{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1001P31F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1001P31F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1001P31F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1001P31F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM1001P31F0000 servo motor integrated drive, 600 W nominal output, 1.9 N·m nominal torque / 9.6 N·m peak stall, 3000 rpm, IP65, international standard flange mount.","salesMarkdown":"## Form factor and what lands on the panel The ILM1001P31F0000 is a servo motor integrated drive in Schneider Electric's PacDrive 3 ILM family — motor and drive electronics share one housing, so the panel-side wiring drops to a single power and feedback cable instead of the two-piece motor + standalone drive stack. The body runs 9.6 in (243 mm) long on a 3.9 in (100 mm) international standard flange with 0.4 in (9 mm) mounting holes and a 3.7 in (95 mm) centring collar — the bolt circle and shaft height match the standard IEC servo footprint, so a drop-in replacement sits on the existing machine base without re-machining. Cooling is natural convection — no fan, no auxiliary 24 V supply for a blower — which simplifies the cabinet layout in tight packaging and conveyor cells where forced-air ducting is impractical. ## Torque envelope — where 600 W sits Continuous output is 600 W with a nominal torque of 16.8 lbf.in (1.9 N·m) at 3000 rpm and a line rated current of 1.4 A; continuous stall torque is 22.1 lbf.in (2.5 N·m) at a continuous stall current of 1.8 A, sized for steady-state holding on indexing tables and small conveyors without thermal cutout at rated duty. Peak stall torque reaches 85.0 lbf.in (9.6 N·m) and the drive can pull 7.4 A Irms for transient acceleration — roughly 4.9× the continuous figure, which is the headroom that lets the axis survive a sticky load or a stall-recovery event without tripping the I²t foldback. The torque constant is 1.39 N·m/A at 248 °F (120 °C) — derate performance expectations against this figure, not against the cold 25 °C number on the nameplate, since winding resistance rises with temperature and torque-per-amp drifts with it. ## Feedback, brake, and shaft details Position feedback is an Absolute single-turn SinCos Hiperface encoder — multi-turn absolute positioning without an external battery module and a clean quadrature-style sine/cosine signal pair for the drive to interpolate. The motor ships with a holding brake and a keyed shaft end (1.6 in / 40 mm long, 0.7 in / 19 mm diameter, 1.2 in / 30 mm key width) but without a second shaft end — the rear face is sealed, not exposed, so don't expect to back-drive a remote encoder or tach from this unit. ## Shaft loading limits and IP65 duty Maximum radial force Fr is 900 N at 1000 rpm, dropping to 720 N at 2000 rpm and 630 N at 3000 rpm — oversizing a coupling or belt tension for the high-speed end is the usual mistake; pulley diameter and pre-load must respect the curve, not the nameplate headline figure. Maximum axial force Fa is capped at 0.2 × Fr — small enough that a thrust-bearing load from a ball screw or a worn pinion will preload the front bearing and shorten its life; budget the axial vector against 0.2 × Fr before mounting. The enclosure is IP65-rated, dust-tight and resistant to low-pressure water jets — fine for food-adjacent and washdown-adjacent conveyor and packaging cells, but not for full submergence or high-pressure steam cleaning. ## Electrical model — stator figures for the drive engineer Stator resistance is 9.8 Ω Ph/Ph at 68 °F (20 °C), 6.82 Ω Ph/N at 248 °F (120 °C); stator inductance is 45.7 mH Ph/Ph at 20 °C, 22.85 mH Ph/N at 120 °C — hot-side numbers, not cold-side, are what the drive's auto-tune loop wants in its motor model. Back-EMF constant is 90 V/krpm at 68 °F (20 °C) — at the 3000 rpm nominal ceiling the induced EMF reaches roughly 270 V, so a 400 V-class DC bus is comfortably above the back-EMF and the regenerative margin holds under braking transients.","metaTitle":"Schneider Electric ILM1001P31F0000 Servo Motor, 600 W","metaDescription":"Schneider Electric ILM1001P31F0000 PacDrive 3 servo motor integrated drive, 600 W nominal output, 7.4 A Irms peak, IP65, available to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Drives"],"specifications":{"Length":"9.6 in (243 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Keyed","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"2.1 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"16.8 lbf.in (1.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.39 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"90 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m)","Stator inductance":"45.7 mH 68 °F (20 °C) Ph/Ph 22.85 mH 248 °F (120 °C) Ph/N","Stator resistance":"9.8 Ohm 68 °F (20 °C) Ph/Ph 6.82 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.4 A","Maximum current Irms":"7.4 A","Nominal Output Power":"600 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"22.1 lbf.in (2.5 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/db094b58c1572050840f5f56a86cbf63.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1001P31F0000/ilm-integrated-drive-100mm-1-stack-keyed-shaft-ip65-sincos-singleturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1001P31F0000/alternatives.json"},"ai":{"faq":[{"question":"What does the 600 W / 9.6 N·m headline on the ILM1001P31F0000 mean for axis sizing?","answer":"600 W nominal output at 3000 rpm gives roughly 1.9 N·m continuous torque, with a 9.6 N·m peak stall headroom for acceleration transients — sized for small conveyors, indexing tables, and light packaging axes where the continuous figure, not the peak, governs the duty."},{"question":"Can the ILM1001P31F0000 replace a separate servo motor plus standalone drive?","answer":"It is referenced under its own order code in the PacDrive 3 ILM family."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1001P31F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1001P31F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}