{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILE2T661PC1A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILE2T661PC1A0","canonicalUrl":"https://aoctrl.com/schneider/ILE2T661PC1A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILE2T661PC1A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium ILE integrated drive, brushless DC motor, 66 mm flange, single-phase, 24/48 V DC, 0.26 N·m nominal torque.","salesMarkdown":"## What the ILE2T661PC1A0 is — and where it sits on a machine The ILE2T661PC1A0 is a Schneider Electric Lexium ILE integrated drive — a brushless DC motor with the servo amplifier built into the same housing, sized to a 66 mm flange footprint and terminated through an industrial connector rather than a hard-wired pigtail. The combination collapses the traditional motor-plus-separate-drive architecture into a single 4.8 in (122 mm) long unit that bolts onto the machine frame. ## Speed, torque, and the 24 V vs 48 V decision Nominal speed is 4800 rpm at 24 V and 6000 rpm at 48 V, with a nominal torque of 0.26 N·m at either bus voltage — meaning the higher bus delivers speed headroom while torque output stays flat, so 48 V is the right choice when the cycle demands faster moves, and 24 V is the right choice when the bus is shared with other 24 VDC loads on the machine. Peak stall torque is 0.43 N·m and the drive will pull up to 7 A peak / 5.5 A maximum continuous, so sizing the upstream 24 V or 48 V supply must be done on the peak figure, not the continuous — a supply that can comfortably source 5.5 A continuous will still sag under the 7 A transient unless it is sized with that headroom in mind. Continuous mechanical output is 131 W at 24 V and 163 W at 48 V, which lines up with the medium-speed, medium-torque winding class — a useful match for conveyors, indexing tables, and small-format pick-and-place axes where high dynamic torque matters less than smooth speed across the working range. ## Mechanical envelope — flange, shaft, no gearbox, no brake The drive bolts on through a 66 mm flange with a 2 mm centring collar and an 8 mm untapped shaft 25 mm long, so any coupling or pulley fitted to the shaft must be clamped or bonded — there is no thread to take a set screw, and the spec sheet explicitly lists the shaft end as untapped. No holding brake, no second shaft end, no integrated gearbox — the ILE2T661PC1A0 is a 1:1 BLDC drive, and any external reduction, holding, or back-stopping has to be designed in at the machine level. ## Protective functions, feedback, and standards compliance Protection covers overload of output voltage, short circuit of the output voltage, and safe torque off (STO) — the STO function in particular matters for any application where the integrated drive sits inside a guarded hazard zone, because it removes motor torque without removing bus power, a pattern aligned with EN 61800-3:2001 second-environment EMC and IEC 61800-3 EMC for adjustable-speed drives. Feedback is a BLDC encoder with ±0.5° accuracy, which is more than adequate for point-to-point positioning at the 4800–6000 rpm range but would be the limiting factor on any axis requiring sub-degree repeatability on a multi-turn index. Cooling is by natural convection only — there is no fan, no blower, and no liquid path, so the drive must be mounted with adequate clearance around the housing or the 5.5 A continuous current figure will derate in a sealed enclosure. ## I/O, comms, and the four signal lines Four signals are available, each usable as either an input or an output, and comms run at 10/100 Mbit/s — enough for the typical point-to-point or small-network motion cell where the ILE is wired back to a PLC or small motion controller. ## Environment and mounting limits The unit is rated to 20 m/s² vibration across 10–500 Hz over 10 cycles per IEC 60068-2-6, and 150 m/s² shock across 1000 shocks per IEC 60068-2-29 — sufficient for most panel-side and light-machine-frame installations, with operating altitude limited to 1000 m without derating and relative humidity held between 15% and 85% non-condensing. ## Sourcing posture for the ILE2T661PC1A0 The ILE2T661PC1A0 sits in the Lexium integrated drive family with recorded as current, and there is no official successor or cross-reference on the record — for production BOMs the right move is to specify it against the BOM quantity with the Lexium line still active, and have the RFQ confirm pricing and lead time at quote time rather than relying on a published stock figure.","metaTitle":"Schneider Electric ILE2T661PC1A0 Lexium integrated drive","metaDescription":"Schneider ILE2T661PC1A0 Lexium integrated BLDC drive, 66 mm flange, 0.26 N·m nominal, 4800 rpm at 24 V / 6000 rpm at 48 V. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"Phase":"Single phase","title":"ILE2T661PC1A0","Length":"4.8 in (122 mm)","Marking":"CE","Category":"US1PC5618288","Shaft end":"Untapped","Standards":"EN 61800-3:2001, second environment IEC 50178 IEC 60072-1 IEC 61800-3 IEC 61800-3, Ed 2 IEC 50347 EN 61800-3 : 2001-02","Motor Type":"Brushless DC motor","description":"brushless DC motor, Lexium ILA ILE ILS, 24 to 48V, Modbus TCP interface, industrial connector, 122mm, without gearbox","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.0 in (25 mm)","Winding type":"Medium speed of rotation and medium torque","Detent torque":"0.71 lbf.in (0.08 N.m)","Feedback type":"BLDC encoder","Gear box type":"Without","Holding brake":"Without","Nominal speed":"4800 rpm 24 V 6000 rpm 48 V","Rotor inertia":"0.17 kg.cm²","Accuracy error":"+/- 0.5 °","Nominal torque":"2.30 lbf.in (0.26 N.m) 24 V 2.30 lbf.in (0.26 N.m) 48 V","Shaft diameter":"0.3 in (8 mm)","Protection Type":"Overload of output voltage Safe torque off Short circuit of the output voltage","Reduction ratio":"1:1","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks IEC 60068-2-29","Device short name":"ILE","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.6 in (66 mm)","Peak stall torque":"3.81 lbf.in (0.43 N.m) 24 V 3.81 lbf.in (0.43 N.m) 48 V","Relative humidity":"15...85 % without condensation","Transmission Rate":"10, 100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7000 mA peak 5500 mA maximum continuous","Nominal output power":"131 W 24 V 163 W 48 V","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"30 N force pressure) 30 N tensile force)","Maximum supply current":"0.1 A power stage disabled) 6.8 A 24 V 3.8 A 48 V","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Modbus TCP, Integrated","Continuous stall torque":"2.48 lbf.in (0.28 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"80 N","Mounting holes diameter":"0.2 in (4.4 mm)","Centring collar diameter":"1.6 in (40 mm)","Maximum mechanical speed":"6500 rpm 7000 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"12 points/turn","[Us] rated supply voltage":"24 V 48 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.90 in (73.54 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/15ec01a1673193fd53fbb3557de5071d.pdf","sourceUrl":"https://www.se.com/vn/en/product/ILE2T661PC1A0/brushless-dc-motor-lexium-ila-ile-ils-24-to-48v-modbus-tcp-interface-industrial-connector-122mm-without-gearbox/"},"ai":{"faq":[{"question":"What supply voltage and current envelope does the ILE2T661PC1A0 need?","answer":"The drive runs on a DC bus at 24 V or 48 V, draws up to 7 A peak and 5.5 A maximum continuous, and delivers 4800 rpm at 24 V or 6000 rpm at 48 V at a nominal 0.26 N·m — so the upstream supply must be sized for the 7 A peak transient, not just the 5.5 A continuous figure."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILE2T661PC1A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILE2T661PC1A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}