{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1002P22A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1002P22A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1002P22A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1002P22A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor integrated drive, 910 W, 2.9 Nm nominal, 3000 rpm, IP65, 100 mm flange.","salesMarkdown":"## What the ILM1002P22A0000 is The Schneider Electric ILM1002P22A0000 is a servo motor integrated drive from the PacDrive 3 range, device short name ILM, sized for a 100 mm motor flange. It pairs a SinCos Hiperface absolute multiturn encoder (128 periods of speed feedback resolution) directly with the drive electronics, which removes the external drive-to-motor cabling step that separates a stand-alone servo motor from a servo amplifier. ## Power, torque, and speed envelope Continuous ratings are 910 W nominal output power at 3000 rpm nominal speed, with 2.9 Nm of nominal torque and 4.4 Nm continuous stall torque, against a 2 A line-rated current. The 4.4 Nm continuous stall figure, not the 18.3 Nm peak stall torque, is the rating that governs sizing for a constant low-speed hold such as a tension reel or a clamp. Peak stall torque reaches 18.3 Nm and the inverter can deliver 13.1 A Irms, so acceleration transients — index moves, eccentric loads, punch cycles — have headroom above the continuous envelope without immediately tripping the drive. Electrical constants shape how the drive current-loop is tuned: torque constant 1.52 Nm/A, back-EMF constant 100 V/krpm, stator resistance 4.12 Ohm phase-to-phase at 20 °C dropping to 2.86 Ohm phase-to-neutral at 120 °C, and stator inductance 21.8 mH phase-to-phase at 20 °C. The thermal rise from 20 °C to 120 °C on the winding is what lifts the resistance and shifts the loop gain the commissioning engineer has to allow for. ## Mechanical integration and load limits The 100 mm international-standard flange takes four 9 mm mounting bolts on a 95 mm centring collar 3.5 mm deep, with a 19 mm untapped shaft 40 mm long and a 30 mm key width — a drop-in fit for gearboxes and couplings sized for the PacDrive 3 ILM family. Shaft end is untapped and there is no second shaft end and no holding brake, so any failsafe or backstop function has to be built into the driven machine rather than the motor. Maximum radial load is rated 990 N at 1000 rpm, 790 N at 2000 rpm, and 690 N at 3000 rpm, with axial load capped at 0.2 × Fr — these are the bearing-life limits that decide whether a belt drive, a pinion, or a direct-coupled coupling sits on the shaft. ## Cooling, ingress, and where it can be mounted Cooling is natural convection with no integrated fan, which keeps acoustic noise low but means the continuous stall torque rating assumes an ambient that lets the housing radiate heat — in a sealed cabinet the 4.4 Nm continuous figure has to be derated. Ingress protection is IP65 on the motor body, so the unit tolerates splash and dust typical of a packaging line or a washdown-adjacent cell, but it is not a fully sealed submergence rating — cable entries still have to land on the IP65 spec of the connector, not the housing thread.","metaTitle":"Schneider ILM1002P22A0000 Servo Motor, 910 W, 2.9 Nm","metaDescription":"Schneider Electric ILM1002P22A0000 PacDrive 3 ILM servo motor, 910 W, 2.9 Nm nominal, 3000 rpm, IP65. Quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM1002P22A0000","Length":"9.8 in (249 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Untapped","description":"ILM integrated drive, 100mm, 2 stacks, smooth Shaft, IP65, SinCos Multiturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"3000 rpm","Rotor inertia":"2.31 kg.cm²","Nominal torque":"25.7 lbf.in (2.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"100 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m)","Stator inductance":"21.8 mH 68 °F (20 °C) Ph/Ph 10.9 mH 248 °F (120 °C) Ph/N","Stator resistance":"4.12 Ohm 68 °F (20 °C) Ph/Ph 2.86 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"2 A","Maximum current Irms":"13.1 A","Nominal Output Power":"910 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Continuous stall torque":"38.9 lbf.in (4.4 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.9 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/909e9eb0536c90e878501dc0f63c8e16.pdf","sourceUrl":"https://www.se.com/us/en/product/ILM1002P22A0000/ilm-integrated-drive-100mm-2-stacks-smooth-shaft-ip65-sincos-multiturn-128-no-brake/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1002P22A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1002P22A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}