{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILA2T571TC2A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILA2T571TC2A0","canonicalUrl":"https://aoctrl.com/schneider/ILA2T571TC2A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILA2T571TC2A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium integrated drive ILA2T571TC2A0, AC synchronous servo motor, 0.31 N·m nominal, 5000 rpm, multiturn encoder, flange mount, 189.3 mm length.","salesMarkdown":"## Lexium ILA integrated drive, sized for small-motion loads The ILA2T571TC2A0 is the ILA device short name from the Lexium integrated drive range — an AC synchronous servo motor with the drive electronics packaged onto the motor, not a separate cabinet module, which is what cuts the panel footprint for short-cable, low-axis machines. It is wound for high rotational speed and medium torque (cite:), with a 57 mm motor flange and an overall length of 7.5 in (189.3 mm) (cite:) (cite:), and ships without a holding brake (cite:) — a fact that matters at commissioning because any vertical-axis application has to be re-evaluated against an external brake or gravity-loaded gear train. ## DC bus, current draw, and what to budget at power-up The unit is DC-fed through an industrial connector (cite:) with supply limits of 18 to 55.2 V (cite:) — the wider window lets the same SKU ride a 24 V machine bus or a 48 V motion bus. Peak current draw is 11000 mA, with a maximum continuous of 7500 mA (cite:), which is the figure the upstream PSU and fusing have to clear, not the nominal rating. Built-in protections cover overload on the output voltage, short circuit of the output voltage, and safe torque off (cite:), so the drive stops cleanly on a commanded STO event without needing a separate safety contactor upstream of the bus — important at handover when the safety circuit is being walked through. Four signals, each usable as input or output (cite:), carry the local I/O without an expansion module, and 10/100 Mbit comms (cite:) cover the fieldbus side. ## Mechanical interface and feedback Flange mounting with a 9 mm shaft and 20 mm shaft length (cite:) (cite:) suits the standard small-footprint coupling-and-bracket pattern — no tapped shaft end (cite:), so a keyed or clamped hub is the way to take torque off. The centring collar depth is 1.6 mm (cite:), which dictates how far the mating face sits back from the motor pilot. Position feedback is a multiturn encoder (cite:), so absolute position survives a power cycle without a homing routine — fewer gotchas at restart, fewer reasons to spend a Saturday on site because the machine forgot where it was. Bearing service life is rated 20000 h (cite:), which is the maintenance interval the MRO planner should be tracking on a multi-shift line. ## Environmental envelope and the standards on file Cooling is natural convection (cite:), so the drive must be mounted on a thermally conductive surface or with clear airspace around the housing — no fan to fail, but also no margin for stacking tightly in a sealed cabinet. Compliance is recorded against IEC 61800-3 Ed 2, EN/IEC 61800-3, IEC 60072-1, EN 50347, EN/IEC 50178, and EN 61800-3:2001 second environment (cite:), with CE marking (cite:). That second-environment classification under EN 61800-3:2001 is what allows the drive in light-industrial installations without the heavier filter set a first-environment EMC requirement would impose.","metaTitle":"Schneider ILA2T571TC2A0 Lexium servo, 0.31 N·m, 5000 rpm","metaDescription":"Schneider ILA2T571TC2A0 Lexium integrated drive servo motor, 0.31 N·m nominal, 5000 rpm at 24 V, multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Single phase","title":"ILA2T571TC2A0","Length":"7.5 in (189.3 mm)","Marking":"CE","Category":"US1PC5618288","Shaft end":"Untapped","Standards":"IEC 61800-3, Ed 2 EN/IEC 61800-3 IEC 60072-1 EN 50347 EN/IEC 50178 EN 61800-3:2001, second environment EN 61800-3 : 2001-02","Motor Type":"AC Synchronous Servo Motor","description":"integrated drive ILA with servo motor - 24..48 V - Modbus TCP - indus connector","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"0.8 in (20 mm)","Winding type":"High speed of rotation and medium torque","Feedback type":"Multi turn encoder","Gear box type":"Without","Holding brake":"Without","Nominal speed":"5000 rpm 24 V 7000 rpm 48 V","Rotor inertia":"0.095 kg.cm²","Accuracy error":"+/- 0.05 °","Nominal torque":"2.74 lbf.in (0.31 N.m)","Shaft diameter":"0.4 in (9 mm)","Protection Type":"Overload of output voltage Short circuit of the output voltage Safe torque off","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILA","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.2 in (57 mm)","Peak stall torque":"3.98 lbf.in (0.45 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"10, 100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"11000 mA peak 7500 mA maximum continuous","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.06 in (1.6 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"104 N force pressure) 104 N tensile force)","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Modbus TCP, Integrated","Continuous stall torque":"2.74 lbf.in (0.31 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"89 N","Mounting holes diameter":"0.2 in (5.2 mm)","Centring collar diameter":"2.0 in (50 mm)","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"16384 points/turn x 4096 turns","[Us] rated supply voltage":"24 V 48 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.6 in (66.6 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/93ebe1855aff27660b765c53ee504e47.pdf","sourceUrl":"https://www.se.com/vn/en/product/ILA2T571TC2A0/integrated-drive-ila-with-servo-motor-24-48-v-modbus-tcp-indus-connector/"},"ai":{"faq":[{"question":"What is ILA2T571TC2A0's listed phase and supply configuration?","answer":"The drive is a single-phase, DC-fed servo (cite:) (cite:) — the AC-to-DC conversion happens upstream of the motor, and the drive itself runs on 18 to 55.2 VDC (cite:). It is not a directly-on-mains three-phase servo."},{"question":"What is the overall length of the ILA2T571TC2A0 servo?","answer":"Length is 7.5 in (189.3 mm) (cite:), on a 57 mm motor flange (cite:) — the dimension panel builders need to verify against the machine envelope before specifying."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILA2T571TC2A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILA2T571TC2A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}