{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILE2P661PC1A1","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILE2P661PC1A1","canonicalUrl":"https://aoctrl.com/schneider/ILE2P661PC1A1","factsUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PC1A1","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium ILE2P661PC1A1, brushless DC integrated servo drive with 18:1 (160:9) straight-tooth gearhead, 3.5 N·m nominal, 24 V / 48 V, keyed 10 mm shaft, flange mount, 174 mm length.","salesMarkdown":"## What the ILE2P661PC1A1 actually moves The ILE2P661PC1A1 is a Schneider Electric Lexium integrated drive: a brushless DC motor, BLDC encoder feedback, and a three-stage straight-tooth gear reducer packaged on a single 66 mm flange, with the drive electronics sitting behind the motor — so one cable lands power, comms, and the four configurable digital signals on the same industrial connector. Output shaft is 10 mm diameter, keyed 16 mm, 25 mm long, with a 4 mm centring collar — a mechanical envelope a cell designer can drop into a standard 66 mm flange pocket without an external coupling on the light side. ## Speed, torque and the 24 V vs 48 V choice Continuous output power lands at 95 W from a 24 V supply and 119 W at 48 V, while current draw holds inside a 5500 mA continuous / 7000 mA peak envelope — meaning a 48 V cell gains headroom on cycle rate before the drive starts asking the bus for more amps. Reduction ratio is 18:1 (160:9) through three straight-tooth stages; detent torque from the gear sits at 1.42 N·m, so the package is sized for indexing duty and conveyor indexing rather than precision servo point-to-point where backlashed planetary stages are the usual pick. ## Cycle-time handshake and digital I/O Four bidirectional digital signals ride on the same industrial connector — usable as inputs or outputs each — so a cell wiring scheme can route home sensor, end-of-travel, gripper confirmation, and a cycle-start strobe without a separate breakout block. Positioning accuracy is rated at +/- 0.5 point, which for a straight-tooth three-stage reducer is consistent with the indexing and rotary-table work the device is built around rather than a precision servo axis — the right comparator for fit is repeatability of a conveyor-diverter or indexing table, not pick-and-place point accuracy. Communications ride at 100 Mbits on the network port, and the drive handles its own short-circuit, output over-voltage, and overload protection internally — so upstream fusing only needs to clear a drive that already protects itself, simplifying the cabinet selectivity study. ## Mechanical envelope, mounting, environment Flange mount, 66 mm motor flange, 174 mm overall length — the unit is sized for a direct bolt-up to a conveyor frame or rotary indexing table where the integrated gearhead replaces an external right-angle reducer. Cooling is natural convection, so the integrator must keep the housing clear of close-fitting shrouds — derating starts when the surrounding enclosure traps the heat rather than at a hard thermal trip; vibration and shock ratings (20 m/s² over 10–500 Hz, 150 m/s² on 1000 shocks) put the unit inside the IEC 60068-2 envelope for fixed industrial machinery. Operating envelope is 15–85 % RH non-condensing, up to 1000 m altitude without derating — the typical factory-floor window without special provisions. ## Compliance posture Standards list on the nameplate covers EN/IEC 61800-3 (the EMC product standard for adjustable-speed drives, both the Ed 2 and the 2001 second-environment variants), EN/IEC 50178 for power-converter equipment, EN 50347 and IEC 60072-1 for the motor frame, and the unit carries a CE marking.","metaTitle":"Schneider Electric ILE2P661PC1A1 Lexium Integrated Drive","metaDescription":"Schneider Electric ILE2P661PC1A1 Lexium integrated brushless DC servo drive, 18:1 gear, 24/48 V, 3.5 N·m nominal, quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"Phase":"Single phase","title":"ILE2P661PC1A1","Length":"6.9 in (174 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Key width":"0.6 in (16 mm)","Shaft end":"Keyed","Standards":"EN/IEC 61800-3 IEC 61800-3, Ed 2 EN 50347 IEC 60072-1 EN/IEC 50178 EN 61800-3 : 2001-02 EN 61800-3:2001, second environment","Motor Type":"Brushless DC motor","description":"brushless dc motor 24..48 V - Ethernet Powerlink interface - L = 174 mm - 18:1","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.0 in (25 mm)","Winding type":"Medium speed of rotation and medium torque","Detent torque":"12.57 lbf.in (1.42 N.m)","Feedback type":"BLDC encoder","Gear box type":"Straight teeth gear, 3 stages","Holding brake":"Without","Nominal speed":"225 rpm 24 V 281 rpm 48 V","Rotor inertia":"48 kg.cm²","Accuracy error":"+/- 0.5 point","Nominal torque":"31.0 lbf.in (3.5 N.m) 24 V 31.0 lbf.in (3.5 N.m) 48 V","Shaft diameter":"0.4 in (10 mm)","Protection Type":"Safe torque off Short circuit of the output voltage Overload of output voltage","Reduction ratio":"18:1 (160:9)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILE","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.6 in (66 mm)","Peak stall torque":"54.79 lbf.in (6.19 N.m) 24 V 54.79 lbf.in (6.19 N.m) 48 V","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7000 mA peak 5500 mA maximum continuous","Nominal output power":"119 W 48 V 95 W 24 V","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"2500 h bearing short-term operation 15000 h bearing long-term operation","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"10 N long-term operation) 80 N short-term operation)","Maximum supply current":"0.1 A power stage disabled) 6.8 A 24 V 3.8 A 48 V","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"38.06 lbf.in (4.3 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"200 N long-term operation) 200 N short-term operation)","Mounting holes diameter":"0.2 in (4.4 mm)","Centring collar diameter":"0.6 in (16 mm)","Maximum mechanical speed":"281 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"1.667° gearbox output 12 points/turn motor","[Us] rated supply voltage":"48 V 24 V","Maximum torsional backlash":"1 °","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.90 in (73.54 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8cc3720fb4219a132bd289fb624ed91c.pdf","sourceUrl":"https://www.se.com/us/en/product/ILE2P661PC1A1/brushless-dc-motor-24-48-v-ethernet-powerlink-interface-l-174-mm-181/"},"ai":{"faq":[{"question":"What is the listed phase and length on the ILE2P661PC1A1?","answer":"Single-phase operation on a DC bus network, with overall length 6.9 in (174 mm)."},{"question":"What compliance documentation does Schneider Electric provide for the ILE2P661PC1A1?","answer":"The unit carries CE marking and is built to EN/IEC 61800-3 (Ed 2 and 2001 second-environment), EN/IEC 50178, EN 50347, and IEC 60072-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILE2P661PC1A1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILE2P661PC1A1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}