{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0703P11F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0703P11F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0703P11F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0703P11F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor with integrated drive, 70 mm flange, 720 W, keyed shaft, holding brake, Hiperface feedback.","salesMarkdown":"## Form factor and shaft geometry The ILM0703P11F0000 is a Schneider Electric PacDrive 3 series servo motor with integrated drive, built on a 70 mm flange at 11.5 in (293 mm) long with four 5.5 mm mounting holes on a 60 mm centring collar. The output shaft is keyed, 14 mm diameter by 30 mm long with a 20 mm key, and there is no second shaft end — a single-ended shaft simplifies the coupling choice but locks the mounting orientation to the brake side. ## Torque, current and power envelope Continuous stall torque is 2.2 N.m at 3 A, nominal torque is 1.15 N.m, and peak stall torque reaches 8.7 N.m — the 3.95× peak-to-continuous headroom is what the drive commands during accelerations before tripping into the Irms ceiling. Nominal output power is 720 W at a 1.5 A line-rated current, with a 12 A Irms peak, so the upstream servo amplifier sizing is set by the 12 A transient, not the 1.5 A nominal. ## Speed, feedback and brake Position feedback is an absolute single-turn SinCos Hiperface encoder, and the integrated holding brake delivers 3 N.m of static torque — pair the brake as a parking/latch only; the 8.7 N.m peak stall is far above what the brake holds, so the brake is not a dynamic stop. ## Thermal and electrical constants Stator resistance measures 2.7 Ohm phase-to-phase at 20 °C falling to 1.88 Ohm phase-to-neutral at 120 °C; inductance is 13 mH phase-to-phase at 20 °C and 6.5 mH phase-to-neutral at 120 °C — copper drop dominates the I²R loss budget and must be derated against the winding temperature curve, not the ambient. Back-EMF constant is 49 V/krpm at 20 °C and torque constant is 0.76 N.m/A at 120 °C, so a 6000 rpm top speed generates roughly 294 V of BEMF — the drive's DC bus must clear that with margin or the regenerative current clips into the brake circuit. ## Shaft loading and environmental ratings Maximum radial force Fr is derated from 730 N at 1000 rpm down to 400 N at 6000 rpm, with axial force capped at 0.2× Fr — a belt drive on the high-speed end of this curve is the typical fatigue path; couplings that introduce side-load must be re-checked at the operating rpm, not the rated stall. Cooling is natural convection and the sealing is IP54 — this is a cabinet-internal servo, not a washdown or food-grade mounting; any direct splash or oil-mist exposure needs an external shroud or a higher-IP variant from the ILM family. ## Sourcing posture The part ships one per package and is sourced against the BOM quantity, not from a stocked shelf — plan RFQ lead time into the cabinet build rather than treating it as a same-day pull.","metaTitle":"Schneider ILM0703P11F0000 PacDrive 3 servo motor, 720 W","metaDescription":"Schneider Electric ILM0703P11F0000 PacDrive 3 ILM integrated-drive servo motor, 70 mm flange, 720 W, with brake. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM0703P11F0000","Length":"11.5 in (293 mm)","Category":"US1PC5218351","Key width":"0.8 in (20 mm)","Shaft end":"Keyed","description":"ILM integrated drive, 70mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, Brake","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"6000 rpm","Rotor inertia":"0.88 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"10.18 lbf.in (1.15 N.m)","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.76 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"77.001 lbf.in (8.7 N.m)","Stator inductance":"13 mH 68 °F (20 °C) Ph/Ph 6.5 mH 248 °F (120 °C) Ph/N","Stator resistance":"2.7 Ohm 68 °F (20 °C) Ph/Ph 1.88 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.5 A","Maximum current Irms":"12 A","Nominal Output Power":"720 W","Centring collar depth":"0.10 in (2.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"6","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Continuous stall torque":"19.5 lbf.in (2.2 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/60159de008a71b6c508294a0047a16e6.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM0703P11F0000/ilm-integrated-drive-70mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake/"},"ai":{"faq":[{"question":"Where can I buy ILM0703P11F0000 and how do I get a price?","answer":"No per-unit price, stock count, or lead-time figure is published on this page — the BOM quantity drives the quote."},{"question":"What is ILM0703P11F0000's listed length on this Servo Drives line?","answer":"The ILM0703P11F0000 body length is 11.5 in (293 mm), which sets the cabinet depth budget behind the 70 mm flange face."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0703P11F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0703P11F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}