{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILE2P661PC1A6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILE2P661PC1A6","canonicalUrl":"https://aoctrl.com/schneider/ILE2P661PC1A6","factsUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PC1A6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium ILE integrated drive, BLDC motor with 3-stage worm gearbox, 6 N.m nominal torque, 75 rpm, 24/48 V DC bus, 66 mm flange, 229 mm length.","salesMarkdown":"## Form factor and mechanical stack Schneider Electric ILE2P661PC1A6 is a Lexium-series integrated drive — a brushless DC motor with a 3-stage worm gearbox and integrated electronics, all in a single 66 mm flange, 229 mm long housing. The 54:1 reduction (1715:32) trades speed for torque at the output shaft, giving a low-speed high-torque package sized for valve, damper, conveyor indexing, and similar positioning duties where a separate gearbox would otherwise be specified. The shaft end is a hole-type (female socket) with no second shaft end and no holding brake, and the gearbox is medium-speed / medium-torque wound, so this build is meant for direct-coupled loads rather than through-shaft or brake-held applications. ## Operating envelope at the shaft At the output shaft the drive delivers 75 rpm nominal and 6 N.m (53.1 lbf.in) of continuous torque at both 24 V and 48 V supply, with a peak stall torque of 13.93 N.m (123.29 lbf.in) — so transient acceleration headroom is roughly 2.3× the running figure before the drive folds back. Detent torque sits at 6.5 N.m, which means the worm gear holds position when de-energized and there is no separate brake needed for static load retention. Mechanical output is 45 W at 24 V and 47 W at 48 V — small drive, sized for low-power positioning rather than continuous-duty material handling. The 6-pole BLDC rotor and ±1 point encoder accuracy define the commutation resolution and positioning repeatability the integrated controller has to work with. ## Electrical bus and protection The bus is DC, with supply voltage limits of 18–55.2 V — covering both 24 V and 48 V DC nominal rails found in mobile equipment, AGV power systems, and industrial cabinet sub-buses. Built-in protection covers short-circuit of the output voltage, output overload, and safe torque off (STO) — STO in particular lets the drive drop into a safety-rated state without an external contactor on the motor leads, which simplifies the safety circuit on guarded machinery. Cooling is natural convection only; no fan, no forced airflow, so cabinet thermal design must leave clearance around the 66 mm flange body. The drive carries four signals, each usable as input or output, and exposes a 100 Mbit/s network port for commissioning and motion control — the industrial connector on the back face is the single landing point for both power and signal. ## Compliance, environment, and endurance Compliance stack covers IEC 61800-3 Ed 2 (the EMC standard for adjustable-speed drives, second-environment use) plus EN/IEC 50178, EN 50347, and IEC 60072-1 — the CE mark is applied accordingly. Shock is rated at 150 m/s² for 1000 shocks and vibration at 20 m/s² across 10–500 Hz, which puts the unit inside mobile-platform and light-industrial mounting envelopes without special isolation.","metaTitle":"Schneider Electric ILE2P661PC1A6 Lexium Drive, 6 N.m, 75 rpm","metaDescription":"Schneider ILE2P661PC1A6 Lexium integrated BLDC drive with 3-stage worm gearbox, 6 N.m nominal at 75 rpm, 18–55.2 V DC bus. Quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors"],"specifications":{"Phase":"Single phase","Length":"9.02 in (229 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Shaft end":"Hole","Standards":"IEC 61800-3, Ed 2 EN 61800-3:2001, second environment EN 61800-3 : 2001-02 IEC 60072-1 EN/IEC 61800-3 EN 50347 EN/IEC 50178","Motor Type":"Brushless DC motor","Network type":"DC","Second shaft":"Without second shaft end","Winding type":"Medium speed of rotation and medium torque","Detent torque":"57.5 lbf.in (6.5 N.m)","Feedback type":"BLDC encoder","Gear box type":"Worm gear, 3 stages","Holding brake":"Without","Nominal speed":"75 rpm 24 V 75 rpm 48 V","Rotor inertia":"430 kg.cm²","Accuracy error":"+/- 1 point","Nominal torque":"53.1 lbf.in (6 N.m) 24 V 53.1 lbf.in (6 N.m) 48 V","Protection Type":"Short circuit of the output voltage Overload of output voltage Safe torque off","Reduction ratio":"54:1 (1715:32)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILE","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.6 in (66 mm)","Peak stall torque":"123.29 lbf.in (13.93 N.m) 24 V 123.29 lbf.in (13.93 N.m) 48 V","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7000 mA peak 5500 mA maximum continuous","Nominal output power":"45 W 24 V 47 W 48 V","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"6000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"80 N","Maximum supply current":"0.1 A power stage disabled) 6.8 A 24 V 2.7 A 48 V","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"70.8 lbf.in (8 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"200 N","Mounting holes diameter":"0.2 in (4.4 mm)","Centring collar diameter":"1.4 in (36 mm)","Maximum mechanical speed":"93 rpm","Number of mounting holes":"2","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"12 points/turn motor 0.56° gearbox output","[Us] rated supply voltage":"48 V 24 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/647ec3a7fa2bf637a6be335f0bd3ea0c.pdf","sourceUrl":"https://www.se.com/vn/en/product/ILE2P661PC1A6/brushless-dc-motor-24-48-v-ethernet-powerlink-interface-l-174-mm-541/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PC1A6/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy ILE2P661PC1A6 and how do I get a price?","answer":"Submit the part number against an RFQ — availability, unit price, and lead time for the configured build are quoted back on the RFQ response. Independent distribution handles current-production Lexium integrated drives against the BOM rather than walk-in retail."},{"question":"What is ILE2P661PC1A6's listed phase on this servo motors line?","answer":"The drive is rated Single phase on the spec sheet, with a DC bus that accepts 18–55.2 V — covering both 24 V and 48 V DC nominal rails."},{"question":"What is ILE2P661PC1A6's listed length on this servo motors line?","answer":"The integrated drive body is 9.02 in (229 mm) long with a 66 mm (2.6 in) motor flange — flange-mounted into the driven load with no second shaft end."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILE2P661PC1A6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILE2P661PC1A6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}