{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1001P32F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1001P32F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1001P32F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1001P32F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series integrated servo motor, 600 W nominal, 1.9 N·m nominal torque, IP65, keyed shaft, Hiperface feedback.","salesMarkdown":"## Fit on a PacDrive 3 axis The Schneider Electric ILM1001P32F0000 is an ILM-series servo motor with integrated drive from the PacDrive 3 range — a single-cable axis block sized for 600 W nominal output at 1.4 A line current, with peak Irms of 7.4 A for acceleration bursts. ## Holding brake and feedback for safety-rated axes A 5.5 N·m holding brake is fitted as standard, paired with absolute multiturn SinCos Hiperface feedback — the brake locks the axis on de-energise and the Hiperface channel returns absolute position without a homing move on power-up, which is the usual requirement on guarded machine axes where uncontrolled drop on E-stop must be avoided. Continuous stall torque is rated at 2.5 N·m against 1.8 A continuous stall current — the difference between the continuous stall figure and the 1.9 N·m nominal at 3000 rpm is the thermal envelope a sizing engineer has to respect at zero speed, particularly when the brake is engaged and convection alone is shedding heat. ## Mounting, sealing, and shaft-side loads The motor mounts on an international standard flange with a 100 mm flange size and a 95 mm centring collar; four 9 mm mounting holes fix it through the machine frame, and the keyed shaft (19 mm diameter, 40 mm length, 30 mm key) drives the load without a second shaft end — for a typical gearbox or coupling fit, the radial load budget derates from 900 N at 1000 rpm to 630 N at 3000 rpm, with axial load capped at 0.2 × Fr. IP65 sealing on the housing supports washdown-adjacent deployment on packaging and food-grade lines, and natural convection cooling removes the need for an external fan — there is no fan cable to route and no fan-failure mode to monitor in the cabinet thermal budget. ## Electrical constants the drive has to match Stator resistance is 9.8 Ω phase-to-phase at 20 °C and back-EMF is 90 V/krpm — the PacDrive 3 drive has to be configured for those constants or the current loop will mis-tune, and the 8-pole / 1-stack winding with 45.7 mH inductance (Ph/Ph at 20 °C) sets the achievable current-loop bandwidth.","metaTitle":"ILM1001P32F0000 Schneider PacDrive 3 ILM Servo, 600 W","metaDescription":"Schneider Electric ILM1001P32F0000 PacDrive 3 integrated servo motor, 600 W, 1.9 N·m nominal, IP65, quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Drives"],"specifications":{"Length":"9.6 in (243 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Keyed","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"2.1 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"16.8 lbf.in (1.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.39 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"90 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m)","Stator inductance":"45.7 mH 68 °F (20 °C) Ph/Ph 22.85 mH 248 °F (120 °C) Ph/N","Stator resistance":"9.8 Ohm 68 °F (20 °C) Ph/Ph 6.82 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"1.4 A","Maximum current Irms":"7.4 A","Nominal Output Power":"600 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"22.1 lbf.in (2.5 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/dd9769445eebdaf219b34ad683d79535.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1001P32F0000/ilm-integrated-drive-100mm-1-stack-keyed-shaft-ip65-sincos-multiturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1001P32F0000/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to ILM1001P32F0000 in this Servo Drives family?","answer":"The only qualified cross-reference is within the PacDrive 3 ILM family itself — select on the same 100 mm flange, 600 W class, and Hiperface feedback, and confirm the brake option before specifying."},{"question":"What is ILM1001P32F0000's listed length on this Servo Drives line?","answer":"Body length on the spec sheet for the ILM1001P32F0000 is 9.6 in (243 mm), which sets the axial clearance the panel or machine frame has to allow behind the flange face."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1001P32F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1001P32F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}