{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0701P32A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0701P32A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0701P32A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0701P32A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor integrated drive, 310 W, 0.5 N·m nominal torque, 6000 rpm, IP65, keyed shaft.","salesMarkdown":"The ILM0701P32A0000 is a Schneider Electric servo motor with integrated drive from the PacDrive 3 family, sized at a 70 mm flange (2.8 in) for compact motion axes where a separate drive cabinet is undesirable. It pairs a 310 W continuous output section with a SinCos Hiperface absolute multiturn feedback on 128 periods, so the drive electronics read absolute position straight from power-on — no homing return on every restart. ## Torque, speed, and the way the curve actually behaves Continuous stall torque is 1.1 N·m (9.7 lbf.in) drawing 1.55 A of stall current; nominal operating point is 0.5 N·m (4.4 lbf.in) at up to 6000 rpm. Peak stall reaches 3.5 N·m (31.0 lbf.in) for acceleration pulses, with a maximum Irms of 5.7 A — so the drive must be sized to deliver that intermittent peak, not just the continuous figure, on any axis that demands fast ramps. The torque constant of 0.71 N·m/A at 120 °C and a back-EMF constant of 46 V/krpm at 20 °C give the drive engineer the gain terms needed to close the current loop; stator resistance climbs from 7.23 Ω Ph/N at 120 °C up to 10.4 Ω Ph/Ph at 20 °C, and inductance shifts from 19.4 mH Ph/N to 38.8 mH Ph/Ph across the same span — thermal compensation in the drive's autotune is what keeps those numbers honest. ## Mechanical fit and shaft loading at the load side Body length is 212 mm (8.3 in) with a 70 mm international standard flange and a centred 60 mm collar 2.5 mm deep; four M5-equivalent mounting holes on the standard flange pattern mean the motor drops onto existing ILM70 footprints without a bracket redesign. The output shaft is 11 mm diameter, 23 mm long, keyed 18 mm wide, with no second shaft end and no holding brake — the keyed shaft accepts a standard hub, and the absence of a brake means the axis must be held by the load or a separately mounted brake if vertical, gravity-loaded motion is in play. Maximum radial load Fr drops from 660 N at 1000 rpm to 360 N at 6000 rpm, and maximum axial Fa is capped at 0.2 × Fr — the closer the coupling sits to the shaft shoulder and the smaller the overhung load, the more headroom is left before bearing life becomes the design constraint. ## Environment, cooling, and feedback resolution Cooling is by natural convection — no integrated fan — which keeps the acoustic signature clean but caps continuous output at the 310 W figure; an enclosure that traps heat around the body derates that rating and the 1.1 N·m continuous stall torque with it. The IP65 sealing covers the body against dust and low-pressure water jets, so the motor survives washdown-adjacent cells and food-line splash zones when mounted with the shaft sealing accessory, but it is not rated for high-pressure cleaning or full submersion.","metaTitle":"Schneider ILM0701P32A0000 Servo Motor, 310 W, PacDrive 3","metaDescription":"Schneider Electric ILM0701P32A0000 PacDrive 3 integrated servo motor, 310 W output, 0.5 N·m nominal torque, 6000 rpm, IP65, quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM0701P32A0000","Length":"8.3 in (212 mm)","Category":"US1PC5218351","Key width":"0.7 in (18 mm)","Shaft end":"Keyed","description":"ILM integrated drive, 70mm, 1 stack, keyed Shaft, IP65, SinCos Multiturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"6000 rpm","Rotor inertia":"0.25 kg.cm²","Nominal torque":"4.4 lbf.in (0.5 N.m)","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.71 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m)","Stator inductance":"38.8 mH 68 °F (20 °C) Ph/Ph 19.4 mH 248 °F (120 °C) Ph/N","Stator resistance":"10.4 Ohm 68 °F (20 °C) Ph/Ph 7.23 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"0.6 A","Maximum current Irms":"5.7 A","Nominal Output Power":"310 W","Centring collar depth":"0.10 in (2.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"6","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"9.7 lbf.in (1.1 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.55 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9aa61261387ef9fcff9340cc31b355ed.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM0701P32A0000/ilm-integrated-drive-70mm-1-stack-keyed-shaft-ip65-sincos-multiturn-128-no-brake/"},"ai":{"faq":[{"question":"What are the key ratings I need to confirm against my BOM?","answer":"The headline figures for ILM0701P32A0000 are 310 W nominal output, 0.5 N·m nominal torque at up to 6000 rpm, 1.1 N·m continuous stall torque, and a 3.5 N·m peak — match those against the cycle's continuous and acceleration demands before specifying the drive rating that surrounds it."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0701P32A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0701P32A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}