{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILE2P661PC1A7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILE2P661PC1A7","canonicalUrl":"https://aoctrl.com/schneider/ILE2P661PC1A7","factsUrl":"https://aoctrl.com/api/mcp/products/ILE2P661PC1A7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium integrated drive ILE2P661PC1A7, brushless DC servo motor with 3-stage worm gearbox, 9.2 N.m nominal torque, 24/48 VDC, 66 mm flange, 229 mm length.","salesMarkdown":"## Form factor the panel has to accept The ILE2P661PC1A7 is a Lexium integrated drive — a brushless DC servo motor and 3-stage worm gearbox packaged as one unit, sized around a 66 mm motor flange and 229 mm overall length. That integrated form is the defining feature: the drive electronics live on the back of the motor, so the assembly drops into the machine as a single flange-mounted axis rather than a motor-and-drive pair wired across the cabinet. Mounting is flange-style with a hollow shaft end and an industrial connector for the bus and I/O — the gearbox output is the only mechanical interface the machine builder has to design around. CE marked to EN/IEC 61800-3, EN/IEC 50178, EN 50347 and IEC 60072-1, so it sits in a panel built to the usual low-voltage drive practice. ## Geartrain and what the output shaft actually delivers The 92:1 reduction (735:5) turns a medium-speed brushless rotor into a low-speed, high-torque output — nominal speed is 44 rpm at both 24 V and 48 V, nominal torque 9.2 N.m, and peak stall torque 19.78 N.m on either bus voltage. For sizing, treat the 9.2 N.m figure as the continuous working point and the 19.78 N.m peak as the cap for acceleration and shock loads, not the duty rating. Nominal mechanical output is 41 W at 24 V and 42 W at 48 V — useful to know when the gearbox output runs against a holding load, because a worm gear is non-backdrivable by nature and the 108.9 lbf.in (12.3 N.m) detent torque is what keeps the axis from creeping when the bus is off. The unit ships without a second shaft end and without a holding brake. ## Bus power, current draw and protection envelope Supply is a 18 to 55.2 VDC bus on a single-phase input topology — the drive runs off a DC source (typical of the Lexium integrated line) and pulls 5500 mA maximum continuous with 7000 mA peak. At 7000 mA peak the upstream 24 V or 48 V supply needs to hold the bus above the undervoltage floor under load step; derating starts above 1000 m altitude and the ambient window is bounded by 15 to 85 % non-condensing humidity. Built-in protection covers safe torque off, output short circuit, and output overload — STO is wired on the industrial connector alongside four configurable signal lines that each serve as input or output. Cooling is natural convection only, so the 66 mm flange and surrounding enclosure volume carry the thermal budget; do not blanket-insulate the housing. ## Feedback, mechanical life and environmental envelope Position feedback is a BLDC encoder on the motor side of the gearbox with ±1 point accuracy — the closed loop closes at the high-speed rotor, not the reduced output, so backlash in the worm train lives between the encoder reading and the load. For an axis where the application needs to know where the output shaft actually sits, an external position sensor on the gearbox output is the way to read past the gear train. ## Lifecycle status and how the line is sourced For a procurement line that means the BOM position is supported; the practical question is supply posture, not part discontinuation. If the BOM needs to land fast, the call to make is the one that pins the bus voltage (24 V vs 48 V), the connector variant, and whether the gearbox output must be the 92:1 reduction or one of the other ratios in the ILE family before the order is placed.","metaTitle":"Schneider ILE2P661PC1A7 Lexium Integrated Drive, 24/48 VDC","metaDescription":"Schneider Electric ILE2P661PC1A7 Lexium integrated drive: brushless DC motor with worm gearbox, 9.2 N.m nominal torque, 24/48 VDC bus.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"Phase":"Single phase","title":"ILE2P661PC1A7","Length":"9.02 in (229 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Shaft end":"Hole","Standards":"EN/IEC 50178 EN/IEC 61800-3 IEC 61800-3, Ed 2 EN 50347 EN 61800-3 : 2001-02 EN 61800-3:2001, second environment IEC 60072-1","Motor Type":"Brushless DC motor","description":"brushless dc motor 24..48 V - Ethernet Powerlink interface - L = 174 mm - 92:1","Network type":"DC","Second shaft":"Without second shaft end","Winding type":"Medium speed of rotation and medium torque","Detent torque":"108.9 lbf.in (12.3 N.m)","Feedback type":"BLDC encoder","Gear box type":"Worm gear, 3 stages","Holding brake":"Without","Nominal speed":"44 rpm 24 V 44 rpm 48 V","Rotor inertia":"1270 kg.cm²","Accuracy error":"+/- 1 point","Nominal torque":"81.4 lbf.in (9.2 N.m) 24 V 81.4 lbf.in (9.2 N.m) 48 V","Protection Type":"Safe torque off Short circuit of the output voltage Overload of output voltage","Reduction ratio":"92:1 (735:5)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILE","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.6 in (66 mm)","Peak stall torque":"175.07 lbf.in (19.78 N.m) 24 V 175.07 lbf.in (19.78 N.m) 48 V","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7000 mA peak 5500 mA maximum continuous","Nominal output power":"41 W 24 V 42 W 48 V","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"9000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"80 N","Maximum supply current":"0.1 A power stage disabled) 6.8 A 24 V 2.6 A 48 V","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"102.7 lbf.in (11.6 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"200 N","Mounting holes diameter":"0.2 in (4.4 mm)","Centring collar diameter":"1.4 in (36 mm)","Maximum mechanical speed":"54 rpm","Number of mounting holes":"2","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"12 points/turn motor 0.33° gearbox output","[Us] rated supply voltage":"48 V 24 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e4dc54459237d0acd301aba503ce6e0a.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILE2P661PC1A7/brushless-dc-motor-24-48-v-ethernet-powerlink-interface-l-174-mm-921/"},"ai":{"faq":[{"question":"What is the ILE2P661PC1A7's phase and length on this servo line?","answer":"The ILE2P661PC1A7 is listed as single-phase on a DC network, with an overall length of 9.02 in (229 mm) on a 66 mm flange. The single-phase/DC labelling reflects the integrated drive bus, not a mains input — the unit is fed from a 24 V or 48 VDC source."},{"question":"Is the ILE2P661PC1A7 available via RFQ confirmation and what is the lead time?","answer":"Submitting the quantity, bus voltage (24 V or 48 V) and connector variant with the RFQ is what pins the delivery slot."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILE2P661PC1A7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILE2P661PC1A7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}