{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1401M02F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1401M02F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1401M02F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1401M02F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series servo motor with integrated drive, 140 mm flange, 8.3 N.m nominal torque, 27 N.m peak, 1300 W, SinCos Hiperface multiturn feedback, holding brake.","salesMarkdown":"## Sizing envelope for a PacDrive 3 axis The ILM1401M02F0000 sits in the PacDrive 3 ILM family as a servo motor with integrated drive — flange size 140 mm, nominal torque 8.3 N.m (73.5 lbf.in) at 1500 rpm, peaking at 27 N.m (239.0 lbf.in) when the drive pushes the 14.6 A Irms ceiling through the windings. Continuous output is rated at 1300 W with a 3.15 A line-rated current and a 3.2 A continuous stall current — the gap between continuous and peak (3.2 A vs 14.6 A) is the dynamic headroom the drive uses for accel/decel pulses, which is what makes this frame size work on cyclic packaging or indexing axes. Holding torque with the brake engaged is 18 N.m (159.3 lbf.in), exceeding the nominal torque figure so the brake can hold the load at zero speed without slipping — a 24 mm untapped shaft with no second shaft end and a 50 mm shaft length drives the coupling choice. ## Feedback, brake, and the safety-side wiring Feedback is absolute multiturn SinCos Hiperface — the position resolution comes from the encoder protocol rather than from an external homing routine, so the axis is position-known at power-on without a homing move. The holding brake is included and rated at 18 N.m — wire it through the drive's brake control output (not a separate supply) so the drive interlocks brake release with enable and applies the brake on stop categories that require it. ## Mechanical fit and shaft loading budget Mounting is international standard flange with a 130 mm centring collar, 3.5 mm depth, and four 11 mm mounting holes — the 140 mm flange and the bolt circle match the standard IEC mounting footprint for this frame. Maximum radial force Fr is 2210 N at 1000 rpm, derating to 1760 N at 2000 rpm — that derating curve is what governs pulley or pinion placement, not the headline torque number. Maximum axial force Fa is limited to 0.2 × Fr, so a belt drive with side load must stay inside that envelope or the bearings take the penalty. ## Sourcing posture for this build For a quote against the BOM, the unit ships as a single piece per package with natural-convection cooling — no external fan to derate around in a sealed cabinet.","metaTitle":"Schneider Electric ILM1401M02F0000 Servo Motor, 8.3 N.m","metaDescription":"Schneider Electric ILM1401M02F0000 PacDrive 3 ILM servo motor, 8.3 N.m nominal / 27 N.m peak, 1300 W, SinCos Hiperface feedback, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"Length":"11.5 in (292 mm)","Category":"US1PC5218351","Key width":"1.6 in (40 mm)","Shaft end":"Untapped","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"1500 rpm","Rotor inertia":"7.41 kg.cm²","Holding torque":"159.3 lbf.in (18 N.m) holding brake","Nominal torque":"73.5 lbf.in (8.3 N.m)","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.65 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"175 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m)","Stator inductance":"50 mH 68 °F (20 °C) Ph/Ph 25 mH 248 °F (120 °C) Ph/N","Stator resistance":"4.58 Ohm 68 °F (20 °C) Ph/Ph 3.18 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"3.15 A","Maximum current Irms":"14.6 A","Nominal Output Power":"1300 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"10","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"75.2 lbf.in (8.5 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"2210 N 1000 rpm 1760 N 2000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"3.2 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ba625738d8f2351e5a20b6e5d38c851b.pdf","sourceUrl":"https://www.se.com/be/en/product/ILM1401M02F0000/ilm-integrated-drive-140mm-1-stack-high-torque-smooth-shaft-sincos-multiturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1401M02F0000/alternatives.json"},"ai":{"faq":[{"question":"What is the listed length of ILM1401M02F0000?","answer":"Length is 11.5 in (292 mm) for this ILM frame — the 140 mm flange, 130 mm centring collar, and 50 mm shaft length together define the axial envelope to clear behind the motor and through the mounting plate."},{"question":"What is the closest alternative in the PacDrive 3 ILM family for ILM1401M02F0000?","answer":"No pin-compatible LTB successor is declared. The functional alternative is the adjacent ILM frame in the same PacDrive 3 family — a different stator stack length and therefore a different torque constant — mounted in the same 140 mm international-standard flange."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1401M02F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1401M02F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}