{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1003P31F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1003P31F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1003P31F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1003P31F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series servo motor, 1100 W, 3.5 N.m nominal, IP65 flange mount, holding brake, Hiperface feedback, integrated drive.","salesMarkdown":"## Sizing the mechanical load against this PacDrive 3 motor The ILM1003P31F0000 is a servo motor with integrated drive from the PacDrive 3 family, short-coded ILM on the model label, so sizing decisions are made on the motor envelope rather than a separate amplifier chassis. Continuous nominal torque of 3.5 N.m and a peak stall capability of 28.3 N.m mean the same frame can ride through a normal indexing cycle and a transient stall event without oversizing the drive. Continuous stall torque of 5.8 N.m against 3.5 N.m nominal tells the integrator where the thermal envelope actually sits: a duty profile that parks the shaft near standstill is the case that stresses the windings, and the natural-convection cooling on this frame has no fan to lean on when the shaft stops. ## Current loop and the duty margin on the ILM frame Line-rated current sits at 2.4 A while peak Irms is 21.2 A and continuous stall current is 3.6 A — so the headline power of 1100 W is the nominal point on the speed-torque curve, and any short-duty overload has to be budgeted inside the Irms ceiling the drive will enforce, not the nominal number on the nameplate. Back EMF at 103 V/krpm is the value that sets when the drive's DC bus runs out of headroom at high speed, and stator resistance of 2.6 Ohm at 20 °C is what determines the I²R loss budget that feeds back into the natural-convection thermal envelope. ## Mounting, sealing, and the cabling side of the frame The 100 mm flange, 95 mm centring collar, and four 9 mm mounting holes land on a standard international flange pattern, which is the case where the panel builder is reusing an existing machine base rather than machining a new adapter plate. IP65 sealing on the body means the motor sits in washdown-adjacent zones without a separate shroud, and the Hiperface absolute single-turn encoder plus the integrated holding brake close the loop on positioning axes where a vertical load has to hold position on loss of power. Shaft geometry is keyed at 19 mm diameter with a 40 mm length and 30 mm key width, and radial load limits step from 1050 N at 1000 rpm down to 730 N at 3000 rpm — a belt-driven coupling at the high end of the speed range has to be re-checked against the derating curve, not the headline figure.","metaTitle":"Schneider Electric ILM1003P31F0000 Servo Motor, 1100 W","metaDescription":"Schneider Electric ILM1003P31F0000 PacDrive 3 ILM servo motor, 1100 W, 3.5 N.m nominal torque, IP65 flange mount, sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Drives"],"specifications":{"Length":"12.4 in (315 mm)","Category":"US1PC5218351","Key width":"1.2 in (30 mm)","Shaft end":"Keyed","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"3.92 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m) holding brake","Nominal torque":"31.0 lbf.in (3.5 N.m)","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.61 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m)","Stator inductance":"15.6 mH 68 °F (20 °C) Ph/Ph 7.8 mH 248 °F (120 °C) Ph/N","Stator resistance":"2.6 Ohm 68 °F (20 °C) Ph/Ph 1.81 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"2.4 A","Maximum current Irms":"21.2 A","Nominal Output Power":"1100 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"8","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Continuous stall torque":"51.3 lbf.in (5.8 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.6 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b9e33c1c2cacf3bb3a4dd9d51faeaed1.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1003P31F0000/ilm-integrated-drive-100mm-3-stacks-keyed-shaft-ip65-sincos-singleturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1003P31F0000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy ILM1003P31F0000 and how do I get a price?","answer":"The part is sourced through independent industrial-automation distribution against an RFQ — submit the order code with the required quantity, and current pricing plus lead time come back with the quote. No stock count, ships-today claim, or per-unit price is published here."},{"question":"What is ILM1003P31F0000's listed length on this Servo Drives line?","answer":"Length is 315 mm, paired with a 100 mm flange and a 95 mm centring collar — the frame size that the panel layout has to clear."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1003P31F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1003P31F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}