{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1401M21F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1401M21F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1401M21F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1401M21F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series integrated servo motor, ILM1401M21F0000, 8.3 N·m nominal torque, 27 N·m peak, 1300 W, 140 mm flange, IP65.","salesMarkdown":"## An all-in-one motor/drive with a 140 mm flange footprint The Schneider Electric ILM1401M21F0000 is a PacDrive 3 series ILM servo motor with an integrated drive stage, built around an international standard flange with a 5.5 in (140 mm) motor flange size and a body length of 11.5 in (292 mm), so it drops into a standard NEMA-style machine mount without adapter plates. Natural convection cooling is the only thermal path on the unit, which keeps the cabinet clean of fans and ducting — but it also means the continuous torque rating assumes the mounting surface acts as a heatsink, and a stuffed enclosure will pull continuous torque down long before it trips the peak figure. ## Torque, speed, and what the 1300 W envelope actually means on the line Continuous stall torque lands at 8.5 N·m with a continuous stall current of 3.2 A and a line-rated current of 3.15 A, while peak stall torque reaches 27 N·m and the drive can deliver a maximum Irms of 14.6 A — that's roughly a 3× overload headroom for short accel/decel bursts on a conveyor index or a small press feed. Nominal torque is 8.3 N·m at the rated 1500 rpm, which lines up with the 1300 W nominal output power — pick a gearbox or pulley ratio off the 8.3 N·m figure for steady-state sizing, and reserve the 27 N·m peak only for short move profiles where duty cycle stays below the thermal ceiling. ## Feedback, brake, and shaft detail for the panel-builder Position feedback is an absolute single-turn SinCos Hiperface encoder, so the controller reads absolute shaft position on power-up with no homing routine — appropriate for indexed motion where losing position after an E-stop would cost a re-home cycle. A holding brake is fitted and rated 18 N·m holding torque, paired with a 24 mm untapped shaft and a 2.0 in (50 mm) shaft length with one keyway at 1.6 in (40 mm) width — there is no second shaft end, so any auxiliary encoder or hand-crank decoupler needs its own bracket. Maximum radial load is 2210 N at 1000 rpm, dropping to 1760 N at 2000 rpm, and maximum axial force is capped at 0.2 × Fr — a belt drive with too much pre-tension will eat the bearings long before the drive ever faults. ## Sealing, electrical constants, and what IP65 actually buys you IP65 sealing on the motor body suits washdown-adjacent areas and most outdoor enclosures, but it is not IP67 — high-pressure hot-water cleaning directly on the unit will eventually defeat the seal. Stator resistance reads 4.58 Ohm phase-to-phase at 20 °C and 3.18 Ohm phase-to-neutral at 120 °C, with stator inductance of 50 mH Ph/Ph at 20 °C and 25 mH Ph/N at 120 °C — these are the values to feed into a torque-loop or field-weakening model, and the temperature coefficient is significant enough that a cold-start tune will drift once the motor warms up.","metaTitle":"Schneider Electric ILM1401M21F0000 PacDrive 3 Servo Motor","metaDescription":"Schneider Electric ILM1401M21F0000 PacDrive 3 ILM integrated servo motor, 8.3 N·m nominal / 27 N·m peak, 24 mm shaft, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Length":"11.5 in (292 mm)","IP Rating":"IP65","Product Status":"Active","Shaft Diameter":"0.9 in (24 mm)","Shaft End Type":"Untapped","Max Axial Force Fa N":"0.2 x Fr","Max Radial Force Fr N":"2210 N 1000 rpm 1760 N 2000 rpm","Centring Collar Diameter":"5.1 in (130 mm)","Main Product Or Component Type":"Servo motor integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/08a0fe6b8be4d54f975c98ca070bc64a.pdf","sourceUrl":"https://www.se.com/be/en/product/ILM1401M21F0000/ilm-integrated-drive-140mm-1-stack-high-torque-smooth-shaft-ip65-sincos-singleturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1401M21F0000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1401M21F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1401M21F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}