{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILE2P661PC1A4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILE2P661PC1A4","canonicalUrl":"https://aoctrl.com/schneider/ILE2P661PC1A4","factsUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PC1A4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric, Lexium integrated drive ILE2P661PC1A4, brushless DC gearmotor, 115:1 ratio, 12 N.m nominal torque at 24/48 VDC, flange mount, keyed shaft, CE marked.","salesMarkdown":"## Integrated drive with a 115:1 gear head, not a stand-alone motor The ILE2P661PC1A4 is a Lexium integrated drive (device short name ILE, range of product Lexium integrated drive) that bundles a brushless DC motor with a straight-teeth, 4-stage gear box at a 115:1 reduction ratio (3675:32), so the buyer gets a positioning actuator rather than a bare servo to be paired with an external gearbox (cites:,). Flange-mount body, 66 mm motor flange size, 174 mm overall length, keyed shaft with 10 mm diameter, 25 mm shaft length, 16 mm key width, and an industrial connector for power and signal — the unit is built to bolt onto a machine frame and accept a coupling on the output shaft without further mechanical adaptation (cites:,). ## Torque, speed, and accuracy envelope at the geared output Nominal torque is 12 N.m (106.2 lbf.in) at both 24 V and 48 V supplies, and peak stall torque reaches 24.72 N.m (218.79 lbf.in) at the same two supply rails, which gives the integrator a generous service factor above the rated torque for acceleration and shock loads (cites:,). Nominal speed is 35 rpm at 24 V and 44 rpm at 48 V with medium-speed, medium-torque winding; detent torque is 9.19 N.m (81.34 lbf.in), so the gear head holds position when de-energised within that residual torque band (cites:,). Nominal output power is 54 W at 24 V and 68 W at 48 V, drawing 5500 mA maximum continuous and 7000 mA peak from the DC bus — sizing the supply means planning for the peak current rather than the continuous figure when multiple ILE axes start together (cites:,). ## Compliance, protection set, and fieldbus I/O The unit is CE marked and built to EN 50347, EN/IEC 50178, IEC 61800-3 Ed 2 (including EN 61800-3:2001 second environment), and IEC 60072-1, covering the EMC and dimensional expectations for an adjustable-speed drive integrated with a rotating machine (cites:,). Integrated protection covers safe torque off, output voltage overload, and output short circuit — the STO function in particular lets the safety circuit cut torque without removing the logic supply, which is the usual wiring path back to a category-3 or PL d guard on a packaging or materials-handling line (cites:). Four signals that can each be configured as input or output, with a 100 Mbit transmission rate on the fieldbus side, give enough headroom for a remote I/O island or end-of-line indexing without pulling a full PLC rack to the actuator (cites:,). ## Environmental envelope for cabinet or machine-room mounting Flange mounting with a 4 mm centring collar depth sets the registration surface for a mating bracket, and the industrial connector routes the 24/48 V bus and the four configurable signals through one plug rather than a hard-wired pigtail (cites:,).","metaTitle":"Schneider Electric ILE2P661PC1A4 Lexium Integrated Drive","metaDescription":"Schneider Electric ILE2P661PC1A4 Lexium integrated servo drive: brushless DC motor, 115:1 gearing, 12 N.m nominal torque, 24/48 VDC. Quoted to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors"],"specifications":{"Phase":"Single phase","Length":"6.9 in (174 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Key width":"0.6 in (16 mm)","Shaft end":"Keyed","Standards":"EN 50347 EN/IEC 50178 IEC 61800-3, Ed 2 EN 61800-3 : 2001-02 EN 61800-3:2001, second environment EN/IEC 61800-3 IEC 60072-1","Motor Type":"Brushless DC motor","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.0 in (25 mm)","Winding type":"Medium speed of rotation and medium torque","Detent torque":"81.34 lbf.in (9.19 N.m)","Feedback type":"BLDC encoder","Gear box type":"Straight teeth gear, 4 stages","Holding brake":"Without","Nominal speed":"35 rpm 24 V 44 rpm 48 V","Rotor inertia":"1962 kg.cm²","Accuracy error":"+/- 0.5 point","Nominal torque":"106.2 lbf.in (12 N.m) 24 V 106.2 lbf.in (12 N.m) 48 V","Shaft diameter":"0.4 in (10 mm)","Protection Type":"Safe torque off Overload of output voltage Short circuit of the output voltage","Reduction ratio":"115:1 (3675:32)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILE","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.6 in (66 mm)","Peak stall torque":"218.79 lbf.in (24.72 N.m) 24 V 218.79 lbf.in (24.72 N.m) 48 V","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7000 mA peak 5500 mA maximum continuous","Nominal output power":"54 W 24 V 68 W 48 V","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"2500 h bearing short-term operation 15000 h bearing long-term operation","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"10 N long-term operation) 80 N short-term operation)","Maximum supply current":"0.1 A power stage disabled) 6.8 A 24 V 3.8 A 48 V","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"123.9 lbf.in (14 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"200 N long-term operation) 200 N short-term operation)","Mounting holes diameter":"0.2 in (4.4 mm)","Centring collar diameter":"0.6 in (16 mm)","Maximum mechanical speed":"44 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"12 points/turn motor 0.26° gearbox output","[Us] rated supply voltage":"24 V 48 V","Maximum torsional backlash":"1 °","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.90 in (73.54 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1b4e26f4e3e186a56dba3b0dc386f37c.pdf","sourceUrl":"https://www.se.com/vn/en/product/ILE2P661PC1A4/brushless-dc-motor-24-48-v-ethernet-powerlink-interface-l-174-mm-1151/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PC1A4/alternatives.json"},"ai":{"faq":[{"question":"What is ILE2P661PC1A4's listed phase and supply type?","answer":"It is a single-phase, DC-network device — the bus is DC rather than mains AC, and the unit is specified for operation at 24 V or 48 V DC. The motor itself is a brushless DC type (cites:,)."},{"question":"What is ILE2P661PC1A4's overall length?","answer":"The body length is 6.9 in (174 mm), built on a 66 mm (2.6 in) motor flange. That envelope includes the integrated 4-stage gear head rather than a bare motor, so the figure covers the full actuator (cites:,)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILE2P661PC1A4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILE2P661PC1A4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}