{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1001P11F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1001P11F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1001P11F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1001P11F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series servo motor integrated drive, 600 W, 1.9 N·m nominal torque, 3000 rpm, 100 mm flange, IP54, ILM1001P11F0000.","salesMarkdown":"## What the ILM1001P11F0000 actually is in a PacDrive 3 panel The ILM1001P11F0000 is a Schneider Electric PacDrive 3 ILM servo motor with an integrated drive — a single mechanical unit that combines the motor, feedback device, and servo amplifier in one housing rather than a separate drive cabinet and motor cable run. The Device short name is ILM and the Product or Component Type is servo motor integrated drive, both pulled from the device record itself. That integration is the main reason the part is specified for machine builders who want to cut cabinet volume and the cabling between controller, drive, and motor. The motor delivers 600 W of nominal output power at 3000 rpm, with a nominal torque of 1.9 N·m and a continuous stall torque of 2.5 N·m when the rotor is held at zero speed. Peak stall torque reaches 9.6 N·m for short acceleration and deceleration moves — the figure a sizing engineer looks at when calculating the worst-case mechanical load during a fast index. The continuous stall current is 1.8 A and the maximum RMS current is 7.4 A, so the drive section has the headroom to deliver those peak torques without immediately tripping. ## Feedback, brake, and the constants the commissioning engineer sets against Feedback is an absolute single-turn SinCos Hiperface encoder, which gives the drive absolute position on power-up without a homing move — important on machines where the load can drift while the controller is off. The torque constant is 1.39 N·m/A measured at 120 °C winding temperature, and the back-EMF constant is 90 V/krpm at 20 °C; both numbers are what the drive uses internally to translate a current command into a torque output and a speed into a generated voltage, so they directly affect loop tuning. Stator resistance is 9.8 Ω phase-to-phase at 20 °C and stator inductance is 45.7 mH phase-to-phase at the same point — these set the electrical time constant of the motor and constrain how aggressively the current loop can be closed. The motor is supplied with a holding brake sized at 5.5 N·m, enough to hold the rotor and any vertical-axis load stationary when the servo is de-energised; this is the figure the safety circuit checks when verifying the axis will not drop on a power loss. ## Mounting, thermal, and what the flange tells the panel builder The motor flange is 100 mm with a centring collar diameter of 95 mm, mounting on an international standard flange pattern with four 9 mm holes — a common footprint that drops into a standard machine-frame cut-out. The shaft is keyed, 19 mm in diameter and 40 mm long, with no second shaft end; the maximum radial force the bearing can absorb is 900 N at 1000 rpm, dropping to 630 N at the 3000 rpm nominal speed, and the maximum axial force is capped at 0.2 × Fr. A pulley or pinion that pushes those limits is a service-life problem the bearing will surface first.","metaTitle":"Schneider Electric ILM1001P11F0000 PacDrive 3 Servo Motor","metaDescription":"Schneider Electric ILM1001P11F0000 PacDrive 3 ILM servo motor, integrated drive, 600 W output, 1.9 N·m nominal torque. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"Length":"9.6 in (243 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Keyed","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"2.1 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"16.8 lbf.in (1.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.39 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"90 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m)","Stator inductance":"45.7 mH 68 °F (20 °C) Ph/Ph 22.85 mH 248 °F (120 °C) Ph/N","Stator resistance":"9.8 Ohm 68 °F (20 °C) Ph/Ph 6.82 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.4 A","Maximum current Irms":"7.4 A","Nominal Output Power":"600 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"22.1 lbf.in (2.5 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/afb48e23da357a501d757dedf7d4aced.pdf","sourceUrl":"https://www.se.com/be/en/product/ILM1001P11F0000/ilm-integrated-drive-100mm-1-stack-keyed-shaft-sincos-singleturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1001P11F0000/alternatives.json"},"ai":{"faq":[{"question":"What is ILM1001P11F0000's listed length on this Servo Drives line?","answer":"The motor body length is 9.6 in (243 mm), measured along the axis of the shaft. That figure drives the axial cut-out length in the machine frame and is the dimension the panel builder checks against the existing bracket when retrofitting."},{"question":"What is ILM1001P11F0000's listed category on this Servo Drives line?","answer":"The category code recorded against this MPN is US1PC5218351, which is Schneider Electric's internal classification for the part. Buyers do not need to enter that code when ordering — the ILM1001P11F0000 order string is the unique identifier the channel works from."},{"question":"What torque can the ILM1001P11F0000 deliver continuously versus in a peak move?","answer":"Continuous (nominal) torque is 1.9 N·m at 3000 rpm, continuous stall torque is 2.5 N·m with the rotor at standstill, and peak stall torque reaches 9.6 N·m for short dynamic moves. The 7.4 A maximum RMS current against the 1.8 A continuous stall current is the headroom the drive uses to deliver that peak without tripping."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1001P11F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1001P11F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}