{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILE2P661PC1A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILE2P661PC1A0","canonicalUrl":"https://aoctrl.com/schneider/ILE2P661PC1A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PC1A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric, Lexium ILE integrated drive, brushless DC servo motor, ILE2P661PC1A0, 66 mm flange, 0.26 N.m nominal torque, 24/48 VDC.","salesMarkdown":"## Lexium ILE integrated drive — 66 mm BLDC servo Schneider Electric ILE2P661PC1A0 sits in the Lexium integrated drive line as a brushless DC servo motor with a 66 mm motor flange and a single-phase DC bus interface, designed for cabinet-mounted motion axes where the drive electronics live on the back of the motor itself. ## Torque, speed and power — 24 V versus 48 V bus Continuous torque is rated 0.26 N.m and peak stall torque 0.43 N.m at both 24 V and 48 V supplies, so the motor's mechanical envelope does not shift with bus voltage; nominal speed moves from 4800 rpm at 24 V to 6000 rpm at 48 V, with continuous output power climbing from 131 W to 163 W across the same bus swing. Current draw reaches 7000 mA peak and 5500 mA maximum continuous, which sets the upstream DC supply sizing — the 24 V rail in particular must be rated to deliver that continuous figure with margin for the drive's own inrush, or the bus will sag under acceleration. ## Feedback, protection and field wiring Position feedback comes from an integrated BLDC encoder with ±0.5° accuracy, enough for point-to-point positioning on conveyor indexers, diverters and small-format packaging axes without an external encoder on the load. Built-in protection covers safe torque off, output overvoltage and output short circuit — the three fault classes most likely to trip a commissioning engineer — and the drive exposes 4 signals that each can be configured as input or output for end-of-travel, brake, or ready-state wiring. The motor terminates through an industrial connector rather than a flying lead, which simplifies panel-side replacement and keeps the IP story at the cable end where it belongs. ## Mechanical fit — flange, shaft and panel envelope Flange mounting with a 66 mm motor flange and a 2 mm centring collar depth means the ILE2P661PC1A0 drops into the standard Lexium ILE 66 mm cutout; the 8 mm untapped shaft with 25 mm of stickout accepts a mounted pinion or coupling directly. Overall body length of 122 mm is the dimension to budget against when laying out a row of these motors on a machine bed; with no gearbox and no holding brake fitted, the BOM stays single-piece and the technician is not stranded mid-job hunting for a missing accessory pack. Natural convection cooling rules out a proximate heat source; shock resistance of 150 m/s² for 1000 shocks and vibration of 20 m/s² across 10–500 Hz put the unit inside the IEC 60068-2 envelope for normal industrial machinery, not high-shock mobile equipment. ## Standards and marking Compliance is declared to EN/IEC 50178, EN 50347, EN/IEC 61800-3 (including the 2001 second-environment edition) and IEC 60072-1, with CE marking on the nameplate — the standards set that an EU machinery panel-builder will ask for on the declaration of conformity file. ## Sourcing posture Quoted to order against the requested volume through independent distribution, with current pricing and lead time confirmed at RFQ; we do not assert stock-holding or channel authorisation.","metaTitle":"Schneider Electric ILE2P661PC1A0 Lexium Servo Motor, 66 mm","metaDescription":"Schneider Electric ILE2P661PC1A0 Lexium integrated drive BLDC servo motor, 66 mm flange, 0.26 N.m nominal torque, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Single phase","Length":"4.8 in (122 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Shaft end":"Untapped","Standards":"EN/IEC 50178 EN 50347 EN 61800-3 : 2001-02 EN 61800-3:2001, second environment EN/IEC 61800-3 IEC 60072-1 IEC 61800-3, Ed 2","Motor Type":"Brushless DC motor","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.0 in (25 mm)","Winding type":"Medium speed of rotation and medium torque","Detent torque":"0.71 lbf.in (0.08 N.m)","Feedback type":"BLDC encoder","Gear box type":"Without","Holding brake":"Without","Nominal speed":"4800 rpm 24 V 6000 rpm 48 V","Rotor inertia":"0.17 kg.cm²","Accuracy error":"+/- 0.5 °","Nominal torque":"2.30 lbf.in (0.26 N.m) 24 V 2.30 lbf.in (0.26 N.m) 48 V","Shaft diameter":"0.3 in (8 mm)","Protection Type":"Safe torque off Overload of output voltage Short circuit of the output voltage","Reduction ratio":"1:1","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILE","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.6 in (66 mm)","Peak stall torque":"3.81 lbf.in (0.43 N.m) 24 V 3.81 lbf.in (0.43 N.m) 48 V","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7000 mA peak 5500 mA maximum continuous","Nominal output power":"131 W 24 V 163 W 48 V","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"30 N force pressure) 30 N tensile force)","Maximum supply current":"0.1 A power stage disabled) 6.8 A 24 V 3.8 A 48 V","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"2.48 lbf.in (0.28 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"80 N","Mounting holes diameter":"0.2 in (4.4 mm)","Centring collar diameter":"1.6 in (40 mm)","Maximum mechanical speed":"6500 rpm 7000 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"12 points/turn","[Us] rated supply voltage":"48 V 24 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.90 in (73.54 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47521b41c7650cccfc2417955b76ad94.pdf","sourceUrl":"https://www.se.com/vn/en/product/ILE2P661PC1A0/brushless-dc-motor-24-48-v-ethernet-powerlink-interface-l122mm-w-o-gearbox/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PC1A0/alternatives.json"},"ai":{"faq":[{"question":"What is ILE2P661PC1A0's listed phase on this Servo Motors line?","answer":"The drive is rated single phase on a DC bus network, which in the Lexium ILE context means a single DC-link rail (24 V or 48 V) feeding the integrated electronics — not an AC mains input."},{"question":"What is ILE2P661PC1A0's listed length?","answer":"Body length is 122 mm (4.8 in), measured on the standard Lexium ILE 66 mm flange envelope with no gearbox and no holding brake fitted."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILE2P661PC1A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILE2P661PC1A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}