{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1001P21A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1001P21A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1001P21A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1001P21A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric ILM1001P21A0000, PacDrive 3 ILM-series servo motor integrated drive, 600 W, 16.8 lbf.in nominal torque, IP65, international standard flange.","salesMarkdown":"## PacDrive 3 ILM motor — what the part is The Schneider Electric ILM1001P21A0000 is a servo motor integrated drive in the PacDrive 3 family, sized at 100 mm flange with an international standard flange mount. It packages the drive electronics into the motor housing, so the cabinet-side controller sees a single cable and a single motor object rather than a separate drive and motor pair. ## Ratings that decide the fit Nominal output is 600 W at 3000 rpm, with a nominal torque of 16.8 lbf.in — the combination is what an integrator reads off the torque/speed curve to confirm the motor will hold the load across the operating speed range without slipping into the continuous-stall region. Line current sits at 1.4 A nominal with a continuous stall current of 1.8 A; the maximum Irms ceiling is 7.4 A, and the torque constant is 1.39 N.m/A at 120 °C — so any drive paired with this motor must source up to that Irms without saturating, and the torque-loop gain scales directly off the per-amp constant at operating temperature. Peak stall torque is 85.0 lbf.in, the figure an integrator reads for short-term overload margin on acceleration ramps. ## Mounting geometry and shaft loads Overall length is 8.5 in (215 mm), key width 1.2 in (30 mm), shaft length 1.6 in (40 mm), and shaft diameter 0.7 in (19 mm) with an untapped shaft end — flange-mounted on a 100 mm face with four 0.4 in (9 mm) mounting holes and a centring collar at 3.7 in (95 mm) diameter by 0.1 in (3.5 mm) deep. Maximum radial load is 900 N at 1000 rpm stepping down to 630 N at 3000 rpm; maximum axial force is 0.2 × radial — the radial figure is what most belts and direct-coupled gearboxes design against, not the headline torque. ## Environment, cooling and sealing Cooling is natural convection — no integrated fan, so the cabinet or machine-frame attachment must reject the I²R loss to the surrounding structure rather than to airflow. Sealing is IP65, which closes the gap against dust ingress and water jets, but rules out submerged or high-pressure washdown duty without an external cover. ## Sourcing posture No price, stock count, lead-time figure or authorisation claim is asserted on-page; those come back with the quote on the RFQ.","metaTitle":"Schneider Electric ILM1001P21A0000 servo motor, 600 W","metaDescription":"Schneider Electric ILM1001P21A0000 integrated servo motor in the PacDrive 3 family: 600 W output, 16.8 lbf.in nominal torque, IP65, quoted to order against the","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM1001P21A0000","Length":"8.5 in (215 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Untapped","description":"ILM integrated drive, 100mm, 1 stack, smooth Shaft, IP65, SinCos Singleturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"Without","Nominal speed":"3000 rpm","Rotor inertia":"1.4 kg.cm²","Nominal torque":"16.8 lbf.in (1.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.39 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"90 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m)","Stator inductance":"45.7 mH 68 °F (20 °C) Ph/Ph 22.85 mH 248 °F (120 °C) Ph/N","Stator resistance":"9.8 Ohm 68 °F (20 °C) Ph/Ph 6.82 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.4 A","Maximum current Irms":"7.4 A","Nominal Output Power":"600 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"22.1 lbf.in (2.5 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f502e1453840796a7a33eb4809ecca98.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1001P21A0000/ilm-integrated-drive-100mm-1-stack-smooth-shaft-ip65-sincos-singleturn-128-no-brake/"},"ai":{"faq":[{"question":"Where can I buy ILM1001P21A0000 and how do I get a price?","answer":"The ILM1001P21A0000 is sourced and quoted to order through independent industrial-automation distribution — submit the BOM line for a quote with quantity, and pricing and lead time come back with the RFQ response."},{"question":"What are the key ratings that decide whether ILM1001P21A0000 fits the machine?","answer":"Nominal output is 600 W at 3000 rpm, nominal torque is 16.8 lbf.in, continuous stall torque is 22.1 lbf.in, and peak stall torque is 85.0 lbf.in. Maximum Irms is 7.4 A; the drive must source that current without saturation. Feedback is absolute single-turn SinCos Hiperface at 128 periods with 8 rotor poles. Sealing is IP65 with natural convection cooling."},{"question":"Does ILM1001P21A0000 include a holding brake?","answer":"No — the part is listed Without holding brake. The line-side safety circuit must provide the holding torque through a separate mechanical brake on the load."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1001P21A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1001P21A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}