{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILM1402P32A0000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILM1402P32A0000","canonicalUrl":"https://aoctrl.com/schneider/ILM1402P32A0000","factsUrl":"https://aoctrl.com/api/mcp/products/ILM1402P32A0000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric PacDrive 3 ILM series servo motor integrated drive, 9.1 N·m nominal, 1910 W, IP65, keyed shaft, order code ILM1402P32A0000.","salesMarkdown":"## Headline torque envelope at a glance The ILM1402P32A0000 is a PacDrive 3 ILM-series servo motor integrated drive carrying 9.1 N·m of nominal torque at 2000 rpm with a 1910 W continuous output rating, sized for high-dynamic automation axes that have to hold position under load. The peak stall envelope of 55 N·m against a continuous stall of 12.5 N·m — roughly a 4.4× overload factor — is what gives the axis its acceleration headroom; the line rated current of 3.7 A versus a maximum Irms of 24 A sets the same envelope on the electrical side, so the drive's current loop must be sized to deliver the 24 A transient without tripping. ## Feedback and motor electrical constants for the drive loop Feedback is absolute multiturn SinCos Hiperface at 128 periods of resolution, so the drive gets absolute position at power-on with no homing move — relevant when commissioning time on the install line is tight. Back-EMF is 173 V/krpm at 20 °C and torque constant is 2.6 N·m/A at 120 °C — the drive must run the current loop against the temperature-compensated Kt, not the cold figure; the stator winding shifts from 1.9 Ω Ph/Ph cold to 1.32 Ω Ph/N hot and from 22 mH Ph/Ph to 11 mH Ph/N, so the current-loop bandwidth will drift with thermal soak and should be re-tuned after the first hour of loaded running. ## Mechanical fit and shaft-load budget Frame size is 140 mm flange with a 309 mm body length, a 24 mm keyed shaft at 50 mm length, and the international standard flange with four 11 mm mounting holes on a 130 mm centring collar — drop-in for any PacDrive 3 axis that already calls out an ILM1402 mechanical envelope. This variant ships without a holding brake and without a second shaft end, so an external holding brake or back-up encoder must be specified separately if the axis needs a safety-rated stop function.","metaTitle":"Schneider ILM1402P32A0000 PacDrive 3 servo motor, 9.1 N·m","metaDescription":"Schneider Electric ILM1402P32A0000 PacDrive 3 ILM servo motor integrated drive, 9.1 N·m nominal torque, 1910 W, IP65. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Drives"],"specifications":{"title":"ILM1402P32A0000","Length":"12.2 in (309 mm)","Category":"US1PC5218351","Key width":"1.6 in (40 mm)","Shaft end":"Keyed","description":"ILM integrated drive, 140mm, 2 stacks, keyed Shaft, IP65, SinCos Multiturn 128, no Brake","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"2000 rpm","Rotor inertia":"12.68 kg.cm²","Nominal torque":"80.5 lbf.in (9.1 N.m)","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.6 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Range of Product":"PacDrive 3","Back emf constant":"173 V/krpm 68 °F (20 °C)","Device short name":"ILM","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"486.8 lbf.in (55 N.m)","Stator inductance":"22 mH 68 °F (20 °C) Ph/Ph 11 mH 248 °F (120 °C) Ph/N","Stator resistance":"1.9 Ohm 68 °F (20 °C) Ph/Ph 1.32 Ohm 248 °F (120 °C) Ph/N","Line Rated Current":"3.7 A","Maximum current Irms":"24 A","Nominal Output Power":"1910 W","Centring collar depth":"0.1 in (3.5 mm)","Nbr. of units in pkg.":"1","Number of motor poles":"10","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Continuous stall torque":"110.6 lbf.in (12.5 N.m)","IP Degree of Protection":"IP65","Maximum radial force Fr":"2430 N 1000 rpm 1930 N 2000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4.8 A","Number of mounting holes":"4","Product or Component Type":"Servo motor integrated drive","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"250...700 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/81d7c5b63cacbac8e6176c190ced167d.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILM1402P32A0000/ilm-integrated-drive-140mm-2-stacks-keyed-shaft-ip65-sincos-multiturn-128-no-brake/"},"ai":{"faq":[{"question":"What is the nominal torque and continuous power of the ILM1402P32A0000?","answer":"Nominal torque is 9.1 N·m at 2000 rpm with a continuous output of 1910 W. The continuous stall torque is 12.5 N·m at 4.8 A, and the peak stall torque is 55 N·m with a maximum Irms of 24 A — the drive sizing has to clear the 24 A transient, not just the 3.7 A nominal line current."},{"question":"What feedback and shaft options ship on this variant?","answer":"Feedback is absolute multiturn SinCos Hiperface at 128-period resolution. The shaft is 24 mm keyed at 50 mm length with 40 mm keyway width, no second shaft end, and no holding brake — any safety-rated hold function has to come from an external brake specified separately."},{"question":"What mechanical envelope and shaft load does the ILM1402P32A0000 carry?","answer":"Frame is 140 mm flange with a 309 mm overall length, international standard flange mounting via four 11 mm holes on a 130 mm centring collar. Maximum radial load is 2430 N at 1000 rpm dropping to 1930 N at 2000 rpm, with axial load capped at 0.2 × Fr — coupling and overhung-mass geometry must respect that envelope."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILM1402P32A0000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILM1402P32A0000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}