{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1401P02A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1401P02A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1401P02A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1401P02A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM integrated servo motor, 4.6 N.m nominal, 3000 rpm, 140 mm flange, IP54, SinCos Hiperface feedback.","salesMarkdown":"## What's in the box when you bolt this down The ILM1401P02A0000 is a Schneider Electric PacDrive 3 ILM integrated servo motor/drive — drive electronics and motor in one 254 mm long, 140 mm flange package, so the cabinet builder drops a single unit instead of a separate drive-and-motor pair. Lifecycle is current per the manufacturer record, so a panel quoting it today isn't pinning the BOM to a phase-out window. ## Torque envelope and where it lives on the speed curve Continuous torque is 4.6 N.m at 3000 rpm, so this is a mid-range axis — sized for packaging, indexing, and light converting lines rather than heavy machine-tool spindle duty. Peak stall torque of 27 N.m gives roughly 5.9x overload headroom for acceleration transients, which is what dictates whether the axis can punch through the move profile without the drive tripping on Irms. Continuous stall current is 4.7 A and nominal line current is 2.9 A, with a maximum Irms of 18.8 A — the drive sizing math always works off Irms, not the nominal figure, because that's what governs the acceleration profile. Torque constant of 1.6 N.m/A at 120 °C winding is the back-of-envelope check: peak torque divided by Kt gives the peak current the controller will command. ## Feedback, electrical constants, and what they tell the commissioning engineer Feedback is absolute multiturn SinCos Hiperface at 128 periods resolution — the controller reads absolute position from power-up, no homing move needed, which removes a startup step on every machine restart. Stator resistance is 1.81 Ω phase-to-phase at 20 °C, dropping the back-EMF constant to 108 V/krpm at the same reference temperature — drive bus sizing follows from that constant times top speed. ## Shaft loads and the mechanical envelope Shaft is 24 mm diameter x 50 mm long, untapped, with no second shaft end — coupling selection is straightforward, no keyseat to align. Maximum radial load is 2210 N at 1000 rpm, derating linearly to 1530 N at 3000 rpm, and axial load is capped at 0.2x Fr — overhung pulley or belt loads need that derating checked against the operating rpm before the coupling gets ordered. ## Mounting footprint that drives the panel layout International standard flange mount with a 130 mm centring collar and four 11 mm mounting holes on the 140 mm flange — a standard machine-tool foot pattern, so it drops onto the same bracket as the previous-generation ILM. Centring collar depth is 3.5 mm; the pilot registers cleanly into a mating flange bore before the bolts take load.","metaTitle":"Schneider Electric ILM1401P02A0000 servo motor, 4.6 N.m","metaDescription":"Schneider Electric ILM1401P02A0000 PacDrive 3 ILM integrated servo motor, 4.6 N.m nominal at 3000 rpm, 140 mm flange, IP54. Lifecycle current, quoted to RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM1401P02A0000","Length":"10 in (254 mm)","Category":"US1PC5218351","Key width":"1.6 in (40 mm)","Shaft end":"Untapped","description":"ILM integrated drive, 140mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"3000 rpm","Rotor inertia":"7.41 kg.cm²","Nominal torque":"40.7 lbf.in (4.6 N.m)","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.6 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"108 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m)","Stator inductance":"19.1 mH 68 °F (20 °C) Ph/Ph 9.55 mH 248 °F (120 °C) Ph/N","Stator resistance":"1.81 Ohm 68 °F (20 °C) Ph/Ph 1.26 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"2.9 A","Maximum current Irms":"18.8 A","Nominal Output Power":"1450 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"10","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"66.4 lbf.in (7.5 N.m)","IP Degree of Protection":"IP54","Maximum radial force Fr":"2210 N 1000 rpm 1760 N 2000 rpm 1530 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4.7 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f5f769e1e1f3bfc64a8c91b77e7069c7.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1401P02A0000/ilm-integrated-drive-140mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for ILM1401P02A0000?","answer":"It's quoted to order against the BOM through independent distribution — submit an RFQ with the quantity and the lead time you need, and current pricing plus availability comes back with the quote. No stock count, no ships-today promise; just a clean quoted-to-order posture on a current-lifecycle part."},{"question":"What is ILM1401P02A0000's listed length on this Servo Drives line?","answer":"Body length is 10 in (254 mm) per the published spec — a mid-stack ILM that fits between the shorter ILM070/ILM100 frames and the longer 190 mm flange units. Confirm the cabinet envelope against this figure before specifying, since the integrated-drive design doesn't allow length adjustment the way a separate motor-and-drive pair would."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1401P02A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1401P02A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}