{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0701P02A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0701P02A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0701P02A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0701P02A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric, PacDrive 3 series, ILM family servo motor integrated drive, 0.5 N·m nominal torque, 3.5 N·m peak, 6000 rpm, IP54, Hiperface absolute multiturn feedback.","salesMarkdown":"## Where the ILM0701P02A0000 sits in the PacDrive 3 stack The ILM0701P02A0000 is a servo motor integrated drive in the ILM family of the PacDrive 3 range, with a 70 mm flange and 212 mm body length that puts it in the compact end of the line — sized for machines where the move profile demands fast acceleration more than high continuous torque. It pairs with a PacDrive 3 controller over the Hiperface absolute multiturn SinCos feedback link, so the drive resolves position from 128 periods per turn without a homing routine on every power-up. ## Torque and speed envelope — what the motor actually delivers Peak stall torque of 3.5 N·m and a maximum Irms of 5.7 A set the acceleration ceiling; the 310 W nominal output power and 6-pole, single-stack construction show this is a high-acceleration / low-continuous-duty axis, not a direct-drive replacement for a gearmotor. Torque constant is 0.71 N·m/A at 120 °C and the back-EMF constant is 46 V/krpm at 20 °C — the two scale together, so a drive sized for the nominal current also sees a bus-regen voltage that stays inside a 600 V-class DC link at top speed. ## Electrical constants — sizing the drive loop Stator resistance is 10.4 Ω phase-to-phase at 20 °C, dropping to 7.23 Ω phase-to-neutral at 120 °C; stator inductance is 38.8 mH at 20 °C and 19.4 mH at 120 °C, both phase-to-neutral — the inductance halving with temperature is the figure the current loop bandwidth calculation actually wants, not the cold number. ## Shaft, flange, and mounting — what fits where The shaft is 11 mm diameter, 23 mm long, untapped, with an 18 mm keyway and no second shaft end — the gearbox or pinion mounts directly on the keyed stub, with no threads to chase for a retention screw. Flange mounting is the international standard pattern on a 70 mm flange with a 60 mm centring collar and four 5.5 mm mounting holes; maximum radial load is 660 N at 1000 rpm, falling on a published curve to 360 N at 6000 rpm, with maximum axial force capped at 0.2 × Fr — so the belt tension or pinion mesh force needs to be checked against the speed-dependent Fr table, not against the headline number. Cooling is natural convection and sealing is IP54 — meaning the body tolerates dust and splashing water but not washdown, so it mounts inside a cabinet or on a covered machine section rather than in an open food-and-bev cell. No holding brake is fitted, so any vertical axis needs a brake added at the gearbox or as a separate option; the motor ships one per carton.","metaTitle":"Schneider Electric ILM0701P02A0000 Servo Motor, 0.5 N·m","metaDescription":"Schneider Electric ILM0701P02A0000 PacDrive 3 ILM servo motor, 0.5 N·m nominal / 3.5 N·m peak, 6000 rpm, IP54, Hiperface feedback. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM0701P02A0000","Length":"8.3 in (212 mm)","Category":"US1PC5218351","Key width":"0.7 in (18 mm)","Shaft end":"Untapped","description":"ILM integrated drive, 70mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"6000 rpm","Rotor inertia":"0.25 kg.cm²","Nominal torque":"4.4 lbf.in (0.5 N.m)","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.71 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m)","Stator inductance":"38.8 mH 68 °F (20 °C) Ph/Ph 19.4 mH 248 °F (120 °C) Ph/N","Stator resistance":"10.4 Ohm 68 °F (20 °C) Ph/Ph 7.23 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"0.6 A","Maximum current Irms":"5.7 A","Nominal Output Power":"310 W","Centring collar depth":"0.10 in (2.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"6","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"9.7 lbf.in (1.1 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.55 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fea8554a45d32291c5cec050e3951925.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM0701P02A0000/ilm-integrated-drive-70mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake/"},"ai":{"faq":[{"question":"What is the ILM0701P02A0000's listed length on the Servo Drives line?","answer":"8.3 in (212 mm) body length on a 70 mm flange, four-hole international standard flange mount, 60 mm centring collar — the compact footprint that places it at the small end of the PacDrive 3 ILM family."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0701P02A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0701P02A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}