{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1402P31A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1402P31A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1402P31A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1402P31A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM integrated-drive servo motor, 9.1 N.m nominal torque, 1910 W, Hiperface SinCos feedback, 140 mm flange, IP65, ILM1402P31A0000.","salesMarkdown":"## Frame, feedback, and what this motor is The ILM1402P31A0000: The part is a Schneider Electric PacDrive 3 ILM servo motor with integrated drive electronics, identified by the short name ILM and a 140 mm flange (5.5 in). Feedback is Hiperface SinCos absolute single-turn with 128-period resolution, mated to a keyed shaft (24 mm diameter, 50 mm length) and supplied without a holding brake or a second shaft end — important for retrofit and dimension checks against existing PacDrive 3 cells. ## Torque, speed, and the sizing envelope Continuous ratings are 9.1 N.m nominal torque (80.5 lbf.in) at 2000 rpm and 12.5 N.m continuous stall torque (110.6 lbf.in), drawing 3.7 A nominal and 4.8 A continuous stall; peak stall reaches 55 N.m (486.8 lbf.in) at 24 A Irms for the acceleration/transient window of a motion profile. Mechanical output is 1910 W continuous, supported by a torque constant of 2.6 N.m/A and a back-EMF constant of 173 V/krpm — the latter sets the bus-voltage headroom the PacDrive 3 controller must hold at top speed. ## Winding, thermal, and electrical constants Stator resistance is 1.9 Ohm phase-to-phase at 20 °C (1.32 Ohm phase-to-neutral at 120 °C) and stator inductance is 22 mH at 20 °C Ph/Ph (11 mH at 120 °C Ph/N), which is the data the controller uses to tune the current loop and the thermal model on commissioning. Cooling is natural convection (no integrated fan), so the motor relies on the mounting flange and surrounding enclosure for heat rejection — derating starts when the flange cannot shed the I²R losses at high duty cycles. ## Mechanical envelope and shaft-side loading Overall length is 309 mm (12.2 in) with an international standard flange, 4 mounting holes at 11 mm diameter, a 130 mm centring collar recessed 3.5 mm — the flange pattern is what determines whether it drops into an existing PacDrive 3 machine footprint without a re-machined adapter plate. Shaft loading limits are 2430 N radial at 1000 rpm and 1930 N radial at 2000 rpm, with axial force capped at 0.2 × Fr — pulley and pinion choices must respect both numbers, especially in belt-driven or geared packaging-line retrofits. ## Environment and what IP65 covers here IP65 sealing means the motor body resists dust ingress and low-pressure water jets, so it can sit near washdown zones or on machine frames where coolant and cutting fluid are present — but it is not rated for high-pressure or high-temperature cleaning, and the feedback connector must be mated with its specified IP-rated cordset to keep the rating.","metaTitle":"Schneider Electric ILM1402P31A0000 PacDrive 3 Servo Motor","metaDescription":"Schneider Electric ILM1402P31A0000 PacDrive 3 ILM servo motor, 9.1 N.m nominal, 1910 W, Hiperface feedback, IP65. Quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Drives"],"specifications":{"Length":"12.2 in (309 mm)","Category":"US1PC5218351","Key width":"1.6 in (40 mm)","Shaft end":"Keyed","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"Without","Nominal speed":"2000 rpm","Rotor inertia":"12.68 kg.cm²","Nominal torque":"80.5 lbf.in (9.1 N.m)","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.6 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"173 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"486.8 lbf.in (55 N.m)","Stator inductance":"22 mH 68 °F (20 °C) Ph/Ph 11 mH 248 °F (120 °C) Ph/N","Stator resistance":"1.9 Ohm 68 °F (20 °C) Ph/Ph 1.32 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"3.7 A","Maximum current Irms":"24 A","Nominal Output Power":"1910 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"10","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Continuous stall torque":"110.6 lbf.in (12.5 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"2430 N 1000 rpm 1930 N 2000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4.8 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0e760317b08060b5a41139de3ba09246.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1402P31A0000/ilm-integrated-drive-140mm-2-stacks-keyed-shaft-ip65-sincos-singleturn-128-no-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1402P31A0000/alternatives.json"},"ai":{"faq":[{"question":"Who supplies the ILM1402P31A0000 and how is it quoted for volume purchases?","answer":"This part is sourced through independent industrial-automation distribution rather than a single channel, with pricing and lead time confirmed against the BOM at RFQ — no public per-unit price or stock figure is asserted on this page."},{"question":"What compliance documentation ships with the ILM1402P31A0000?","answer":"The compliance documents (RoHS, REACH, UL, IEC) supplied with this ILM servo motor are not listed in the available spec record — the datasheet and the manufacturer's declaration of conformity are the source of those certifications, and would need to be obtained at the time of order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1402P31A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1402P31A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}