{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1401P31F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1401P31F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1401P31F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1401P31F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM1401P31F0000 integrated servo motor, 1450 W nominal, 4.6 N.m, 24 mm keyed shaft, IP65, natural convection.","salesMarkdown":"## PacDrive 3 integrated drive in a 140 mm flange The Schneider Electric ILM1401P31F0000 is an integrated servo motor and drive from the PacDrive 3 range, with the drive electronics packaged directly into the motor housing rather than mounted separately in the panel — so the cabinet layout collapses to the motor and the connecting cable, not a stand-alone amplifier chassis beside it. It bolts to the machine through an international-standard 140 mm flange, with a 130 mm centring collar and four 11 mm mounting holes; the 292 mm body length and the 24 mm keyed shaft are the two numbers that decide whether it physically drops into the existing bracket and coupling on the line. ## Continuous 4.6 N.m, 1450 W, 3000 rpm envelope Continuous torque is 4.6 N.m at 2.9 A nominal current, climbing to 7.5 N.m continuous stall at 4.7 A — meaning the motor can hold that torque indefinitely at zero speed with the rotor locked, which matters for vertical-axis or tension-control loads where the motor is parked under load for long periods. Peak torque reaches 27 N.m for the acceleration and deceleration transients, drawing up to 18.8 A Irms from the drive — so the sizing question is whether the machine's worst-case accel/decel cycle fits inside that 27 N.m envelope without tripping the drive on peak current. Nominal output power is 1450 W at 3000 rpm, with the 1.6 N.m/A torque constant at 120 °C winding temperature — the constant is the figure that converts amps commanded by the drive into torque at the shaft, and the 120 °C reference temperature means the real-world torque at a colder 25 °C winding is fractionally higher. ## Hiperface feedback, integrated brake, IP65 sealing Position feedback is an absolute single-turn SinCos Hiperface encoder, so absolute position survives a power cycle without re-homing — a practical benefit on packaging and converting lines where the machine must know its position the instant the E-stop is released, not after a return-to-reference move. The motor ships with an 18 N.m holding brake and without a second shaft end; the brake is the safety element for vertical axes and the absence of a rear shaft extension means any hand-crank or manual override has to engage through a coupling on the front keyed shaft. IP65 sealing on the body and natural-convection cooling mean the motor runs without an external fan — the housing sheds heat through its own surface area, so the cabinet or shroud around it must not blanket the fins. IP65 covers dust-tight and low-pressure water-jet washdown, which is the rating needed for food, beverage, and pharmaceutical lines where the motor sits inside the wash zone. ## Stator and shaft-load numbers that govern sizing Stator resistance drops from 1.81 Ω phase-to-phase at 20 °C to 1.26 Ω phase-to-neutral at 120 °C, and inductance falls from 19.1 mH to 9.55 mH over the same span — the high-temperature figures are what the drive's current loop actually sees in steady-state operation, and they govern the loop bandwidth the controller can close without instability. Maximum radial load is 2210 N at 1000 rpm, falling to 1530 N at 3000 rpm, with axial load capped at 0.2 × Fr — those limits protect the front bearing and the shaft, and a timing-belt or pinion drive that exceeds them at top speed is the classic cause of premature bearing failure on this class of motor.","metaTitle":"Schneider ILM1401P31F0000 PacDrive 3 servo motor, 1450 W","metaDescription":"Schneider Electric ILM1401P31F0000 PacDrive 3 integrated servo motor, 1450 W, 4.6 N.m nominal, IP65, quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Length":"11.5 in (292 mm)","IP Rating":"IP65","Product Status":"Active","Shaft Diameter":"0.9 in (24 mm)","Shaft End Type":"Keyed","Max Axial Force Fa N":"0.2 x Fr","Max Radial Force Fr N":"2210 N 1000 rpm 1760 N 2000 rpm 1530 N 3000 rpm","Centring Collar Diameter":"5.1 in (130 mm)","Main Product Or Component Type":"Servo motor integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5eb676a053e3dc143504996099c1739c.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1401P31F0000/ilm-integrated-drive-140mm-1-stack-keyed-shaft-ip65-sincos-singleturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1401P31F0000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1401P31F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1401P31F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}