{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM0703P32A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM0703P32A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM0703P32A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM0703P32A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM-series servo motor, integrated drive type, 1.15 N·m nominal torque, 720 W, IP65, SinCos Hiperface multiturn feedback, ILM0703P32A0000.","salesMarkdown":"## Identifying the unit on the line The ILM0703P32A0000 is a Schneider Electric PacDrive 3 ILM-series servo motor, built as an integrated-drive type rather than a standalone servo paired with a separate amplifier. ## Sizing torque, speed, and the working envelope Continuous nominal torque is 1.15 N·m at 6000 rpm rated speed, with continuous stall torque 2.2 N·m and a peak stall of 8.7 N·m — roughly 7.6× nominal as the dynamic headroom the drive can pull on during acceleration or shock loads. Continuous output power is 720 W with natural-convection cooling — no blower, no fan, no forced-air duct at the cabinet, which simplifies panel layout but means the 2.2 N·m stall figure assumes the body sits in still air with the heatsink path clear. ## Electrical constants the drive will need The winding draws 1.5 A nominal at 3 A continuous stall, with a 12 A Irms ceiling for peak torque — the torque constant of 0.76 N·m/A at 120 °C is the number that maps that 12 A Irms to the 8.7 N·m peak on the nameplate. Stator resistance is 2.7 Ohm phase-to-phase at 20 °C, dropping to 1.88 Ohm phase-to-neutral at the 120 °C thermal model; inductance is 13 mH at 20 °C and 6.5 mH at 120 °C. Back-EMF constant is 49 V/krpm at 20 °C, so 6000 rpm produces roughly 294 V of generated EMF that the drive bus must absorb cleanly during fast decel. ## Feedback, sealing, and the load the bearings will hold Feedback is an absolute multiturn SinCos Hiperface encoder at 128-period resolution, so the drive knows absolute shaft position at power-on without a homing move — useful on machines that cannot afford the lost cycle of a reference run after every E-stop. Sealing is IP65 on the body, so the motor survives washdown and dusty cell environments as long as the mating connector carries the equivalent rating. Maximum radial load is 730 N at 1000 rpm and falls with speed to 400 N at 6000 rpm, with axial load capped at 0.2 × Fr — these are the bearing-life numbers to budget when a belt drive or pinion is bolted to the shaft. Mounting is the standard international flange with a 60 mm centring collar at 2.5 mm depth and four 5.5 mm mounting holes on the 70 mm bolt circle — that footprint matches the rest of the PacDrive 3 ILM family, which is what lets the axis be resized with a longer-stack motor without re-drilling the machine frame.","metaTitle":"Schneider Electric ILM0703P32A0000 Servo Motor, 1.15 N·m","metaDescription":"Schneider Electric ILM0703P32A0000 PacDrive 3 ILM servo motor, 1.15 N·m nominal, 720 W, IP65, SinCos Hiperface feedback. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM0703P32A0000","Length":"10.2 in (259 mm)","Category":"US1PC5218351","Key width":"0.8 in (20 mm)","Shaft end":"Keyed","description":"ILM integrated drive, 70mm, 3 stacks, keyed Shaft, IP65, SinCos Multiturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"6000 rpm","Rotor inertia":"0.58 kg.cm²","Nominal torque":"10.18 lbf.in (1.15 N.m)","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.76 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"77.001 lbf.in (8.7 N.m)","Stator inductance":"13 mH 68 °F (20 °C) Ph/Ph 6.5 mH 248 °F (120 °C) Ph/N","Stator resistance":"2.7 Ohm 68 °F (20 °C) Ph/Ph 1.88 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.5 A","Maximum current Irms":"12 A","Nominal Output Power":"720 W","Centring collar depth":"0.10 in (2.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"6","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Continuous stall torque":"19.5 lbf.in (2.2 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b4006d9ee85c45e023ee02fcccc04269.pdf","sourceUrl":"https://www.se.com/us/en/product/ILM0703P32A0000/ilm-integrated-drive-70mm-3-stacks-keyed-shaft-ip65-sincos-multiturn-128-no-brake/"},"ai":{"faq":[{"question":"What does the ILM0703P32A0000 deliver on a PacDrive 3 axis?","answer":"It is a 70 mm flange ILM servo motor, 1.15 N·m nominal torque at 6000 rpm, 2.2 N·m continuous stall, 8.7 N·m peak, 720 W continuous output, with absolute multiturn SinCos Hiperface feedback and IP65 sealing — sized as the short-stack low-inertia member of the PacDrive 3 ILM family for fast index moves rather than slow constant-torque duty."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM0703P32A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM0703P32A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}