{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1001P02F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1001P02F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1001P02F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1001P02F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric ILM1001P02F0000, PacDrive 3 integrated servo motor, 600 W, 1.9 N·m nominal, 100 mm flange, IP54, natural convection.","salesMarkdown":"## ILM1001P02F0000 — what lands in the panel The part is a Schneider Electric ILM-series integrated servo motor in the PacDrive 3 range — the drive electronics sit inside the motor housing rather than in a separate cabinet, which removes one cable run and one panel slot per axis on a packaging or assembly machine. ## Torque and speed envelope Continuous rating is 600 W output with 1.9 N·m nominal torque at 3000 rpm, so the working point for a typical sizing calculation sits well inside the 2.5 N·m continuous stall and 9.6 N·m peak stall envelope — peak is roughly five times nominal, which is the margin the drive uses for accel/decel transients. Continuous current is 1.4 A against a 7.4 A Irms maximum, so the drive's current loop has roughly five times headroom over the rated working point — that ratio is what lets the motor accelerate an inertial load without saturating the controller. ## Feedback, brake, and electrical constants Position feedback is absolute multiturn SinCos Hiperface, which means the absolute position is valid at power-on without a homing move — the controller knows shaft angle before the first motion command, which simplifies machine startup and recovery after an e-stop. An integrated holding brake delivers 5.5 N·m of static torque, sized to hold the vertical axis against gravity when the bus drops — the brake is the failsafe element, not the dynamic stop, so dynamic braking energy has to stay within the drive's internal absorption. Stator resistance measures 9.8 Ω phase-to-phase at 20 °C and back-EMF constant is 90 V/krpm, so the drive's bus voltage ceiling and the motor's back-EMF at top speed have to be checked together — running above the field-weakening threshold with this back-EMF constant will trip a DC-bus overvoltage. ## Mechanical envelope and shaft loading Flange size is 100 mm with an international-standard flange mount, 9 mm mounting holes on a four-bolt pattern, and a 19 mm shaft — this is the standard mounting footprint for an ILM 100-frame motor, so any existing machine bracket or gearbox input sized to this frame accepts the part without machining. Maximum radial force is 900 N at 1000 rpm derating to 630 N at 3000 rpm, with maximum axial force capped at 0.2 × Fr — at top speed the coupling or pulley choice drives the radial load budget, not the bearing's static rating, so a separate shaft-loading calculation is required for belt and pinion drives.","metaTitle":"Schneider ILM1001P02F0000 PacDrive 3 Servo Motor, 600 W","metaDescription":"Schneider Electric ILM1001P02F0000 PacDrive 3 integrated servo motor, 600 W, 1.9 N·m nominal torque. Current production; quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Drives"],"specifications":{"Length":"9.6 in (243 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Untapped","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"2.1 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"16.8 lbf.in (1.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.39 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"90 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m)","Stator inductance":"45.7 mH 68 °F (20 °C) Ph/Ph 22.85 mH 248 °F (120 °C) Ph/N","Stator resistance":"9.8 Ohm 68 °F (20 °C) Ph/Ph 6.82 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.4 A","Maximum current Irms":"7.4 A","Nominal Output Power":"600 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"22.1 lbf.in (2.5 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8e74b809e666543a90c001e9bb76e468.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1001P02F0000/ilm-integrated-drive-100mm-1-stack-smooth-shaft-sincos-multiturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1001P02F0000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy ILM1001P02F0000 and how do I get a price?","answer":"Source the code through independent industrial-automation distribution — pricing and current availability are confirmed at quote time against the specific BOM quantity and lead-time requirement, no standing stock figure carried on this listing."},{"question":"What is the closest pin-compatible alternative to ILM1001P02F0000 in the PacDrive 3 family?","answer":"The next step inside the same ILM 100-frame line is a higher-wattage variant with the same 100 mm flange, IP54 rating and integrated-drive architecture — a true drop-in for the mounting envelope. Confirm torque, current, and feedback options against the new BOM before substituting, because output power and brake options change between siblings."},{"question":"What is ILM1001P02F0000's listed length on the Servo Drives line?","answer":"Length is 9.6 in (243 mm) end-to-end with a 1.6 in (40 mm) shaft extension and a 30 mm key width — the cabinet cutout and cable bend radius have to clear the full body length, not just the flange depth."},{"question":"What is ILM1001P02F0000's listed category on the Servo Drives line?","answer":"The category reference on this listing is US1PC5218351, which is the Schneider internal classification for the PacDrive 3 integrated-servo-motor family."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1001P02F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1001P02F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}