{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILS1F853TB1A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILS1F853TB1A0","canonicalUrl":"https://aoctrl.com/schneider/ILS1F853TB1A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILS1F853TB1A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Lexium integrated drive ILS1F853TB1A0, 3-phase stepper motor, 36 V DC, CANopen DS301, 4.5 Nm torque, 6 poles, IP41, flange 85 mm, CE.","salesMarkdown":"## Overview Shock rated at 150 m/s² over 1000 shocks per IEC 60068-2-29, the unit is built for applications where mechanical vibration and intermittent impact are present. This integrated stepper combines motor, drive, and CANopen interface in a single housing — no separate drive cabinet or cabling between motor and amplifier. The CANopen protocol supports transmission rates from 50 to 1000 kbauds, configurable for multi-axis coordination on a shared bus. Positioning accuracy is rated at +/- 6 arc minutes, with a rotor inertia of 3.3 kg.cm². The holding torque of 4.5 Nm at standstill gives the motor enough stiffness to hold a load without a brake in many indexing applications. Feedback is via an index pulse only — no absolute encoder, so the controller must home on power-up. The unit includes safe torque off, output voltage short-circuit protection, and overload protection as standard. Cooling is by natural convection, so no forced air is required in normal duty cycles. ## Applications Integrated stepper drives of this class are used in packaging, labeling, pick-and-place, and small assembly machines where a compact, single-cable motion axis is needed. The CANopen bus allows multiple ILS drives to be daisy-chained and coordinated from a PLC or motion controller without a dedicated motion card per axis. The ILS1F853TB1A0 sits in Schneider's Lexium integrated drive range, which targets machine builders who want to reduce panel space and wiring complexity compared to a separate drive and motor pair. It competes with other integrated steppers in the 36 V, 4.5 Nm class, offering CANopen as the primary fieldbus. The ILS1F853TB1A0 carries CE marking and is listed to EN 61800-3, IEC 50347, IEC 50178, and IEC 60072-1. No lifecycle status (active, NRND, or obsolete) is explicitly stated in the available evidence; sourcing inquiries should confirm current production status and lead time with a distributor.","metaTitle":"Schneider ILS1F853TB1A0 Lexium Integrated Stepper Motor, 36 V, CANopen","metaDescription":"Schneider Lexium ILS1F853TB1A0 integrated stepper motor: 36 V DC, CANopen, 4.5 Nm torque, 6 poles, IP41, CE marked. Shock rated 150 m/s² per IEC 60068-2-29.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Unclassified"],"specifications":{"Phase":"Single phase","Length":"7.9 in (200.6 mm)","Marking":"CE","Category":"US1PC5618288","Shaft end":"Untapped","Standards":"EN 61800-3 : 2001-02 IEC 50347 EN 61800-3:2001, second environment IEC 50178 IEC 60072-1 IEC 61800-3, Ed 2 IEC 61800-3","Motor Type":"3-phase stepper motor","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Winding type":"High speed of rotation and medium torque","Feedback type":"Index pulse","Gear box type":"Without","Holding brake":"Without","Nominal speed":"100 rpm 24 V 300 rpm 36 V","Rotor inertia":"3.3 kg.cm²","Accuracy error":"+/- 6 arc min","Holding torque":"39.8 lbf.in (4.5 N.m)","Nominal torque":"39.8 lbf.in (4.5 N.m)","Shaft diameter":"0.6 in (14 mm)","Protection Type":"Safe torque off Short circuit of the output voltage Overload of output voltage","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange 85 mm","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks IEC 60068-2-29","Device short name":"ILS","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"3.3 in (85 mm)","Peak stall torque":"39.8 lbf.in (4.5 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"50, 100, 125, 250, 500, 800 and 1000 kbauds","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"6000 mA maximum","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...40 V","Associated fuse rating":"10 A","Discrete input current":"10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"170 N tensile force) 30 N force pressure)","Number of motor stacks":"3","Communication interface":"CANopen DS301, Integrated","Continuous stall torque":"39.8 lbf.in (4.5 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"110 N","Mounting holes diameter":"0.3 in (6.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Maximum mechanical speed":"2000 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"20000 points/turn","[Us] rated supply voltage":"36 V 24 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating)","Circle diameter of the mounting holes":"3.9 in (99 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,295.00 – $2,042.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4de20960f92c2c6040f04ca5a80d4808.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ILS1F853TB1A0/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILS1F853TB1A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILS1F853TB1A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}