{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1402P31F0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1402P31F0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1402P31F0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1402P31F0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM integrated servo motor, 9.1 N.m nominal torque, 1910 W output, IP65 flange-mount, Hiperface feedback, with holding brake.","salesMarkdown":"## Match the motor envelope to the motion axis ILM1402P31F0000 is a Schneider Electric PacDrive 3 ILM integrated servo motor — the drive is housed on the back of the machine, so a single part number ships a complete axis instead of a separate amplifier-and-motor pair. Continuous torque is 9.1 N.m with a 55 N.m peak stall ceiling and 1910 W nominal output; for a sizing pass, the continuous figure — not the peak — is the number that has to clear the RMS load over the duty cycle, because the peak is only reachable inside the short-term overload window. ## Sizing the winding against the supply and the load Nominal current is 3.7 A with a 24 A Irms peak at 80.5 lbf.in continuous; the 2.6 N.m/A torque constant means a 9.1 N.m continuous shaft load sits at roughly 3.5 A on the winding — well inside the 3.7 A nominal envelope. Stator resistance is 1.9 Ohm phase-to-phase at 20 °C with 22 mH phase-to-phase inductance; with a 173 V/krpm back-EMF constant, the motor reaches its 2000 rpm nominal speed at around 346 V of applied DC bus — a number worth eyeballing if the axis is being retrofitted onto a non-PacDrive amplifier. ## Feedback, brake, and the panel-side wiring Absolute single-turn SinCos Hiperface feedback gives absolute position on power-up without a homing move — a real time-saver on changeover if the line restarts cold; the integrated holding brake adds 23 N.m of static holding, which needs to be released through the drive's dedicated brake output before any attempt to jog the axis. Natural-convection cooling on a 140 mm flange with IP65 sealing means the motor breathes through its housing only — a clean mounting surface and an unobstructed body are required for the rated continuous torque, and the IP65 rating covers splash and dust ingress in a packaged-foods washdown zone but not submersion. The keyed 24 mm shaft with a 50 mm length and the keyed-only second shaft omitted from the catalogue designation — single-shaft end is the production line with no opposite-side extension to balance against; the 140 mm flange with 4 x 11 mm mounting holes on a 130 mm centring collar drops onto a standard IEC mounting footprint. ## Lifecycle status and the BOM line Body length is 13.7 in (347 mm) on a 1.6 in (40 mm) body width; cabinet depth needs to be cleared against this before the panel is laid out — and any cabinet retrofit from a previous ILM frame should be checked against the 347 mm figure rather than assumed onto the older ILM1401 / ILM1403 length footprint.","metaTitle":"Schneider ILM1402P31F0000 Servo Motor, 9.1 N.m, 1910 W","metaDescription":"Schneider Electric ILM1402P31F0000 PacDrive 3 ILM integrated servo motor, 9.1 N.m nominal, 1910 W output. IP65, Hiperface feedback.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Length":"13.7 in (347 mm)","IP Rating":"IP65","Product Status":"Active","Shaft Diameter":"0.9 in (24 mm)","Shaft End Type":"Keyed","Max Axial Force Fa N":"0.2 x Fr","Max Radial Force Fr N":"2430 N 1000 rpm 1930 N 2000 rpm","Centring Collar Diameter":"5.1 in (130 mm)","Main Product Or Component Type":"Servo motor integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cc05a34f23c82c177dc279a823a124ca.pdf","sourceUrl":"https://www.se.com/be/en/product/ILM1402P31F0000/ilm-integrated-drive-140mm-2-stacks-keyed-shaft-ip65-sincos-singleturn-128-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILM1402P31F0000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1402P31F0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1402P31F0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}