{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0703P21A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0703P21A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0703P21A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0703P21A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor integrated drive, 1.15 N·m nominal torque, 720 W, 6000 rpm, Hiperface SinCos feedback, IP65, flange mount.","salesMarkdown":"## Where this motor drops in the PacDrive 3 stack The ILM0703P21A0000 is a PacDrive 3 ILM-series servo motor integrated drive — a 70 mm flange-frame brushless servo sized for the mid-power motion axis where a PacDrive 3 controller is already driving the bus. It runs naturally cooled with an IP65 seal on the body, so the motor sits comfortably next to the gearbox on a packaging or assembly machine without needing a fan slot in the cabinet. For a commissioning engineer, the headline decision is whether the 1.15 N·m nominal / 8.7 N·m peak envelope covers the axis — the numbers below tell you exactly that. ## Torque, power and current envelope Continuous nominal torque is 1.15 N·m at 6000 rpm, with 720 W of nominal mechanical output power — that is the working point the drive loop will hold most of the cycle. Peak stall torque reaches 8.7 N·m and continuous stall torque 2.2 N·m, which sets the ceiling for short acceleration bursts on a conveyor, indexing table or small-format pick-and-place axis. Line rated current sits at 1.5 A nominal with a 12 A Irms peak, and the torque constant of 0.76 N·m/A at 120 °C is the figure the drive uses to convert current demand into shaft torque — matching this to the PacDrive 3 sizing tool is what keeps the motor out of the I²t trip zone. Continuous stall current is 3 A, so a holding brake application must be sized from that figure rather than the nominal — the motor will sit at 3 A any time it stalls against a load. ## Electrical constants the drive loop needs at first start Back-EMF constant is 49 V/krpm at 20 °C, stator resistance 2.7 Ω phase-to-phase at 20 °C dropping to 1.88 Ω phase-to-neutral at 120 °C, and stator inductance 13 mH phase-to-phase at 20 °C / 6.5 mH phase-to-neutral at 120 °C — these are the auto-tune inputs the PacDrive 3 expects to read back from the motor nameplate or Hiperface memory. Feedback is absolute single-turn SinCos Hiperface with 128 periods of resolution, which gives absolute position from power-up without a homing move — useful on a midnight startup where the controller boots and the line must know where the axis is before the first move command. Six poles and three motor stacks define the electrical architecture behind those constants — the drive counts pulses against the pole pair count to close the commutation loop. ## Mechanical fit, shaft and bearing loads The motor mounts on an international-standard flange with a 70 mm flange face, a 60 mm centring collar taken 2.5 mm deep, and four 5.5 mm mounting holes — it drops onto the same footprint pattern as other ILM-frame PacDrive 3 motors, which keeps the mechanical design simple when an axis is resized. The shaft is 14 mm diameter, 30 mm long and untapped, with no second shaft end and no holding brake — coupling choice is a clamp or compression hub rather than a tapped retainer, and an external brake must be specified separately if the axis needs a fail-safe stop. Maximum radial load Fr runs from 730 N at 1000 rpm down to 400 N at 6000 rpm, and maximum axial load Fa is constrained to 0.2 × Fr — at 6000 rpm with a belt or pinion on the shaft end, the bearing load budget is the figure that governs the coupling geometry, not the torque rating. ## Sourcing reality for this exact order code Independent distribution covers this code against an RFQ: pricing and availability are confirmed at quote time against the requested quantity, with no live stock figure published on this listing.","metaTitle":"Schneider Electric ILM0703P21A0000 PacDrive 3 servo motor","metaDescription":"Schneider Electric ILM0703P21A0000 PacDrive 3 ILM servo motor, 720 W, 1.15 N·m nominal, IP65, Hiperface feedback. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM0703P21A0000","Length":"10.2 in (259 mm)","Category":"US1PC5218351","Key width":"0.8 in (20 mm)","Shaft end":"Untapped","description":"ILM integrated drive, 70mm, 3 stacks, smooth Shaft, IP65, SinCos Singleturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"Without","Nominal speed":"6000 rpm","Rotor inertia":"0.58 kg.cm²","Nominal torque":"10.18 lbf.in (1.15 N.m)","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.76 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"77.001 lbf.in (8.7 N.m)","Stator inductance":"13 mH 68 °F (20 °C) Ph/Ph 6.5 mH 248 °F (120 °C) Ph/N","Stator resistance":"2.7 Ohm 68 °F (20 °C) Ph/Ph 1.88 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.5 A","Maximum current Irms":"12 A","Nominal Output Power":"720 W","Centring collar depth":"0.10 in (2.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"6","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Continuous stall torque":"19.5 lbf.in (2.2 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c0069eebdea4aa0e2ee19496f09b8946.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM0703P21A0000/ilm-integrated-drive-70mm-3-stacks-smooth-shaft-ip65-sincos-singleturn-128-no-brake/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to ILM0703P21A0000 within the PacDrive 3 family?","answer":"Within the same ILM 70 mm flange frame, the next-larger PacDrive 3 ILM motor carries higher nominal torque at the same 6000 rpm ceiling, sharing the international-standard flange footprint and Hiperface feedback — so mechanically it drops into the same mounting pattern and electrical interface while delivering more continuous torque for a heavier axis. The drop-down option is an ILM with the same 70 mm frame and a shorter stack, sharing flange, shaft and feedback but trading peak torque for lower rotor inertia on a faster cycle. Confirm the exact stack variant against the BOM and the drive siz"}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0703P21A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0703P21A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}