{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0701P21F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0701P21F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0701P21F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0701P21F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric, PacDrive 3, ILM series, servo motor integrated drive, order code ILM0701P21F0000, 70 mm flange, 310 W nominal, IP65, Hiperface SinCos single-turn feedback, with holding brake.","salesMarkdown":"## What this motor is, in one paragraph The ILM0701P21F0000 is a Schneider Electric PacDrive 3 ILM servo motor with an integrated drive stage, listed as a 70 mm flange unit with a single motor stack and a 6-pole rotor built around an absolute single-turn SinCos Hiperface feedback device. It ships with a holding brake and a plain untapped shaft with no second shaft end, so the only mechanical interface to design around is the brake-equipped output side. ## Torque, speed, and the load it can actually move Continuous torque is rated at 0.5 N.m nominal with a continuous stall torque of 1.1 N.m, while the peak stall ceiling sits at 3.5 N.m and the holding brake delivers 3 N.m of static retention — meaning the drive has roughly a 7× peak-to-nominal torque margin for short acceleration events before the brake becomes the limiting static load. Nominal output power is 310 W at a 6000 rpm nominal speed, with a torque constant of 0.71 N.m/A referenced to a 248 °F (120 °C) thermal point and a back-EMF constant of 46 V/krpm at 68 °F (20 °C), so sizing the PacDrive 3 amplifier around the 1.55 A continuous stall current and 5.7 A Irms peak gives a comfortable margin on the windings. Stator resistance is 10.4 Ohm phase-to-phase at 20 °C (7.23 Ohm phase-to-neutral at 120 °C) and stator inductance 38.8 mH phase-to-phase at 20 °C, the values a commissioning engineer needs to confirm current-loop bandwidth and short-circuit protection behaviour at the drive output. ## Mechanical envelope, shaft loads, and panel-side fit Overall length is 8.6 in (219 mm) on a 2.8 in (70 mm) flange with a 0.4 in (11 mm) shaft of 0.9 in (23 mm) usable length, an 0.7 in (18 mm) key, and four 0.2 in (5.5 mm) mounting holes on a 60 mm centring collar — a footprint that drops directly onto the standard PacDrive 3 ILM machine-builder baseplate pattern. Maximum radial load Fr is derated from 660 N at 1000 rpm down to 360 N at the 6000 rpm nominal speed, and axial load Fa is constrained to 0.2 × Fr, which sets the belt or coupling preload budget when the motor is mounted away from the gearbox.","metaTitle":"Schneider Electric ILM0701P21F0000 PacDrive 3 servo motor","metaDescription":"Schneider Electric ILM0701P21F0000 PacDrive 3 ILM integrated servo motor, 70 mm flange, 310 W, IP65, Hiperface feedback.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Length":"8.6 in (219 mm)","IP Rating":"IP65","Product Status":"Active","Shaft Diameter":"0.4 in (11 mm)","Shaft End Type":"Untapped","Max Axial Force Fa N":"0.2 x Fr","Max Radial Force Fr N":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Centring Collar Diameter":"2.4 in (60 mm)","Main Product Or Component Type":"Servo motor integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/86c6ed9b36b51c7942fa60bcc1443a40.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM0701P21F0000/ilm-integrated-drive-70mm-1-stack-smooth-shaft-ip65-sincos-singleturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM0701P21F0000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0701P21F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0701P21F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}