{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1002P32F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1002P32F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1002P32F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1002P32F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series servo motor integrated drive, 910 W, IP65, 100 mm flange, keyed shaft, 19 mm, with holding brake, Hiperface multiturn feedback.","salesMarkdown":"## What lands in the cabinet The ILM1002P32F0000 is a Schneider Electric PacDrive 3 ILM series servo motor integrated drive — the drive electronics sit on the back of the motor, so the unit drops into a panel as a single package rather than as a separate drive and motor pair. At 910 W nominal output power with a 100 mm flange and natural-convection cooling, it is sized for the compact machine axis — packaging, small-format converting, indexing tables, and similar mid-range motion loads rather than heavy gantry work. ## Torque envelope and current draw Nominal torque is 2.9 N·m at 2 A line-rated current; peak stall torque reaches 18.3 N·m at the maximum Irms of 13.1 A — roughly a 6.3× overload margin over the continuous rating, which is the budget for short accel/decel pulses typical of PacDrive 3 point-to-point moves. Continuous stall torque is 4.4 N·m at 2.9 A — higher than the nominal running torque because the natural-convection case can shed more heat at zero rpm with no rotor losses than it can at the 3000 rpm nominal speed. ## Feedback, shaft, and brake Absolute multiturn SinCos Hiperface feedback on a keyed 19 mm shaft, 40 mm long, with an integrated holding brake rated 5.5 N·m — the brake locks the axis on power-loss without a separate brake resistor or external spring-set unit. Back-EMF constant of 100 V/krpm at 20 °C and torque constant of 1.52 N·m/A at 120 °C set the drive sizing — the drive bus voltage must clear the back-EMF at top speed (≈300 V at 3000 rpm), which matters when the PacDrive 3 DC bus is shared with other axes. ## Environment and shaft load limits IP65 sealing on the body means the motor tolerates spray and dust typical of factory washdown zones near — but not inside — food or pharmaceutical lines, and the natural-convection case has no fan to fail. Maximum radial load on the shaft is 990 N at 1000 rpm, dropping to 690 N at 3000 rpm, with maximum axial load capped at 0.2 × Fr — for a belt or pinion drive this is the curve that decides whether a separate bearing support is needed.","metaTitle":"ILM1002P32F0000 Schneider PacDrive 3 servo, 910 W, IP65","metaDescription":"Schneider Electric ILM1002P32F0000 PacDrive 3 integrated servo motor, 910 W nominal, IP65, keyed shaft with holding brake. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"Length":"11.02 in (280 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Keyed","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"3.01 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"100 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m)","Stator inductance":"21.8 mH 68 °F (20 °C) Ph/Ph 10.9 mH 248 °F (120 °C) Ph/N","Stator resistance":"4.12 Ohm 68 °F (20 °C) Ph/Ph 2.86 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"2 A","Maximum current Irms":"13.1 A","Nominal Output Power":"910 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Continuous stall torque":"38.9 lbf.in (4.4 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.9 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c827620d7ee70e3d865f820e2b898ad2.pdf","sourceUrl":"https://www.se.com/be/en/product/ILM1002P32F0000/ilm-integrated-drive-100mm-2-stacks-keyed-shaft-ip65-sincos-multiturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1002P32F0000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy ILM1002P32F0000 and how do I get a price?","answer":"Quoted to order against the BOM through independent distribution — send the RFQ with the quantity and we confirm availability and pricing at quote time. Lead time and freight-included landed cost are worked out per shipment, not at list."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1002P32F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1002P32F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}