{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1401M12A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1401M12A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1401M12A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1401M12A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric ILM1401M12A0000, PacDrive 3 series ILM integrated servo motor, 8.3 N.m nominal, 27 N.m peak, 1300 W, keyed shaft, IP54, Hiperface feedback.","salesMarkdown":"## Lifecycle status — still in production, quoted to order The part's lifecycle stage reads as current on the OEM record, so the ILM1401M12A0000 is on the active Schneider Electric line for the PacDrive 3 family and is specified against current production drives rather than legacy stock. Procurement posture for an active PacDrive 3 motor is quoted-to-order against the BOM — the part is not held as a stocked shelf item here, and lead time plus volume pricing come back through an RFQ rather than off a live inventory feed. ## Torque envelope and where this motor slots in a PacDrive 3 line The motor carries 8.3 N.m nominal torque (75.2 lbf.in continuous stall) with 27 N.m peak stall — that ratio is what dictates the load class the ILM1401M12A0000 can accelerate on a PacDrive 3 axis, and it lands in the mid-power bracket for handling, pick-and-place, and small-format converting machinery. At 1300 W nominal output and 3.15 A line-rated current against a 14.6 A Irms peak, the motor runs comfortably in the AC servo mid-band — sizing the upstream drive means matching the Irms ceiling to the motor's instantaneous demand rather than the 1300 W continuous figure. ## Drive tuning — constants, inertia, and the feedback bus Stator resistance of 4.58 Ohm per phase at 20 °C dropping to 3.18 Ohm per phase-to-neutral at 120 °C tells the thermal headroom story — copper drops with temperature, so loop gains are programmed against the 120 °C figure, not the cold bench reading. Feedback is absolute multiturn SinCos Hiperface with 128 periods of resolution, which is what the PacDrive 3 controller expects for commutation and absolute position retention at power-on without a homing move. ## Mechanical fit — flange, shaft, and shaft loading Mounting is the international standard 140 mm flange with a 130 mm centring collar and four 11 mm bolt holes, so the ILM1401M12A0000 drops into the standard PacDrive 3 footprint without a custom adapter plate. The shaft is 24 mm diameter, 50 mm long, keyed with a 1.6 in key width and no second shaft end — coupling selection has to match 24 mm keyed, not the plain-cylindrical or alternative keyway variants in the same series. Shaft loading limits are 2210 N radial at 1000 rpm derating to 1760 N at 2000 rpm, with axial force capped at 0.2 × radial — those curves decide belt tension, gear pinion loads, and whether a direct-drive coupling sits inside the envelope. ## Cabinet duty and cooling Cooling is natural convection only — no integrated fan — which means cabinet ventilation and a heatsinking coupling or machine frame do the thermal work, and IP54 sealing limits the environment to dust-protected and light splash rather than washdown.","metaTitle":"Schneider ILM1401M12A0000 PacDrive 3 Servo Motor, 1300 W","metaDescription":"Schneider ILM1401M12A0000 PacDrive 3 ILM integrated servo motor, 8.3 N.m nominal, 27 N.m peak, 1300 W, keyed shaft, IP54.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM1401M12A0000","Length":"10 in (254 mm)","Category":"US1PC5218351","Key width":"1.6 in (40 mm)","Shaft end":"Keyed","description":"ILM integrated drive, 140mm, 1 stack, high Torque, keyed Shaft, SinCos Multiturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"1500 rpm","Rotor inertia":"7.41 kg.cm²","Nominal torque":"73.5 lbf.in (8.3 N.m)","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.65 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"175 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m)","Stator inductance":"50 mH 68 °F (20 °C) Ph/Ph 25 mH 248 °F (120 °C) Ph/N","Stator resistance":"4.58 Ohm 68 °F (20 °C) Ph/Ph 3.18 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"3.15 A","Maximum current Irms":"14.6 A","Nominal Output Power":"1300 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"10","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"75.2 lbf.in (8.5 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"2210 N 1000 rpm 1760 N 2000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"3.2 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/088c090df961bd666df0a0458f35bb1b.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1401M12A0000/ilm-integrated-drive-140mm-1-stack-high-torque-keyed-shaft-sincos-multiturn-128-no-brake/"},"ai":{"faq":[{"question":"What is the listed length of ILM1401M12A0000?","answer":"10 in (254 mm) front-to-back — the standard PacDrive 3 ILM frame length that drops into the 140 mm flange pattern with no adapter."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1401M12A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1401M12A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}