{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0702P01A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0702P01A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0702P01A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0702P01A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor integrated drive, 720 W nominal output, 6000 rpm nominal speed, 1.15 N·m nominal torque, Hiperface SinCos single-turn feedback, IP54, international standard flange.","salesMarkdown":"## PacDrive 3 ILM, 720 W integrated servo motor The ILM0702P01A0000 is a Schneider Electric PacDrive 3 series integrated servo motor — the drive electronics sit on the back of the 70 mm flange, so the unit replaces a separate motor-and-drive pair on the machine and shortens the panel-to-machine cable run. Continuous rating is 720 W output at 6000 rpm nominal, with 1.15 N·m nominal torque and 1.5 A line-rated current — the spec pair that decides the matching drive sizing and the heat-soak budget in a sealed cabinet. ## Torque envelope — nominal, continuous stall, peak Three torque points define the working window: 1.15 N·m nominal, 1.7 N·m continuous stall, and 7.6 N·m peak stall — the 6.6:1 peak-to-nominal ratio is the acceleration headroom available during index moves before the I²t trip engages, and it is the figure that matters more than the nominal for short-stroke packaging and pick-and-place sizing. Continuous stall draws 2.5 A and the maximum Irms is 11.8 A — that pair sets the LXM/PacDrive controller sizing and the cable cross-section that survives the peak without nuisance I²T trips on a cold-start index. ## Feedback, cooling, and enclosure Feedback is an absolute single-turn SinCos Hiperface encoder at 128 periods per turn, so absolute position survives a power cycle — the controller comes up knowing axis position without a homing routine on every restart. Cooling is natural convection and the housing is IP54, so the motor is specified for cabinet interiors and clean industrial environments rather than washdown; the holding-brake option is not fitted on this build. ## Shaft, flange, and radial load Output shaft is 11 mm diameter × 23 mm long with an untapped end and no second shaft extension, mounted on a 70 mm international-standard flange with a 60 mm centring collar and four 5.5 mm mounting holes — that is the mating footprint a coupling or gearbox has to match. Maximum radial load Fr scales from 710 N at 1000 rpm down to 390 N at 6000 rpm, and maximum axial Fa is capped at 0.2× Fr — the belt tension or pinion load must be sized against the speed-dependent Fr curve, not a single number on the nameplate.","metaTitle":"ILM0702P01A0000 Schneider ILM Servo Motor, 720 W, 6000 rpm","metaDescription":"Schneider Electric ILM0702P01A0000 PacDrive 3 servo motor integrated drive, 720 W, 6000 rpm nominal, 1.15 N·m nominal torque. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Length":"8.9 in (226 mm)","IP Rating":"IP54","Product Status":"Active","Shaft Diameter":"0.4 in (11 mm)","Shaft End Type":"Untapped","Max Axial Force Fa N":"0.2 x Fr","Centring Collar Diameter":"2.4 in (60 mm)","Main Product Or Component Type":"Servo motor integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a634d208f5dc11ce737dac87b05979e8.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM0702P01A0000/integrated-servo-motor-1-7-nm-6000-rpm-without-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM0702P01A0000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0702P01A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0702P01A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}