{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1001P01A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1001P01A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1001P01A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1001P01A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series servo motor, 100 mm flange, 600 W nominal output, single-turn SinCos Hiperface feedback, IP54, natural convection cooling.","salesMarkdown":"## Why this PacDrive 3 motor in a 600 W machine The Schneider Electric ILM1001P01A0000 is an ILM-series integrated-drive servo motor in the PacDrive 3 range. At a 600 W nominal output with 1.9 N·m nominal torque at 3000 rpm, it sits in the small-frame bracket where motion builders want compact torque without surrendering the PacDrive 3 control architecture — a sizing profile that maps to indexing tables, small-format conveyors, and packaging axis duties rather than the heavy-mill work handled by larger PacDrive frames. ## Torque envelope and where it actually limits Continuous stall torque is 2.5 N·m and peak stall torque 9.6 N·m — the peak figure is roughly five times the nominal rating, which is the burst reserve a servo needs to accelerate an inertial load before thermal limits bite. Nominal torque of 1.9 N·m at 3000 rpm sets the continuous working point; for sizing, that pair (not the peak) is what governs the steady-state mechanical output the machine designer can rely on cycle after cycle. ## Current ratings and what the drive sees Continuous stall current is 1.8 A and maximum rms current 7.4 A on a line-rated current of 1.4 A. The 7.4 A ceiling is the short-duration limit the drive will command during acceleration peaks; the 1.4 A line figure is what sizes branch protection and the upstream 24 V / DC-bus budget on the PacDrive 3 rack. ## Mechanical fit on the machine The 100 mm motor flange with a 95 mm centring collar at 3.5 mm depth and four 9 mm mounting holes follows the IEC small-frame convention; international-standard flange mounting means the motor drops onto the same footprint pattern as other 100 mm-frame servos, simplifying a retrofit into existing machine bases. Shaft diameter is 19 mm with a 40 mm usable length and a 30 mm keyway width on an untapped shaft end, with no second shaft extension and no holding brake fitted. Axial force is rated at 0.2 × Fr, and radial force Fr is 900 N at 1000 rpm dropping to 720 N at 2000 rpm and 630 N at 3000 rpm. When the motor drives a belt or pinion, the radial load derating curve is the spec the mechanical designer must check — running closer to 3000 rpm with a high pre-load shortens bearing life well before the electrical envelope is approached. ## Feedback, sealing, cooling Feedback is a single-turn absolute SinCos Hiperface encoder with 128 periods of resolution — enough for commutation and absolute position within one turn, which suits the rotary-axis work typical of PacDrive 3 machines rather than linear or multi-turn gear applications. IP54 sealing and natural convection cooling place the motor in cabinet-mounted or light-dust environments; it is not a washdown-rated or force-ventilated unit, so plan enclosure airflow accordingly. ## Sourcing posture Compliance documentation (RoHS, REACH, UL, IEC) is not carried in this evidence set and is not asserted here.","metaTitle":"Schneider Electric ILM1001P01A0000 PacDrive 3 servo motor","metaDescription":"Schneider Electric ILM1001P01A0000 PacDrive 3 ILM servo motor, 600 W / 1.9 N·m nominal, 100 mm flange.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM1001P01A0000","Length":"8.5 in (215 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Untapped","description":"ILM integrated drive, 100mm, 1 stack, smooth Shaft, SinCos Singleturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"Without","Nominal speed":"3000 rpm","Rotor inertia":"1.4 kg.cm²","Nominal torque":"16.8 lbf.in (1.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.39 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"90 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m)","Stator inductance":"45.7 mH 68 °F (20 °C) Ph/Ph 22.85 mH 248 °F (120 °C) Ph/N","Stator resistance":"9.8 Ohm 68 °F (20 °C) Ph/Ph 6.82 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.4 A","Maximum current Irms":"7.4 A","Nominal Output Power":"600 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"22.1 lbf.in (2.5 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b5d55ad93a2a504b723d8df50f8d8c47.pdf","sourceUrl":"https://www.se.com/us/en/product/ILM1001P01A0000/ilm-integrated-drive-100mm-1-stack-smooth-shaft-sincos-singleturn-128-no-brake/"},"ai":{"faq":[{"question":"Who supplies ILM1001P01A0000 and how is it quoted for volume purchases?","answer":"It is sourced through independent industrial-automation distribution against an RFQ — volume pricing and lead time confirmed per quote, no stock count or fixed lead time asserted here. Specify the 600 W nominal rating and the PacDrive 3 / ILM-series identity when requesting the quote so the line is matched to the right BOM position."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1001P01A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1001P01A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}