{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0701P22F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0701P22F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0701P22F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0701P22F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric ILM0701P22F0000 PacDrive 3 ILM integrated-drive servo motor, 310 W nominal, IP65, Hiperface multiturn feedback, 70 mm flange.","salesMarkdown":"## Definition and class The Schneider Electric ILM0701P22F0000 is a servo motor with integrated drive from the PacDrive 3 ILM range, device short name ILM. That pairing collapses the drive electronics into the motor housing, so the unit drops onto a standard 70 mm international flange without a separate cabinet-mounted amplifier — the cable run to the controller is the fieldbus, not a resolver or encoder loop terminated at a remote drive. ## 310 W continuous, 5.7 A peak Nominal output power is 310 W at a line-rated continuous current of 0.6 A, with a maximum Irms of 5.7 A and a continuous stall current of 1.55 A. The peak-to-continuous ratio is what matters for sizing: the drive can deliver roughly 9.5× the nominal current briefly, so a high-acceleration motion profile (fast index + dwell) fits inside the thermal envelope that the 0.6 A figure implies for steady-state. ## Torque and speed envelope Nominal speed is 6000 rpm. The 7× peak-to-nominal torque ratio is the budget the application programmer leans on for accel/decel pulses between dwells — the holding brake then locks the axis at zero speed without back-driving the motor. ## Hiperface feedback and motor constants Position feedback is absolute multiturn SinCos Hiperface, which means the controller reads absolute shaft position on power-up without a homing routine. Stator resistance is 10.4 Ω phase-to-phase at 20 °C and inductance is 38.8 mH phase-to-phase at 20 °C, with a back-EMF constant of 46 V/krpm and a torque constant of 0.71 N·m/A at 120 °C. The torque constant figure being specified at the hot winding temperature — not 25 °C — is the useful one for sizing loop bandwidth; the cold-winding number overstates the torque a warmed-up motor delivers at the same current. ## 70 mm flange, IP65, natural convection The motor flange size is 70 mm, mounting support is the international standard flange pattern with a 60 mm centring collar and 5.5 mm mounting holes on a 4-hole pattern. Shaft is 11 mm diameter × 23 mm long, untapped, with no second shaft end. Cooling is natural convection — there is no integrated fan — and the housing carries IP65 protection. IP65 plus convection-only cooling is the deployment gate: the unit goes inside an enclosure or onto a machine surface where splash and dust ingress are the hazards, but the absence of forced cooling caps continuous torque in a still-air environment well below the 1.1 N·m stall figure. ## Lifecycle posture Lifecycle stage is recorded as current for this order code.","metaTitle":"Schneider ILM0701P22F0000 servo motor, 310 W, IP65","metaDescription":"Schneider Electric ILM0701P22F0000 PacDrive 3 ILM integrated-drive servo motor, 310 W output, IP65, Hiperface feedback. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"Length":"8.6 in (219 mm)","Category":"US1PC5218351","Key width":"0.7 in (18 mm)","Shaft end":"Untapped","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"6000 rpm","Rotor inertia":"0.35 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"4.4 lbf.in (0.5 N.m)","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.71 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m)","Stator inductance":"38.8 mH 68 °F (20 °C) Ph/Ph 19.4 mH 248 °F (120 °C) Ph/N","Stator resistance":"10.4 Ohm 68 °F (20 °C) Ph/Ph 7.23 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"0.6 A","Maximum current Irms":"5.7 A","Nominal Output Power":"310 W","Centring collar depth":"0.10 in (2.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"6","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"9.7 lbf.in (1.1 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.55 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b95fc2d63fb16b78392dade19899203c.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM0701P22F0000/ilm-integrated-drive-70mm-1-stack-smooth-shaft-ip65-sincos-multiturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM0701P22F0000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy ILM0701P22F0000 and how do I get a price?","answer":"No live stock count or lead-time number is asserted on this page."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0701P22F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0701P22F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}