{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1401P32A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1401P32A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1401P32A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1401P32A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor, 4.6 N.m nominal, 27 N.m peak, 1450 W, IP65 flange mount, keyed shaft, Hiperface feedback.","salesMarkdown":"## Where this ILM sits in the PacDrive 3 lineup The Schneider Electric ILM1401P32A0000 is a servo motor with integrated drive from the PacDrive 3 family, flange size 5.5 in (140 mm) with an international standard flange and natural convection cooling, so it bolts straight into a machine frame without a separate blower or cold plate. It carries the ILM short name and PacDrive 3 range designation, with one motor stack and ten poles, putting it in the mid-frame bracket of the integrated-drive lineup rather than the high-inertia or high-speed variants. ## Torque envelope and current draw Continuous nominal torque is 4.6 N.m (40.7 lbf.in) at 2.9 A line-rated current, with a continuous stall torque of 7.5 N.m at 4.7 A — meaning the motor holds rated output on a stalled shaft without tripping its own thermal ceiling. Peak stall torque reaches 27 N.m (239.0 lbf.in) at a maximum Irms of 18.8 A, which is roughly 6× the nominal current — the acceleration headroom a packaging or indexing axis needs to come out of a dwell without stalling the drive. Nominal output power is 1450 W at 3000 rpm nominal speed, so on a constant-torque load the motor runs flat-rated up to base speed before the field-weakening region takes over. ## Feedback, electrical constants, and shaft-side loads Position feedback is an absolute multiturn SinCos Hiperface encoder at 128 periods resolution, so the drive knows absolute shaft angle on power-up without a homing move — useful for machine axes that lose reference after an E-stop. Back-EMF constant is 108 V/krpm at 20 °C and torque constant is 1.6 N.m/A at 120 °C, with stator resistance of 1.81 Ohm phase-to-phase at 20 °C dropping to 1.26 Ohm phase-to-neutral at 120 °C — figures the drive's auto-tuning loop uses to set the current-loop gains without manual entry. Maximum radial shaft load is 2210 N at 1000 rpm derating to 1530 N at 3000 rpm, and maximum axial force is capped at 0.2 × Fr — so a belt or pinion drive needs a bearing arrangement that keeps the side load inside the envelope at top speed. ## Mechanical envelope and IP rating Overall length is 10 in (254 mm) with a 5.5 in (140 mm) flange, key width 1.6 in (40 mm), shaft diameter 0.9 in (24 mm) and shaft length 2.0 in (50 mm), keyed shaft with no second shaft end and no holding brake — a through-shaft mounted pinion or coupling is the expected coupling arrangement. Centring collar diameter 5.1 in (130 mm) with 0.1 in (3.5 mm) depth and four 0.4 in (11 mm) mounting holes match the standard PacDrive 3 bolt pattern, and IP65 sealing on the housing means the body tolerates hose-down and plant washdown as long as the cable entry is mated to an equivalently rated connector.","metaTitle":"Schneider ILM1401P32A0000 servo motor, 4.6 N.m, 1450 W","metaDescription":"Schneider Electric ILM1401P32A0000 PacDrive 3 ILM servo motor, 4.6 N.m nominal torque, 27 N.m peak, 1450 W, IP65. Available to order; quoted against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM1401P32A0000","Length":"10 in (254 mm)","Category":"US1PC5218351","Key width":"1.6 in (40 mm)","Shaft end":"Keyed","description":"ILM integrated drive, 140mm, 1 stack, keyed Shaft, IP65, SinCos Multiturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"3000 rpm","Rotor inertia":"7.41 kg.cm²","Nominal torque":"40.7 lbf.in (4.6 N.m)","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.6 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"108 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m)","Stator inductance":"19.1 mH 68 °F (20 °C) Ph/Ph 9.55 mH 248 °F (120 °C) Ph/N","Stator resistance":"1.81 Ohm 68 °F (20 °C) Ph/Ph 1.26 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"2.9 A","Maximum current Irms":"18.8 A","Nominal Output Power":"1450 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"10","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"1","Continuous stall torque":"66.4 lbf.in (7.5 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"2210 N 1000 rpm 1760 N 2000 rpm 1530 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4.7 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1736c9ac6c75efc0ae7df47a9cf8b526.pdf","sourceUrl":"https://www.se.com/us/en/product/ILM1401P32A0000/ilm-integrated-drive-140mm-1-stack-keyed-shaft-ip65-sincos-multiturn-128-no-brake/"},"ai":{"faq":[{"question":"What torque and current ratings define the ILM1401P32A0000's fit?","answer":"Continuous nominal torque is 4.6 N.m at 2.9 A with a 7.5 N.m continuous stall at 4.7 A, peak stall 27 N.m at 18.8 A Irms, and 1450 W output at 3000 rpm — that envelope is what decides whether the motor covers a given axis without oversizing the drive."},{"question":"Does the ILM1401P32A0000 carry a holding brake or a second shaft end?","answer":"No on both counts — the entry lists no holding brake and no second shaft end, so any vertical-axis safety stop has to come from the upstream drive's brake control and the mechanical arrangement, not from a brake integrated in the motor."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1401P32A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1401P32A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}