{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0703P21F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0703P21F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0703P21F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0703P21F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM integrated servo motor, 720 W nominal, 6000 rpm, Hiperface absolute single-turn feedback, holding brake, IP65, 70 mm flange.","salesMarkdown":"## Form-factor reality for a PacDrive 3 ILM Schneider Electric ILM0703P21F0000 is an integrated servo motor — drive electronics co-packaged with the motor — in the PacDrive 3 ILM family, built around a 70 mm flange and an overall body length of 11.5 in (293 mm). The shaft is a 14 mm-diameter, untapped single-end with a 30 mm length and a 60 mm centring collar; the flange uses four 5.5 mm mounting holes, so it drops into a standard machine-builder foot pattern without adaptor plates. Cooling is natural convection with an IP65 rating on the body — splash- and dust-resistant for an enclosure-free cabinet wall or a washdown-adjacent machine frame, but not a fully sealed submergence duty. ## 720 W of torque in 1.15 N.m continuous slices The ILM0703P21F0000 is rated 720 W nominal output with a continuous torque of 1.15 N.m at 1.5 A line current, climbing to a peak stall torque of 8.7 N.m at a maximum Irms of 12 A — meaning the same frame that runs a steady conveyor or indexing table can also deliver short bursts for acceleration ramps and punch-press cycles. With a torque constant of 0.76 N.m/A (at 120 °C) and a back-EMF constant of 49 V/krpm (at 20 °C), sizing the upstream PacDrive controller comes down to matching the bus voltage headroom against the 6000 rpm nominal ceiling — every 1000 rpm of speed adds roughly 49 V of generated EMF that the drive has to overcome at constant speed. Stator resistance is 2.7 Ohm Ph/Ph at 20 °C (1.88 Ohm Ph/N at 120 °C) and inductance is 13 mH Ph/Ph at 20 °C; the continuous stall current is 3 A against a 19.5 lbf.in (2.2 N.m) continuous stall torque, so the I²R thermal envelope is what limits long-duration holds at zero speed — a stalled axis needs the duty cycle watched, not just the current. ## Feedback, brake, and what the shaft actually carries Position feedback is an absolute single-turn SinCos Hiperface device, which means the controller reads absolute position within one mechanical revolution on power-up — no homing move required after every restart — at a resolution that supports the PacDrive 3 motion loop without an external encoder. Shaft loading is governed by a derating curve: radial force Fr is rated 730 N at 1000 rpm and drops to 400 N at 6000 rpm, while the maximum axial force Fa is limited to 0.2 x Fr — direct-coupled gearboxes and belt drives need their overhung load checked against the curve at the operating speed, not the headline rpm. ## Sourcing posture for an integrated servo on a machine build The ILM0703P21F0000 sits in the PacDrive 3 integrated-motor line and is specified for current production on the datasheet family record — the spec sheet carries a current lifecycle marker but no last-time-buy date or phase-out successor is published, so the buyer's risk is on availability through the authorised channel rather than on a forced redesign. Integrated servo motors of this class are typically built to order against a PacDrive controller pairing, so the practical path for a small-shop owner or an integrator is to quote the BOM line — motor plus mating PacDrive controller plus cabling — as one RFQ rather than treat the motor as a generic MRO spare.","metaTitle":"Schneider ILM0703P21F0000 PacDrive 3 Servo, 720 W, IP65","metaDescription":"Schneider Electric PacDrive 3 ILM integrated servo motor, 720 W, 6000 rpm, Hiperface feedback, holding brake, IP65. Quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Length":"11.5 in (293 mm)","IP Rating":"IP65","Product Status":"Active","Shaft Diameter":"0.6 in (14 mm)","Shaft End Type":"Untapped","Max Axial Force Fa N":"0.2 x Fr","Centring Collar Diameter":"2.4 in (60 mm)","Main Product Or Component Type":"Servo motor integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7d1589d773e5eaf0f0777598f6d2cea9.pdf","sourceUrl":"https://www.se.com/be/en/product/ILM0703P21F0000/ilm-integrated-drive-70mm-3-stacks-smooth-shaft-ip65-sincos-singleturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM0703P21F0000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0703P21F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0703P21F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}