{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1401P32F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1401P32F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1401P32F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1401P32F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM servo motor integrated drive, 140 mm flange, 4.6 N.m nominal / 27 N.m peak, 1450 W, IP65, keyed shaft, absolute multiturn SinCos Hiperface feedback, holding brake.","salesMarkdown":"## 4.6 N.m nominal torque in a 140 mm integrated drive The Schneider Electric ILM1401P32F0000 is a servo motor integrated drive in the PacDrive 3 family, built on the ILM device short name platform with a 140 mm flange and IP65 sealing suitable for cabinet-edge mounting on packaging, material handling, and machine-tool axes where the drive electronics live on the motor back rather than in a separate cabinet. Continuous stall torque of 7.5 N.m drops to a nominal torque of 4.6 N.m at 3000 rpm, delivering 1450 W of nominal output power — so the sizing envelope is roughly mid-range in the PacDrive 3 lineup, appropriate for conveyors, indexing tables, and small format-fed axes where 4.6 N.m continuous covers the steady-state load and 27 N.m peak covers the accel/decel transients. The peak-stall figure of 27 N.m is roughly 5.9× the continuous stall figure of 7.5 N.m — that ratio is what allows the axis to ride through inertial accel events without saturating the current loop, and it is the number the sizing spreadsheet usually checks first. ## Winding and current envelope Line-rated current of 2.9 A and a maximum Irms of 18.8 A define the drive-side sizing — the upstream servo drive must deliver short-term current up to that 18.8 A ceiling to reach the 27 N.m peak torque figure; under-sizing the drive current trips the peak-torque limit before the motor itself does. Stator resistance measures 1.81 Ohm phase-to-phase at 20 °C and falls to 1.26 Ohm phase-to-neutral at 120 °C, while stator inductance reads 19.1 mH phase-to-phase at 20 °C and 9.55 mH phase-to-neutral at 120 °C — these are the cold/hot corners the drive commissioning tool wants for the auto-tune pass, and the resistance change with temperature is what the I²R loss budget tracks through the warm-up cycle. Torque constant of 1.6 N.m/A at 120 °C and back-EMF constant of 108 V/krpm at 20 °C together set the relationship between commanded current, motor speed, and the DC-bus voltage headroom the drive has to keep above the back-EMF at top speed. ## Mechanical interface and feedback The output shaft is 24 mm diameter, 50 mm long, keyed with a 40 mm key width, and built without a second shaft end — so the coupling and any belt pulley or pinion mount on the drive side only, and the holding brake handles the no-power position-hold duty on vertical or inclined axes. Absolute multiturn SinCos Hiperface feedback means the controller reads absolute position across power cycles without a homing routine on every restart, and the Hiperface protocol carries the motor nameplate data over the same cable so the PacDrive 3 drive auto-configures on first connection. Mounting follows the international standard flange pattern with a 130 mm centring collar at 3.5 mm depth and four 11 mm mounting holes — that flange geometry is the integration reference for gearbox and right-angle-adapter selection, and it matches the standard PacDrive 3 ILM footprint across the series. ## Mechanical load limits and thermal envelope Maximum radial force Fr is rated 2210 N at 1000 rpm, 1760 N at 2000 rpm, and 1530 N at 3000 rpm — so a belt or pulley applying radial load to the shaft end must be sized against the speed at which the axis actually runs, not the static figure; running at 3000 rpm with a high belt tension is the worst corner. Maximum axial force Fa is capped at 0.2 × Fr, which is conservative enough that vertical-mounted axes with a coupling or a small thrust bearing stay inside the envelope without a separate thrust limit calculation. Cooling is natural convection, with IP65 sealing on the body — meaning the motor relies on its housing surface for heat rejection and tolerates dust and low-pressure water jets, but it is not rated for washdown immersion or high-pressure spray; cabinet placement should leave clearance around the housing for airflow. ## Sourcing posture Lifecycle status is recorded as current per the spec record, with no official successor or cross-reference on file.","metaTitle":"Schneider ILM1401P32F0000 Servo Motor, 4.6 N.m, 1450 W","metaDescription":"Schneider ILM1401P32F0000 PacDrive 3 ILM servo motor, 4.6 N.m nominal, 27 N.m peak, 1450 W, IP65, Hiperface feedback. Quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Length":"11.5 in (292 mm)","IP Rating":"IP65","Feedback Type":"Absolute multiturn SinCos Hiperface","Product Status":"Active","Shaft Diameter":"0.9 in (24 mm)","Shaft End Type":"Keyed","Max Axial Force Fa N":"0.2 x Fr","Max Radial Force Fr N":"2210 N 1000 rpm 1760 N 2000 rpm 1530 N 3000 rpm","Centring Collar Diameter":"5.1 in (130 mm)","Main Product Or Component Type":"Servo motor integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f522a38e43c64704a0b10da1c684897d.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1401P32F0000/ilm-integrated-drive-140mm-1-stack-keyed-shaft-ip65-sincos-multiturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1401P32F0000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1401P32F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1401P32F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}