{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1401M22A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1401M22A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1401M22A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1401M22A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor with integrated drive, 1300 W nominal output, 8.3 N·m nominal torque, Hiperface multiturn feedback, IP65, 140 mm flange, order code ILM1401M22A0000.","salesMarkdown":"## Integrated servo axis in the PacDrive 3 line The ILM1401M22A0000: Servo motor with integrated drive in the PacDrive 3 range, device short name ILM, built around a 5.5 in (140 mm) international-standard flange and a 10-pole rotor in a single motor stack. Size for the axis: 1300 W nominal output at 1500 rpm, 8.3 N·m nominal torque and 8.5 N·m continuous stall torque, peaking at 27 N·m when the drive delivers its 14.6 A rms maximum current — the envelope the PacDrive controller will command in the S-curve profile. Feedback is absolute multiturn SinCos Hiperface at 128 periods of speed feedback resolution, so absolute position survives a power cycle without a homing move on restart — the reason it drops onto a PacDrive 3 machine as a single-cable absolute axis. ## Mechanical fit on the machine bed Body length is 10 in (254 mm) with a 1.6 in (40 mm) key width on the shaft and a 24 mm shaft diameter; the 50 mm shaft length is untapped and there is no second shaft end, so any auxiliary encoder or handwheel has to couple through the primary shaft or a belt stage. International-standard flange with a 130 mm centring collar at 3.5 mm depth and four 11 mm mounting holes — drop-in to a standard 140-frame mounting footprint common across the ILM family. Shaft load limits: maximum radial force Fr is 2210 N at 1000 rpm dropping to 1760 N at 2000 rpm, with maximum axial force Fa capped at 0.2 × Fr — direct-coupling applications stay comfortably inside the envelope, but a belt or pinion drive needs the radial force derated against these numbers before the bearing life is signed off. ## Electrical and thermal envelope for commissioning Line-rated current 3.15 A at continuous stall (3.2 A continuous stall current) and 14.6 A rms peak — the drive sizing must hold the rms demand below 3.15 A through the duty cycle, with the 14.6 A ceiling reserved for acceleration transients only. Back-EMF constant 175 V/krpm at 68 °F (20 °C) and torque constant 2.65 N·m/A at 248 °F (120 °C) — the two numbers the commissioning engineer loads into the PacDrive controller to scale current command to mechanical torque, and the hot-side value is the one to use because the motor reaches thermal steady state well above ambient. Stator winding 4.58 Ohm phase-to-phase at 68 °F (20 °C), falling to 3.18 Ohm at 248 °F (120 °C), with 50 mH phase-to-phase inductance at 20 °C — copper resistance drops ~30 % from cold to hot, so the cold-loop resistance check overestimates winding losses. Natural-convection cooling with IP65 sealing — the motor is built for cabinet-adjacent and field-mount duty where forced airflow over the housing is not available, and the IP65 rating means the cable entry and shaft seal hold up to water-jet washdown, not full submergence. ## Production status and the BOM line Package quantity is one unit per pack — on a packaging-machinery BOM this part consumes one per axis, so a four-axis machine is a four-unit line item; qualified-part status and per-unit landed cost both flow through a single BOM row. Independent distribution quoted to order against the BOM: lead time, MOQ, and volume pricing confirmed at RFQ, with full manufacturer traceability on each shipment — the right posture for an active, qualified servo frame rather than a stock-shelf claim.","metaTitle":"Schneider ILM1401M22A0000 servo motor, 1300 W, IP65","metaDescription":"Schneider Electric ILM1401M22A0000 integrated servo motor from the PacDrive 3 range: 1300 W, 8.3 N·m nominal, Hiperface multiturn, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Length":"10 in (254 mm)","IP Rating":"IP65","Feedback Type":"Absolute multiturn SinCos Hiperface","Product Status":"Active","Shaft Diameter":"0.9 in (24 mm)","Shaft End Type":"Untapped","Max Axial Force Fa N":"0.2 x Fr","Max Radial Force Fr N":"2210 N 1000 rpm 1760 N 2000 rpm","Centring Collar Diameter":"5.1 in (130 mm)","Main Product Or Component Type":"Servo motor integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ae0a7a7761f11c9e5c5ddf62e5af3c99.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1401M22A0000/ilm-integrated-drive-140mm-1-stack-high-torque-smooth-shaft-ip65-sincos-multiturn-128-no-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1401M22A0000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1401M22A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1401M22A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}