","answer":"Single phase — the DC bus is fed from a single-phase supply rail, with drive network type listed as DC rather than AC three-phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILA2T571TB2A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILA2T571TB2A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}