{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILE2P662PC1A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILE2P662PC1A0","canonicalUrl":"https://aoctrl.com/schneider/ILE2P662PC1A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILE2P662PC1A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium ILE integrated drive, brushless DC servo, single-phase DC bus, 0.5 N·m nominal torque, 24/48 VDC, 66 mm flange, part number ILE2P662PC1A0.","salesMarkdown":"## Speed-torque envelope on 24 V versus 48 V bus The ILE2P662PC1A0 is a brushless DC servo from the Lexium integrated drive line (device short name ILE), and the speed-torque envelope changes meaningfully with the DC bus you feed it: nominal torque is 0.5 N·m at both 24 V and 48 V, but nominal speed is 3100 rpm on 24 V and 5000 rpm on 48 V, with peak stall torque reaching 0.8 N·m at either rail — so the choice of 24 V versus 48 V is a speed decision, not a torque decision. Continuous output power scales with that same bus choice: 162 W at 24 V versus 262 W at 48 V, so a panel wired for 48 V delivers the same torque at roughly 1.6× the mechanical power before current limits kick in. ## Current draw, protection, and what the integrated drive actually does This is a DC-bus integrated drive (network type DC, single-phase supply), not a mains-fed VFD — the drive electronics sit on the motor, so peak current consumption is 7000 mA and maximum continuous is 5500 mA, and the integrated protection covers safe torque off, output short circuit, and output overload, meaning the STO input is built in rather than added by an external safety relay. The motor flange is 66 mm (2.6 in) with a 25 mm shaft at 8 mm diameter, untaped and without a second shaft end or holding brake — a flange-mount package aimed at compact motion axes where the brake and gearbox are handled separately, if needed. Winding is the medium-speed / medium-torque variant; feedback is a BLDC encoder with ±0.5° accuracy and 0.106 N·m detent torque — the encoder is integral, so position control closes on the motor body without an external feedback cable run. ## Wiring, I/O, and field-side connections The drive exposes 4 signals, each usable as either input or output, over an industrial connector with a 100 Mbit transmission rate — modest I/O count for a small axis, with fieldbus handled on that same connector rather than a separate port block. Mechanical mounting is flange-style with a 2 mm centring collar, and the unit cools by natural convection — no fan, no forced-air clearance budget, which matters in a sealed cabinet where a 24 VDC bus is already being switched at the head end. The unit is rated for 150 m/s² shock (1000 shocks) and 20 m/s² vibration over 10–500 Hz per EN/IEC 60068-2-6/29, operating up to 1000 m altitude without derating and 15–85 % non-condensing humidity — values consistent with a panel-mounted axis on a moving machine rather than a fixed outdoor site. ## Compliance and what the standards list actually covers The standards line on this part covers EN 61800-3:2001 (EMC for power drive systems, second environment), EN 50347 (small-power motors, standardised dimensions), IEC 60072-1 (motor frame designation), and EN/IEC 50178 (power electronic equipment for power installations), with CE marking — together this is a drive-class EMC profile plus industrial-frame motor compliance, not an ATEX or food-grade certification.","metaTitle":"Schneider ILE2P662PC1A0 Lexium integrated drive, 0.5 N·m","metaDescription":"Schneider Electric ILE2P662PC1A0 Lexium integrated brushless DC servo drive, 0.5 N·m nominal, 24/48 VDC, quoted to order against the BOM. CE marked.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors"],"specifications":{"Phase":"Single phase","Length":"5.5 in (140 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Shaft end":"Untapped","Standards":"EN 61800-3 : 2001-02 EN 50347 IEC 60072-1 EN/IEC 50178 EN 61800-3:2001, second environment IEC 61800-3, Ed 2 EN/IEC 61800-3","Motor Type":"Brushless DC motor","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.0 in (25 mm)","Winding type":"Medium speed of rotation and medium torque","Detent torque":"0.938 lbf.in (0.106 N.m)","Feedback type":"BLDC encoder","Gear box type":"Without","Holding brake":"Without","Nominal speed":"3100 rpm 24 V 5000 rpm 48 V","Rotor inertia":"0.34 kg.cm²","Accuracy error":"+/- 0.5 °","Nominal torque":"4.4 lbf.in (0.5 N.m) 24 V 4.4 lbf.in (0.5 N.m) 48 V","Shaft diameter":"0.3 in (8 mm)","Protection Type":"Safe torque off Short circuit of the output voltage Overload of output voltage","Reduction ratio":"1:1","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILE","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.6 in (66 mm)","Peak stall torque":"7.08 lbf.in (0.8 N.m) 24 V 7.08 lbf.in (0.8 N.m) 48 V","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7000 mA peak 5500 mA maximum continuous","Nominal output power":"162 W 24 V 262 W 48 V","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"30 N force pressure) 30 N tensile force)","Maximum supply current":"0.1 A power stage disabled) 7 A 48 V 9.5 A 24 V","Number of motor stacks":"2","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"4.78 lbf.in (0.54 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"80 N","Mounting holes diameter":"0.2 in (4.4 mm)","Centring collar diameter":"1.6 in (40 mm)","Maximum mechanical speed":"5000 rpm 7000 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"12 points/turn","[Us] rated supply voltage":"48 V 24 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.90 in (73.54 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9c63f724a992a9cb9f2c68bd64a3686d.pdf","sourceUrl":"https://www.se.com/vn/en/product/ILE2P662PC1A0/brushless-dc-motor-24-48-v-ethernet-powerlink-interface-l-140-mm-/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILE2P662PC1A0/alternatives.json"},"ai":{"faq":[{"question":"What is the listed phase on the ILE2P662PC1A0?","answer":"The phase field on this part is single phase, with network type DC — meaning the drive is fed from a DC bus, not from mains AC, even though the supply-side wiring path is single-phase in topology."},{"question":"What is the listed length of the ILE2P662PC1A0?","answer":"The motor length is 5.5 in (140 mm), with a 66 mm (2.6 in) flange — useful when laying out the axis envelope against adjacent hardware in the cabinet."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILE2P662PC1A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILE2P662PC1A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}