{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1003P22F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1003P22F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1003P22F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1003P22F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor integrated drive, 9 N.m holding brake, 3.5 N.m nominal, 1100 W, IP65, ILM1003P22F0000.","salesMarkdown":"## Headline output for sizing the PacDrive 3 axis The ILM1003P22F0000: The part is a Schneider Electric PacDrive 3 ILM servo motor integrated drive, flange size 100 mm, with an absolute multiturn SinCos Hiperface feedback and a holding brake built in. Continuous output power is rated 1100 W — the headline number that fixes which axis profile this motor is suited to in a PacDrive 3 machine build. ## Electrical constants the drive commissioning engineer reads off the nameplate Stator resistance is 2.6 Ohm phase-to-phase at 20 °C (1.81 Ohm phase-to-neutral at 120 °C) and stator inductance is 15.6 mH phase-to-phase at 20 °C, giving the current-loop tuning the values it actually needs at cold start versus the hot running point. Back-EMF constant is 103 V/krpm at 20 °C and torque constant is 1.61 N.m/A at 120 °C — together they set the trade between bus voltage headroom and the available torque per amp at operating temperature. Cooling is natural convection only, so the continuous stall and nominal torque figures already assume a still-air environment on the machine frame; any enclosure derating falls on top of these ratings. ## Mechanical fit to the driven load Body length is 315 mm with a 100 mm flange and 4 mounting holes on a 95 mm centring collar; shaft is 19 mm diameter by 40 mm long, untapped, with no second shaft end — gearbox and coupling selection has to land on the single output shaft. Maximum radial force is 1050 N at 1000 rpm, derating to 830 N at 2000 rpm and 730 N at 3000 rpm, and maximum axial force Fa is 0.2 x Fr — both fall with speed, which is the usual curve for belt and pinion drives; the bearing budget has to be checked at the operating rpm, not the headline speed. IP65 sealing suits plant-floor washdown and dusty packaging lines, and the integrated-drive format removes the separate drive cabinet — the motor housing carries the power stage, so the cable run to the PacDrive controller is short and the panel layout stays compact.","metaTitle":"Schneider ILM1003P22F0000 Servo Motor, 1100 W, 9 N.m","metaDescription":"Schneider Electric ILM1003P22F0000 PacDrive 3 ILM servo motor, integrated drive, 1100 W, 9 N.m holding torque, IP65. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM1003P22F0000","Length":"12.4 in (315 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Untapped","description":"ILM integrated drive, 100mm, 3 stacks, smooth Shaft, IP65, SinCos Multiturn 128, Brake","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"3.92 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m) holding brake","Nominal torque":"31.0 lbf.in (3.5 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.61 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m)","Stator inductance":"15.6 mH 68 °F (20 °C) Ph/Ph 7.8 mH 248 °F (120 °C) Ph/N","Stator resistance":"2.6 Ohm 68 °F (20 °C) Ph/Ph 1.81 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"2.4 A","Maximum current Irms":"21.2 A","Nominal Output Power":"1100 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Continuous stall torque":"51.3 lbf.in (5.8 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.6 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/be597016b23bf2a3e70bdf2140b6d808.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1003P22F0000/ilm-integrated-drive-100mm-3-stacks-smooth-shaft-ip65-sincos-multiturn-128-brake/"},"ai":{"faq":[{"question":"What is ILM1003P22F0000's listed length on this servo drive line?","answer":"The listed length is 315 mm (12.4 in), with a 100 mm flange and a 40 mm shaft — the motor is the 3-stack ILM1003 frame in the PacDrive 3 integrated-drive family."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1003P22F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1003P22F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}