{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0702P01F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0702P01F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0702P01F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0702P01F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor integrated drive, 720 W, 1.15 N.m nominal torque, 6000 rpm, IP54, SinCos Hiperface feedback, integrated holding brake, ILM0702P01F0000.","salesMarkdown":"## PacDrive 3 integrated servo motor — what the ILM0702P01F0000 actually delivers The Schneider Electric ILM0702P01F0000 is a servo motor with integrated drive from the PacDrive 3 range, with the ILM device short name and a 70 mm motor flange. It packages the amplifier and the motor in one mechanical unit, which removes the separate drive cabinet slot and the feedback cable run that a conventional servo pairing needs. Continuous output is 720 W at a nominal speed of 6000 rpm, with 1.15 N.m of nominal torque. The torque constant of 0.76 N.m/A at 120 C winding temperature sets the current demand per N.m of load torque — that figure, not the headline power, is what the drive sizing calculation actually consumes. ## Stall envelope, peak torque, and what they mean for the duty cycle Continuous stall torque is 1.7 N.m at a continuous stall current of 2.5 A, so any start-stop profile that holds torque near zero speed must stay under that envelope. Peak stall torque reaches 7.6 N.m with a maximum Irms of 11.8 A — roughly six times the nominal torque — which defines the acceleration headroom available for short moves before thermal limits close in. Back EMF is 48 V/krpm at 20 C, so the motor generates a rising counter-voltage as it speeds up. Stator resistance drops from 4.2 Ohm Ph/Ph at 20 C to 2.92 Ohm Ph/N at 120 C, and stator inductance shifts from 19 mH Ph/Ph at 20 C to 9.5 mH Ph/N at 120 C — the cold-to-hot swing that the controller's current loop has to track without losing stability. ## Feedback, brake, cooling — the parts the controls engineer has to plan around Position feedback is an absolute single-turn SinCos Hiperface device, so the controller reads absolute shaft position on power-up with no homing move. An integrated holding brake delivers 3 N.m of holding torque, giving a fail-safe stop when the servo enable is removed. Cooling is natural convection — no fan, no blower duct, but also no margin for mounting the motor in a fully enclosed pocket with stagnant air. Shaft loading is the constraint most datasheet pages bury: radial force Fr derates from 710 N at 1000 rpm to 390 N at 6000 rpm, with axial force Fa limited to 0.2 x Fr. A belt drive or a gearbox on the shaft end has to be checked against the speed-corrected Fr figure, not the static one — that is where most overhung-load failures originate on this class of motor. ## Mechanical envelope and panel-side fit The ILM0702P01F0000 mounts on an international standard flange with a 70 mm flange size, 252 mm body length, an 18 mm key width, an 11 mm shaft diameter and a 23 mm shaft length. Four 5.5 mm mounting holes and a 60 mm centring collar set the bolt pattern. IP54 means the body resists dust and splashing water, but it is not a washdown-rated enclosure — washdown lines need a higher IP on this package or a protective shroud.","metaTitle":"Schneider Electric ILM0702P01F0000 Servo Motor, 720 W","metaDescription":"Schneider PacDrive 3 ILM servo motor, 720 W nominal at 6000 rpm, 1.15 N.m nominal torque with integrated drive and holding brake. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM0702P01F0000","Length":"9.9 in (252 mm)","Category":"US1PC5218351","Key width":"0.7 in (18 mm)","Shaft end":"Untapped","description":"ILM integrated drive, 70mm, 2 stacks, smooth Shaft, SinCos Singleturn 128, Brake","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"6000 rpm","Rotor inertia":"0.51 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"10.18 lbf.in (1.15 N.m)","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.76 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m)","Stator inductance":"19 mH 68 °F (20 °C) Ph/Ph 9.5 mH 248 °F (120 °C) Ph/N","Stator resistance":"4.2 Ohm 68 °F (20 °C) Ph/Ph 2.92 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.5 A","Maximum current Irms":"11.8 A","Nominal Output Power":"720 W","Centring collar depth":"0.10 in (2.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"6","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Continuous stall torque":"15.05 lbf.in (1.7 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.5 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/35bbc7b2ef17fabb2e529cda627c61b7.pdf","sourceUrl":"https://www.se.com/be/en/product/ILM0702P01F0000/ilm-integrated-drive-70mm-2-stacks-smooth-shaft-sincos-singleturn-128-brake/"},"ai":{"faq":[{"question":"Who supplies ILM0702P01F0000 and how is it quoted for volume purchases?","answer":"Production volumes, pricing breaks, and lead time are all confirmed at the RFQ stage — there is no stock count or fixed price published on this listing. Submit the RFQ against the PacDrive 3 order code and the supply terms come back with the quote."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0702P01F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0702P01F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}