{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0702P32F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0702P32F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0702P32F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0702P32F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series servo motor integrated drive, 720 W nominal output, 1.15 N.m nominal torque, 11.8 A peak, IP65, keyed shaft, holding brake, 70 mm flange.","salesMarkdown":"## Where this motor drops in The ILM0702P32F0000: The part is a PacDrive 3 ILM-series servo motor integrated drive from Schneider Electric, built around a 70 mm flange and a 252 mm body length that slots into the standard international flange footprint common on packaging, converting, and indexing lines driven from a PacDrive LMC motion controller. Cooling is natural convection and the housing is sealed to IP65, which is what you want when the drive-end of the machine sees washdown mist or cutting fluid splash — no fan to clog, no grille to seal around. ## Continuous and peak torque envelope Continuous ratings are 720 W shaft output, 1.15 N.m nominal torque at 1.5 A line current, with a 1.7 N.m continuous stall at 2.5 A — sized for steady-state indexer and conveyor duties, not heavy punching. Peak stall reaches 7.6 N.m at 11.8 A Irms, so the drive has roughly 6.6× headroom over nominal torque for acceleration transients — the kind of margin you need for cam profiles and flying-cut starts without tripping the drive on peak current. Top operating speed is 6000 rpm with a 6-pole rotor; back-EMF constant sits at 48 V/krpm at 20 °C, which is what the LMC sizing tool balances against the DC bus voltage to pick the right winding for the speed window. ## Feedback, brake, and shaft-side mechanics Feedback is a SinCos Hiperface absolute multiturn encoder, so the drive knows absolute shaft position at power-on — no homing routine needed after an E-stop on machines where the cam profile references an absolute angle. A holding brake is fitted rated 3 N.m static torque — that figure is the holding number, not a dynamic braking rating, so do not spec it for cyclic stopping duty. The keyed shaft is 11 mm diameter by 23 mm long with no second shaft end. Shaft loading is bounded by a maximum radial force Fr that drops from 710 N at 1000 rpm to 390 N at 6000 rpm, with axial load capped at 0.2 × Fr — belt drives and short couplings are fine, but a long arm with an overhung pulley needs the numbers run through the Fr curve, not the headline.","metaTitle":"Schneider ILM0702P32F0000 servo motor, 720 W, IP65","metaDescription":"Schneider Electric ILM0702P32F0000 PacDrive 3 ILM integrated servo motor, 720 W output, 1.15 N.m nominal torque, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM0702P32F0000","Length":"9.9 in (252 mm)","Category":"US1PC5218351","Key width":"0.7 in (18 mm)","Shaft end":"Keyed","description":"ILM integrated drive, 70mm, 2 stacks, keyed Shaft, IP65, SinCos Multiturn 128, Brake","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"6000 rpm","Rotor inertia":"0.51 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"10.18 lbf.in (1.15 N.m)","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.76 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m)","Stator inductance":"19 mH 68 °F (20 °C) Ph/Ph 9.5 mH 248 °F (120 °C) Ph/N","Stator resistance":"4.2 Ohm 68 °F (20 °C) Ph/Ph 2.92 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.5 A","Maximum current Irms":"11.8 A","Nominal Output Power":"720 W","Centring collar depth":"0.10 in (2.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"6","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Continuous stall torque":"15.05 lbf.in (1.7 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.5 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/80cf50ef6de6e19cfcc8c6e6b38fae02.pdf","sourceUrl":"https://www.se.com/be/en/product/ILM0702P32F0000/ilm-integrated-drive-70mm-2-stacks-keyed-shaft-ip65-sincos-multiturn-128-brake/"},"ai":{"faq":[{"question":"Who supplies ILM0702P32F0000 and how is it quoted for volume purchases?","answer":"It is sourced through independent industrial-automation distribution against an RFQ — no authorized or OEM-direct channel is claimed here."},{"question":"What is the listed length of ILM0702P32F0000?","answer":"The body length is 9.9 in (252 mm) on a 70 mm flange, with four 5.5 mm mounting holes on the international standard flange pattern and a 60 mm centring collar."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0702P32F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0702P32F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}