{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILE2P661PB1A2","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILE2P661PB1A2","canonicalUrl":"https://aoctrl.com/schneider/ILE2P661PB1A2","factsUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PB1A2","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium integrated drive ILE2P661PB1A2, brushless DC servo motor with 38:1 planetary gearbox, 7.3 N.m nominal torque, 24/48 VDC, keyed 10 mm shaft, 66 mm flange, CE marked.","salesMarkdown":"## Where this drive mounts and how it talks The ILE2P661PB1A2 is a Schneider Electric Lexium integrated drive — a brushless DC servo motor with its drive electronics packaged in the same housing. A 66 mm flange and keyed 10 mm shaft drop onto a standard NEMA-style mount plate, and the 174 mm body length fits alongside comparable ILE-family gearheads without re-machining the panel cutout. Connection is through a printed-circuit-board connector; the network is a DC bus, single-phase input, with four signals available as either input or output for end-of-travel, brake release, or pulse-direction handshaking. Natural convection cooling keeps the package sealed — no fan cutout in the surrounding enclosure wall. ## Gearhead, torque envelope and rotor inertia A 3-stage straight-tooth gearhead with a 38:1 (75:2) reduction sits behind the motor, sized for medium speed and medium torque applications such as conveyor indexing, valve actuation, or small-format diverters. Nominal torque is 7.3 N.m at both 24 V and 48 V, with a peak stall ceiling of 13.07 N.m at either supply — the supply swap is a current-budget decision, not a torque-budget one. Continuous output reaches 95 W at 24 V and 119 W at 48 V, so the higher rail earns roughly 25 % more mechanical power for the same gearbox. Nominal speed lands at 107 rpm at 24 V and 133 rpm at 48 V; current draw peaks at 7 A with 5.5 A maximum continuous, so the upstream DC supply needs a 24/48 V rail sized for that continuous envelope with peak headroom. ## Integrated safety and signal I/O Protection is built into the drive itself: safe torque off (STO) lets a safety circuit remove torque without cutting bus power, and the output stage is guarded against output short-circuit and overload conditions. Four programmable I/O signals double as inputs or outputs, so a single wire pair can serve as enable, fault, or pulse-following depending on the commissioning profile. Position feedback is a BLDC encoder on the motor shaft. With a positioning accuracy of ±0.5 point and no holding brake or second shaft end on this build, the unit suits applications where the gearbox's natural back-driving resistance holds position at standstill and the load is non-vertical. ## Compliance and environmental envelope CE marking is declared, and the drive is designed against EN/IEC 61800-3 (including the 2001 second-environment edition), EN 50178, EN 50347 and IEC 60072-1 — the standard set for adjustable-speed drives in industrial panels. ## Sourcing posture for this build Lifecycle stage is logged as current on the official record. No stock-holding claim is made here.","metaTitle":"Schneider ILE2P661PB1A2 Lexium Integrated Drive, 38:1","metaDescription":"Schneider Electric ILE2P661PB1A2 Lexium integrated drive: 38:1 gearbox, 7.3 N.m nominal, 24/48 VDC, CE, integrated STO. Quoted to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"Phase":"Single phase","title":"ILE2P661PB1A2","Length":"6.9 in (174 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Key width":"0.6 in (16 mm)","Shaft end":"Keyed","Standards":"EN/IEC 61800-3 IEC 61800-3, Ed 2 EN 50347 EN 61800-3 : 2001-02 EN/IEC 50178 IEC 60072-1 EN 61800-3:2001, second environment","Motor Type":"Brushless DC motor","description":"brushless dc motor 24..48 V - Ethernet Powerlink interface - L = 174 mm - 38:1","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.0 in (25 mm)","Winding type":"Medium speed of rotation and medium torque","Detent torque":"26.6 lbf.in (3 N.m)","Feedback type":"BLDC encoder","Gear box type":"Straight teeth gear, 3 stages","Holding brake":"Without","Nominal speed":"107 rpm 24 V 133 rpm 48 V","Rotor inertia":"211 kg.cm²","Accuracy error":"+/- 0.5 point","Nominal torque":"64.6 lbf.in (7.3 N.m) 24 V 64.6 lbf.in (7.3 N.m) 48 V","Shaft diameter":"0.4 in (10 mm)","Protection Type":"Short circuit of the output voltage Overload of output voltage Safe torque off","Reduction ratio":"38:1 (75:2)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILE","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.6 in (66 mm)","Peak stall torque":"115.68 lbf.in (13.07 N.m) 24 V 115.68 lbf.in (13.07 N.m) 48 V","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7000 mA peak 5500 mA maximum continuous","Nominal output power":"119 W 48 V 95 W 24 V","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"2500 h bearing short-term operation 15000 h bearing long-term operation","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"10 N long-term operation) 80 N short-term operation)","Maximum supply current":"0.1 A power stage disabled) 6.8 A 24 V 3.8 A 48 V","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"73.5 lbf.in (8.3 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"200 N long-term operation) 200 N short-term operation)","Mounting holes diameter":"0.2 in (4.4 mm)","Centring collar diameter":"0.6 in (16 mm)","Maximum mechanical speed":"133 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"12 points/turn motor 0.8° gearbox output","[Us] rated supply voltage":"48 V 24 V","Maximum torsional backlash":"1 °","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.90 in (73.54 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ced7df281feb1c516a449fa4bf60200e.pdf","sourceUrl":"https://www.se.com/us/en/product/ILE2P661PB1A2/brushless-dc-motor-24-48-v-ethernet-powerlink-interface-l-174-mm-381/"},"ai":{"faq":[{"question":"What is ILE2P661PB1A2's listed phase and supply?","answer":"The drive is specified as single-phase on a DC bus network. Nominal operating points are given for both 24 V and 48 V rails, with continuous output of 95 W at 24 V and 119 W at 48 V."},{"question":"What is the body length and flange size of ILE2P661PB1A2?","answer":"Body length is 174 mm (6.9 in) on a 66 mm (2.6 in) motor flange, with a keyed 10 mm shaft of 25 mm length and a 16 mm key."},{"question":"What compliance documentation ships with ILE2P661PB1A2?","answer":"The drive carries CE marking and is designed against EN/IEC 61800-3 (including the 2001 second-environment edition), EN 50178, EN 50347 and IEC 60072-1. The specific declaration package — DoC, REACH, RoHS — is supplied with the shipment at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILE2P661PB1A2","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILE2P661PB1A2 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}