{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1002P32A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1002P32A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1002P32A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1002P32A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor, 910 W, 2.9 N.m nominal, 18.3 N.m peak stall, 3000 rpm, SinCos Hiperface multiturn feedback, IP65, flange mount.","salesMarkdown":"## Reading the torque envelope and where the 2.9 N.m rating actually lives The ILM1002P32A0000: Continuous stall torque lands at 38.9 lbf.in (4.4 N.m) and peak stall torque at 162.0 lbf.in (18.3 N.m), while the nominal point sits at 25.7 lbf.in (2.9 N.m) at 3000 rpm — that is the figure to size the steady-state load against, with the 18.3 N.m peak available only for short accel/decel bursts. Continuous stall current is 2.9 A and maximum current Irms is 13.1 A, so the drive sizing question is really about the 13.1 A peak channel rather than the 2.9 A nominal — confirm the PacDrive controller module can source that transient without tripping on the drive's I²t window. ## Power, back-EMF, and how fast this ILM can actually spin Feedback is Absolute multiturn SinCos Hiperface with a 128-period speed feedback resolution, which means commutation starts the moment the drive powers up — no homing move needed on every cold start, a real win for machines where the absolute position must survive a power cycle. ## Shaft loading, flange fit, and the radial force that decides bearing life Maximum radial force Fr derates with speed: 990 N at 1000 rpm, 790 N at 2000 rpm, 690 N at 3000 rpm, and maximum axial force Fa is capped at 0.2 x Fr — so a belt or pinion drive mounted outboard of the 1.6 in (40 mm) shaft has to be re-checked at the top speed, not just at the rated point, or the bearing life estimate is optimistic. Mounting is an international standard flange, 3.9 in (100 mm) motor flange size, with a 3.7 in (95 mm) centring collar 0.1 in (3.5 mm) deep and four 0.4 in (9 mm) mounting holes — that is the standard ILM bolt pattern, so a machine redesign onto a different PacDrive 3 frame can reuse the existing adapter plate. ## Thermal model, sealing, and the rotor numbers behind the curve Stator resistance shifts from 4.12 Ohm Ph/Ph at 68 °F (20 °C) to 2.86 Ohm Ph/N at 248 °F (120 °C), and stator inductance from 21.8 mH Ph/Ph at 68 °F (20 °C) to 10.9 mH Ph/N at 248 °F (120 °C) — warm-winding copper behaves very differently from cold, so a regulator tuned on a bench at room temp will look sluggish once the motor reaches its working temperature.","metaTitle":"Schneider ILM1002P32A0000 Servo Motor, 2.9 N.m, 3000 rpm","metaDescription":"Schneider Electric ILM1002P32A0000 PacDrive 3 ILM servo motor, 2.9 N.m nominal / 18.3 N.m peak, 3000 rpm, IP65, available to quote against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM1002P32A0000","Length":"9.8 in (249 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Keyed","description":"ILM integrated drive, 100mm, 2 stacks, keyed Shaft, IP65, SinCos Multiturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"3000 rpm","Rotor inertia":"2.31 kg.cm²","Nominal torque":"25.7 lbf.in (2.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"100 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m)","Stator inductance":"21.8 mH 68 °F (20 °C) Ph/Ph 10.9 mH 248 °F (120 °C) Ph/N","Stator resistance":"4.12 Ohm 68 °F (20 °C) Ph/Ph 2.86 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"2 A","Maximum current Irms":"13.1 A","Nominal Output Power":"910 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Continuous stall torque":"38.9 lbf.in (4.4 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.9 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7e1fee46cc3dadd4724ce9f9fc0770f2.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1002P32A0000/ilm-integrated-drive-100mm-2-stacks-keyed-shaft-ip65-sincos-multiturn-128-no-brake/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for ILM1002P32A0000?","answer":"No stock count, no fixed lead-time figure, and no price figure ship on this page; every one of those is tied to the specific RFQ."},{"question":"What is ILM1002P32A0000's listed length on this servo drive line?","answer":"The body length is 9.8 in (249 mm) end-to-end on the standard flange, with a 3.9 in (100 mm) flange size and a 3.7 in (95 mm) centring collar — that is the figure to clear on the machine bed or in the panel cut-out before the adapter plate is machined."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1002P32A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1002P32A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}