{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILE2P661PB1A7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILE2P661PB1A7","canonicalUrl":"https://aoctrl.com/schneider/ILE2P661PB1A7","factsUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PB1A7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium ILE ILE2P661PB1A7 integrated servo drive, brushless DC motor, single-phase DC bus, 92:1 worm gear, 9.2 N.m nominal torque, 41 W at 24 V, flange mount.","salesMarkdown":"## Defining motion envelope at 44 rpm with 92:1 reduction The Schneider Electric ILE2P661PB1A7 is a Lexium ILE integrated drive — a brushless DC servo motor with a 3-stage worm gearbox (92:1 reduction) and an onboard motion controller, all on a 66 mm mounting flange. It sits in the Lexium Integrated Drives II family and is built for point-to-point motion where high torque at low speed replaces an external gearhead-and-drive pair. Output is geared to 44 rpm nominal at both 24 V and 48 V supply, which is the speed the worm pair delivers rather than the motor's electrical speed. Nominal torque holds at 81.4 lbf.in (9.2 N.m) across the 18…55.2 V supply range, and the peak stall reaches 175.07 lbf.in (19.78 N.m) — roughly 2× nominal, sized for inertial acceleration profiles on indexing axes. ## Electrical, I/O and protection on the integrated drive Supply is a DC bus with 18…55.2 V limits (24 V or 48 V nominal); peak current is 7000 mA and the maximum continuous draw is 5500 mA. Cooling is natural convection — the 66 mm flange is the only thermal path, so derating above the 1000 m altitude ceiling matters once the cabinet gets warm. Four onboard signals are usable as digital input or output each, and the fieldbus side runs at 100 Mbits. The protection set covers safe torque off, output short circuit and output overload — the trio needed for an STO-capable integrated axis on a packaging or material-handling line. Mechanical side carries a flanged mount with a holed shaft end (no second shaft, no holding brake). ## Standards, category and what sourcing looks like Compliance on the nameplate is CE, and the standards list covers EN 61800-3:2001-02, IEC 60072-1, IEC 61800-3 Ed 2, EN 50347 and EN/IEC 50178 — the EMC and drive-system family that an integrator cites for a CE sub-assembly build. Category 18288 places it inside the Lexium Integrated Drives II range at Schneider. The lifecycle stage is recorded as current on the spec row. Independent distribution handles the ILE2P661PB1A7 against an RFQ — quote-builds the BOM at requested volume and confirms availability when the buyer submits a request; the price/lead-time lands back with the offer.","metaTitle":"Schneider ILE2P661PB1A7 integrated servo drive, 9.2 N.m","metaDescription":"Schneider Electric ILE2P661PB1A7 Lexium ILE integrated drive: brushless DC motor with 92:1 worm gearing, 9.2 N.m nominal torque at 44 rpm, 24/48 V supply.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors"],"specifications":{"Phase":"Single phase","Length":"9.02 in (229 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Shaft end":"Hole","Standards":"EN 61800-3 : 2001-02 IEC 60072-1 IEC 61800-3, Ed 2 EN 50347 EN 61800-3:2001, second environment EN/IEC 50178 EN/IEC 61800-3","Motor Type":"Brushless DC motor","Network type":"DC","Second shaft":"Without second shaft end","Winding type":"Medium speed of rotation and medium torque","Detent torque":"108.9 lbf.in (12.3 N.m)","Feedback type":"BLDC encoder","Gear box type":"Worm gear, 3 stages","Holding brake":"Without","Nominal speed":"44 rpm 24 V 44 rpm 48 V","Rotor inertia":"1270 kg.cm²","Accuracy error":"+/- 1 point","Nominal torque":"81.4 lbf.in (9.2 N.m) 24 V 81.4 lbf.in (9.2 N.m) 48 V","Protection Type":"Safe torque off Short circuit of the output voltage Overload of output voltage","Reduction ratio":"92:1 (735:5)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILE","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.6 in (66 mm)","Peak stall torque":"175.07 lbf.in (19.78 N.m) 24 V 175.07 lbf.in (19.78 N.m) 48 V","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7000 mA peak 5500 mA maximum continuous","Nominal output power":"41 W 24 V 42 W 48 V","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"9000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"80 N","Maximum supply current":"0.1 A power stage disabled) 6.8 A 24 V 2.6 A 48 V","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"102.7 lbf.in (11.6 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"200 N","Mounting holes diameter":"0.2 in (4.4 mm)","Centring collar diameter":"1.4 in (36 mm)","Maximum mechanical speed":"54 rpm","Number of mounting holes":"2","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"12 points/turn motor 0.33° gearbox output","[Us] rated supply voltage":"48 V 24 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0c5e6cdec2b68329af92f6a6e1288c51.pdf","sourceUrl":"https://www.se.com/vn/en/product/ILE2P661PB1A7/brushless-dc-motor-24-48-v-ethernet-powerlink-interface-l-174-mm-921/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PB1A7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy ILE2P661PB1A7 and how do I get a price?","answer":"Independent industrial-automation distribution handles ILE2P661PB1A7 against an RFQ — the BOM quantity and target delivery are submitted, and availability and pricing are confirmed back with the quote. No stock count, lead-time figure, or channel status is asserted on this page."},{"question":"What is ILE2P661PB1A7's listed phase on this Servo Motors line?","answer":"The listed phase is single-phase, with a DC bus network type. The integrated drive runs from a 24 V or 48 V DC supply rather than from a three-phase AC mains feed."},{"question":"What is ILE2P661PB1A7's listed length on this Servo Motors line?","answer":"The listed length is 9.02 in (229 mm) for the integrated assembly as a whole. The motor flange size, by contrast, is 2.6 in (66 mm), so the 229 mm sits along the gearbox-and-control-stack axis rather than across the flange face."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILE2P661PB1A7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILE2P661PB1A7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}