{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0701P31F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0701P31F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0701P31F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0701P31F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor, integrated drive, 310 W, 0.5 N·m nominal / 3.5 N·m peak stall, 6000 rpm, Hiperface feedback, holding brake, IP65, keyed shaft, ILM0701P31F0000.","salesMarkdown":"The ILM0701P31F0000: It is a member of the PacDrive 3 range and carries the ILM device short name, which is Schneider's integrated-drive servo family: the drive electronics are bundled into the motor housing itself rather than sitting in a separate cabinet amplifier, so the field-replacement unit is one assembly rather than a motor/drive pair. ## Torque and speed envelope for sizing the axis Continuous stall torque is 1.1 N·m and nominal torque is 0.5 N·m at the 6000 rpm ceiling, with peak stall reaching 3.5 N·m for acceleration transients — a small-frame servo sized for light packaging, indexing tables, or auxiliary axes where the motion is short-stroke but dynamic. Peak torque capability is supported by a maximum current Irms of 5.7 A against a continuous stall current of 1.55 A, so the axis can be commanded at roughly 3.7× its continuous rating for short bursts before thermal limits kick in — a ratio to budget into any fast-accel/decel profile. The integrated holding brake delivers 3 N·m of static holding torque, which is above the motor's continuous torque rating; the brake holds the axis at standstill with the drive unpowered rather than serving as a dynamic stopping element. ## Feedback, windings, and the drive-side signature Position feedback is an absolute single-turn SinCos Hiperface encoder, so the drive knows absolute shaft angle on power-up without a homing move — useful on machines where the reference position must survive a power cycle without re-seek. The torque constant of 0.71 N·m/A at 120 °C winding temperature sets the current-to-torque gain the drive has to model for thermal compensation; back-EMF constant of 46 V/krpm at 20 °C limits the safe no-load top speed at any given DC-bus voltage the PacDrive amplifier supplies. ## Mechanical fit — flange, shaft, and shaft loads The motor uses an international-standard 70 mm flange with a 60 mm centring collar and four 5.5 mm mounting holes; the keyed shaft is 11 mm in diameter by 23 mm long with an 18 mm key — a compact footprint that drops into standard NEMA/IEC 70 mm servo mounting patterns. Shaft load ratings are 660 N radial at 1000 rpm, derating down to 360 N at 6000 rpm, and axial force capped at 0.2× the applied radial value — these are the mechanical limits that drive the choice of coupling, the permissible overhung load from a gearbox or pinion, and the thrust budget for any screw or belt preload. There is no second shaft end, so a manual override handwheel or auxiliary encoder cannot be mounted on the rear — any service access has to be planned at the front shaft or by decoupling the driven element. ## Environment and thermal path IP65 sealing on the motor housing means the unit tolerates dust and low-pressure water jets — a washdown-adjacent duty where the cabling gland is the sealing point rather than the housing face, and the motor can be panel-mounted near coolant splash zones that a standard IP54 servo would not survive. Cooling is by natural convection only — there is no integrated fan, so the axis must be mounted with clearance around the body and derated if it is enclosed in a sealed cabinet without forced airflow, since the integrated drive electronics add to the heat the fins have to shed.","metaTitle":"Schneider Electric ILM0701P31F0000 Servo Motor, 310 W, IP65","metaDescription":"Schneider Electric ILM0701P31F0000 PacDrive 3 ILM servo motor, 0.5 N·m nominal / 3.5 N·m peak, 6000 rpm, IP65. Active production, quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM0701P31F0000","Length":"8.6 in (219 mm)","Category":"US1PC5218351","Key width":"0.7 in (18 mm)","Shaft end":"Keyed","description":"ILM integrated drive, 70mm, 1 stack, keyed Shaft, IP65, SinCos Singleturn 128, Brake","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"6000 rpm","Rotor inertia":"0.35 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"4.4 lbf.in (0.5 N.m)","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.71 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m)","Stator inductance":"38.8 mH 68 °F (20 °C) Ph/Ph 19.4 mH 248 °F (120 °C) Ph/N","Stator resistance":"10.4 Ohm 68 °F (20 °C) Ph/Ph 7.23 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"0.6 A","Maximum current Irms":"5.7 A","Nominal Output Power":"310 W","Centring collar depth":"0.10 in (2.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"6","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"9.7 lbf.in (1.1 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.55 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8a3bc047698cdcf51322632c239234a2.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM0701P31F0000/ilm-integrated-drive-70mm-1-stack-keyed-shaft-ip65-sincos-singleturn-128-brake/"},"ai":{"faq":[{"question":"What does the Hiperface feedback and holding brake combination do for this motor?","answer":"Hiperface SinCos absolute single-turn feedback gives absolute shaft position on power-up without a homing move, and the 3 N·m holding brake holds the axis at standstill when the drive is unpowered — together they let the machine restart in a known state after an E-stop or power loss without re-seeking the reference."},{"question":"Where can ILM0701P31F0000 be sourced for a contract build with a customer AVL?","answer":"ILM0701P31F0000 is sourced through independent distribution against an RFQ — a Schneider Electric PacDrive 3 ILM motor supplied per the BOM. Because the customer's AVL governs whether a third-party channel is acceptable, flag this as a deviation request before placing the order if Schneider Electric direct or an authorised channel is mandated."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0701P31F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0701P31F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}