{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0702P22A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0702P22A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0702P22A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0702P22A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor integrated drive, 720 W, 1.15 N·m nominal, 6000 rpm, IP65, flange-mount, ILM0702P22A0000.","salesMarkdown":"## Form factor and what the flange gives you The Schneider Electric ILM0702P22A0000 is a servo motor integrated drive from the PacDrive 3 range, with the ILM short name — the drive electronics live inside the motor housing rather than in a separate cabinet amplifier, so the cabinet-side wiring collapses to power in, fieldbus out, and feedback to the controller. Overall length is 8.9 in (226 mm) on a 2.8 in (70 mm) flange — a short-stack frame that fits where a separate servo + amplifier pair would not, with a 60 mm centring collar and four 5.5 mm mounting holes on the international standard flange pattern. ## Torque, speed and the 720 W working envelope Continuous torque is 1.15 N·m nominal (10.18 lbf.in) with a continuous stall torque of 1.7 N·m (15.05 lbf.in), and peak stall reaches 7.6 N·m (67.3 lbf.in) — the 6.6× ratio between peak and continuous is what lets the motor accelerate inertial loads and survive short-term overload events without tripping the drive. Rated nominal speed is 6000 rpm at 720 W output power — sizing the load against this point matters more than the headline wattage, because above 6000 rpm the motor runs into field-weakening and the available torque drops. ## Shaft, bearings and the radial load ceiling The shaft is 11 mm diameter (0.4 in), 23 mm long (0.9 in), untapped, no second shaft end, no holding brake — direct-coupling or pulley-mount only, with no fail-safe parking torque if the bus drops, so the mechanical side must back-stop the axis. Maximum radial load Fr falls from 710 N at 1000 rpm to 390 N at 6000 rpm, with maximum axial force Fa capped at 0.2 × Fr — a belt or gear on the shaft end needs to be dimensioned against the speed-dependent Fr curve, not a single static figure. ## Feedback, poles and the electrical face Feedback is absolute multiturn SinCos Hiperface with 128 periods of speed feedback resolution on a 6-pole rotor — Hiperface is the protocol that lets the drive read absolute position on power-up without a homing routine, which matters on machines that cannot tolerate a return-to-reference move at every restart. Line-rated current is 1.5 A continuous with a continuous stall current of 2.5 A and a maximum Irms of 11.8 A — the Irms ceiling is the short-term peak the drive will deliver before folding back, and it scales with the 7.6 N·m peak torque figure above. Back-EMF constant is 48 V/krpm at 20 °C, so a coasting motor at 6000 rpm will generate roughly 288 V across the phases — the DC bus must be sized to absorb or the drive will trip on overvoltage. ## Sealing, cooling and what IP65 really buys Cooling is natural convection with no integrated fan, so the motor depends on a clean, unblocked housing surface — mounting it inside a sealed cabinet without clearance will throttle the continuous rating. IP65 sealing on the housing means dust-tight and resistant to low-pressure water jets, which opens the door to food-adjacent lines, machine-tool enclosures with coolant splash, and outdoor cabinets — but it does not cover high-pressure washdown or temporary immersion.","metaTitle":"Schneider ILM0702P22A0000 Servo Motor, 720 W, 1.15 N·m","metaDescription":"Schneider Electric ILM0702P22A0000 PacDrive 3 ILM integrated-drive servo motor, 720 W, 1.15 N·m nominal, 6000 rpm, IP65. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Length":"8.9 in (226 mm)","IP Rating":"IP65","Feedback Type":"Absolute multiturn SinCos Hiperface","Product Status":"Active","Shaft Diameter":"0.4 in (11 mm)","Shaft End Type":"Untapped","Max Axial Force Fa N":"0.2 x Fr","Centring Collar Diameter":"2.4 in (60 mm)","Main Product Or Component Type":"Servo motor integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b0b444afc18f0bb00040cac83d25b980.pdf","sourceUrl":"https://www.se.com/us/en/product/ILM0702P22A0000/ilm-integrated-drive-70mm-2-stacks-smooth-shaft-ip65-sincos-multiturn-128-no-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM0702P22A0000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0702P22A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0702P22A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}