{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1001P22F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1001P22F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1001P22F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1001P22F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series integrated servo motor, 600 W nominal, 1.9 N·m nominal torque, 3000 rpm, IP65, SinCos Hiperface multiturn feedback, integrated holding brake.","salesMarkdown":"## What this motor is, and what the headline numbers buy you The ILM1001P22F0000 is a Schneider Electric PacDrive 3 ILM-series integrated servo motor — drive and motor in one unit — sized for 600 W of continuous mechanical output at 1.9 N·m nominal torque up to 3000 rpm, so it fits mid-range indexing and conveyor axes where a separate servo amplifier would only add panel space. The integrated-drive format collapses the amplifier chassis into the motor housing, so cabling reduces to a hybrid cable for power and a single-bus connection to the PacDrive controller; the motor flange (100 mm, international standard pattern) bolts to the gearbox or coupling in the standard footprint. ## Loop tuning — electrical constants the drive needs The torque constant of 1.39 N·m/A at 120 °C gives the current-loop gain its slope: at the 1.4 A line-rated current the motor is delivering roughly the published 1.9 N·m nominal torque figure, while the 7.4 A Irms ceiling (cited) covers intermittent acceleration into the 9.6 N·m peak-stall envelope before the I²t margin closes. Stator resistance and inductance are quoted both cold and hot (9.8 Ω at 20 °C dropping to 6.82 Ω at 120 °C; 45.7 mH at 20 °C Ph/Ph against 22.85 mH at 120 °C Ph/N), which is the pair the controller's auto-tune routine relies on for a clean current loop — warm them up before any final Kp/Ki trim or the resistance term will lie. Back-EMF constant of 90 V/krpm sets the upper speed limit: above 3000 rpm the induced EMF on a 400 V-class DC bus closes in on the bus voltage, which is why the rating plate stops at 3000 rpm. ## Mechanical integration into the axis Shaft is 19 mm diameter over a 40 mm length with a 30 mm keyway and untapped end, matched to common flexible couplings for that bore size; the four-hole international-standard flange at 100 mm with a 95 mm centring collar aligns the motor to the gearbox or pillow-block without a sleeve adapter. Radial shaft load is the more demanding figure on a belt or pinion-shaft axis: 900 N at 1000 rpm, 720 N at 2000 rpm, and 630 N at 3000 rpm — derate from the 1000 rpm baseline when the pulley sits further from the face or runs through a speed increaser. The axial limit is 0.2 × Fr, so the thrust bearing on a vertical axis should not carry the full Fr figure. ## Environment, feedback, and the holding brake The ILM1001P22F0000 is sealed to IP65 with natural-convection cooling — no fan to fail in a dusty packaging environment, but derate inside a fully sealed cabinet where the motor's own heat has nowhere to go. Feedback is absolute multiturn SinCos Hiperface, so absolute position survives a power cycle without a home-return routine at every cold start; the integrated holding brake rated 5.5 N·m of static hold lets the axis hold position with the bus off, which matters on a vertical or incline axis where the controller goes into safe-torque-off. ## Sourcing posture Single-unit package quantity applies; panel-build or machine-build volumes confirm pricing breaks at quote time. No stock-holding or ships-from inventory claim is made on this listing.","metaTitle":"ILM1001P22F0000 Schneider PacDrive 3 Servo Motor, 600 W","metaDescription":"Schneider ILM1001P22F0000 PacDrive 3 ILM servo motor integrated drive, 600 W, 1.9 N·m nominal torque, 3000 rpm, IP65 — quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Drives"],"specifications":{"Length":"9.6 in (243 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Untapped","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"2.1 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"16.8 lbf.in (1.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.39 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"90 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m)","Stator inductance":"45.7 mH 68 °F (20 °C) Ph/Ph 22.85 mH 248 °F (120 °C) Ph/N","Stator resistance":"9.8 Ohm 68 °F (20 °C) Ph/Ph 6.82 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.4 A","Maximum current Irms":"7.4 A","Nominal Output Power":"600 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"22.1 lbf.in (2.5 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cf042bd40517fec82abca18dc4e362fe.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1001P22F0000/ilm-integrated-drive-100mm-1-stack-smooth-shaft-ip65-sincos-multiturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1001P22F0000/alternatives.json"},"ai":{"faq":[{"question":"What is the ILM1001P22F0000's nominal torque and speed?","answer":"1.9 N·m (16.8 lbf·in) nominal torque at a 3000 rpm nominal speed, with a 600 W continuous output rating. Peak stall is 9.6 N·m and continuous stall 2.5 N·m for sizing the acceleration profile."},{"question":"What compliance documentation ships with the ILM1001P22F0000?","answer":"On Schneider PacDrive 3 ILM integrated motors the standard declaration pack covers CE machinery-directive conformity plus UL/CSA listing; a REACH/RoHS statement ships with the units. Compliance doc on this storefront is handled against the order — request the latest declaration package at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1001P22F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1001P22F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}