{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1002P01F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1002P01F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1002P01F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1002P01F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series servo motor integrated drive, 910 W nominal output, 3000 rpm, IP54, 100 mm flange, with holding brake.","salesMarkdown":"## What's on the nameplate The ILM1002P01F0000 is a Schneider Electric PacDrive 3 ILM-series servo motor integrated drive, flange size 100 mm, body length 280 mm with a 30 mm key width and a 19 mm untapped shaft that carries no second shaft end. Feedback is absolute single-turn SinCos Hiperface and a holding brake is fitted, so the drive comes back to a defined absolute position after power cycle and holds the load at standstill without an external brake resistor. ## Where it sits in the PacDrive 3 motion stack Output is 910 W nominal at a nominal speed of 3000 rpm, with a line-rated current of 2 A and a maximum Irms of 13.1 A — the 6× headroom between continuous and peak current is what lets the motor punch above its continuous rating during accel/decel without tripping the drive. Continuous stall torque is 4.4 N·m at 2.9 A stall current, peak stall torque is 18.3 N·m, and the holding brake delivers 5.5 N·m — sized so the brake holds the load at the peak torque level during an E-stop rather than just the continuous figure. Back-EMF constant is 100 V/krpm at 20 °C and torque constant is 1.52 N·m/A at 120 °C — that 1.52 figure is what the drive's current loop converts to torque, so the controller's Iq command maps directly to mechanical output. ## Mounting, sealing, and shaft-side mechanics Mounting support is an international standard flange with 4 mounting holes at 9 mm diameter on a 95 mm centring collar, so the motor drops into a standard 100 mm flange machine without an adapter plate. IP54 ingress protection with natural convection cooling — sealed against dust and splashing water but not washdown-rated, so it belongs inside a cabinet or on a sheltered machine, not on a food-line wet zone. Maximum radial load Fr is 990 N at 1000 rpm, dropping to 790 N at 2000 rpm and 690 N at 3000 rpm; maximum axial Fa is 0.2×Fr — these curves are what decides whether the coupling or belt drive can be mounted direct without a separate bearing support.","metaTitle":"Schneider Electric ILM1002P01F0000 Servo Motor, 910 W","metaDescription":"Schneider Electric ILM1002P01F0000 PacDrive 3 ILM servo motor integrated drive, 910 W, 3000 rpm, IP54. Active production; quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"Length":"11.02 in (280 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Untapped","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"3.01 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"100 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m)","Stator inductance":"21.8 mH 68 °F (20 °C) Ph/Ph 10.9 mH 248 °F (120 °C) Ph/N","Stator resistance":"4.12 Ohm 68 °F (20 °C) Ph/Ph 2.86 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"2 A","Maximum current Irms":"13.1 A","Nominal Output Power":"910 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Continuous stall torque":"38.9 lbf.in (4.4 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.9 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f1dc9731589031a65b416fefecd9a6e1.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1002P01F0000/ilm-integrated-drive-100mm-2-stacks-smooth-shaft-sincos-singleturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1002P01F0000/alternatives.json"},"ai":{"faq":[{"question":"What is the listed length of ILM1002P01F0000 on this servo motor line?","answer":"Body length is 280 mm (11.02 in), with a 30 mm (1.2 in) key width and a 40 mm (1.6 in) shaft length — these are the mechanical envelope figures that decide whether it fits the machine's existing motor mount."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1002P01F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1002P01F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}